Re: error!when install proftpd-.12.8rc2 on FreeBSD Release 5

[Akim Demaille]

| hi,
|  this is a error report.
|  
| Best Regards!
|  
| Edward
|  
| system information:
| kuanpin# uname -a
| FreeBSD kuanpin.zzvcom.com 5.0-RELEASE FreeBSD 5.0-RELEASE #0: Sun Feb 16
| 20:22:12 CST 2003     address@hidden:/usr/src/sys/i386/compile/IPFQUOTA 
| i386
| ----------------
| proftpd error info:

Thanks for the report, but please, send it to the package maintainers,
not to Autoconf lists (contrary to the message) as it's a configure.ac
problem, as stated in the following piece of Autoconf documentation.

      Previous versions of Autoconf merely checked whether the header was
   accepted by the preprocessor.  This was changed because the old test was
   inappropriate for typical uses.  Headers are typically used to compile,
   not merely to preprocess, and the old behavior sometimes accepted
   headers that clashed at compile-time.  If you need to check whether a
   header is preprocessable, you can use `AC_PREPROC_IFELSE' (*note
   Running the Preprocessor::).
   
      This scheme, which improves the robustness of the test, also requires
   that you make sure that headers that must be included before the
   HEADER-FILE be part of the INCLUDES, (*note Default Includes::).  If
   looking for `bar.h', which requires that `foo.h' be included before if
   it exists, we suggest the following scheme:
   
   
   AC_CHECK_HEADERS([foo.h])
   AC_CHECK_HEADERS([bar.h], [], [],
   [#if HAVE_FOO_H
   # include <foo.h>
   # endif
   ])


| kuanpin#
| kuanpin# ./configure
| checking build system type... i386-unknown-freebsd5.0
| checking host system type... i386-unknown-freebsd5.0
| checking target system type... i386-unknown-freebsd5.0
| checking for gcc... gcc
| checking for C compiler default output... a.out
| checking whether the C compiler works... yes
| checking whether we are cross compiling... no
| checking for suffix of executables...
| checking for suffix of object files... o
| checking whether we are using the GNU C compiler... yes
| checking whether gcc accepts -g... yes
| checking for gcc option to accept ANSI C... none needed
| checking whether make sets $(MAKE)... yes
| checking for a BSD-compatible install... /usr/bin/install -c
| checking for ranlib... ranlib
| checking for special C compiler options needed for large files... no
| checking for _FILE_OFFSET_BITS value needed for large files... no
| checking for _LARGE_FILES value needed for large files... no
| checking whether the C compiler accepts -Wall... yes
| checking for standalone crypt... no
| checking for crypt in -lcrypt... yes
| checking for standalone gethostbyname... yes
| checking for standalone inet_aton... yes
| checking for standalone nsl functions... yes
| checking for standalone socket functions... yes
| checking for _pw_stayopen variable... no
| checking for set_auth_parameters in -lsecurity... no
| checking for setprpwent in -lsec... no
| checking how to run the C preprocessor... gcc -E
| checking for egrep... grep -E
| checking for ANSI C header files... yes
| checking for sys/types.h... yes
| checking for sys/stat.h... yes
| checking for stdlib.h... yes
| checking for string.h... yes
| checking for memory.h... yes
| checking for strings.h... yes
| checking for inttypes.h... yes
| checking for stdint.h... yes
| checking for unistd.h... yes
| checking sys/security.h usability... no
| checking sys/security.h presence... no
| checking for sys/security.h... no
| checking krb.h usability... no
| checking krb.h presence... no
| checking for krb.h... no
| checking prot.h usability... no
| checking prot.h presence... no
| checking for prot.h... no
| checking for set_auth_parameters... no
| checking for getprpwent... no
| checking hpsecurity.h usability... no
| checking hpsecurity.h presence... no
| checking for hpsecurity.h... no
| checking for hpsecurity.h workaround... no
| checking for dirent.h that defines DIR... yes
| checking for library containing opendir... none required
| checking for ANSI C header files... (cached) yes
| checking for sys/wait.h that is POSIX.1 compatible... yes
| checking fcntl.h usability... yes
| checking fcntl.h presence... yes
| checking for fcntl.h... yes
| checking sys/ioctl.h usability... yes
| checking sys/ioctl.h presence... yes
| checking for sys/ioctl.h... yes
| checking sys/time.h usability... yes
| checking sys/time.h presence... yes
| checking for sys/time.h... yes
| checking for unistd.h... (cached) yes
| checking for memory.h... (cached) yes
| checking shadow.h usability... no
| checking shadow.h presence... no
| checking for shadow.h... no
| checking security/pam_appl.h usability... yes
| checking security/pam_appl.h presence... yes
| checking for security/pam_appl.h... yes
| checking pam/pam_appl.h usability... no
| checking pam/pam_appl.h presence... no
| checking for pam/pam_appl.h... no
| checking for pam_start in -lpam... yes
| checking whether to enable mod_cap... no
| checking ctype.h usability... yes
| checking ctype.h presence... yes
| checking for ctype.h... yes
| checking getopt.h usability... yes
| checking getopt.h presence... yes
| checking for getopt.h... yes
| checking crypt.h usability... no
| checking crypt.h presence... no
| checking for crypt.h... no
| checking bstring.h usability... no
| checking bstring.h presence... no
| checking for bstring.h... no
| checking for strings.h... (cached) yes
| checking limits.h usability... yes
| checking limits.h presence... yes
| checking for limits.h... yes
| checking for sys/types.h... (cached) yes
| checking sys/mount.h usability... no
| checking sys/mount.h presence... yes
| configure: WARNING: sys/mount.h: present but cannot be compiled
| configure: WARNING: sys/mount.h: check for missing prerequisite headers?
| configure: WARNING: sys/mount.h: proceeding with the preprocessor's result
| configure: WARNING:     ## ------------------------------------ ##
| configure: WARNING:     ## Report this to address@hidden ##
| configure: WARNING:     ## ------------------------------------ ##
| checking for sys/mount.h... yes
| checking sys/param.h usability... yes
| checking sys/param.h presence... yes
| checking for sys/param.h... yes
| checking sys/file.h usability... yes
| checking sys/file.h presence... yes
| checking for sys/file.h... yes
| checking sys/uio.h usability... yes
| checking sys/uio.h presence... yes
| checking for sys/uio.h... yes
| checking netdb.h usability... yes
| checking netdb.h presence... yes
| checking for netdb.h... yes
| checking netinet/in.h usability... yes
| checking netinet/in.h presence... yes
| checking for netinet/in.h... yes
| checking netinet/tcp.h usability... yes
| checking netinet/tcp.h presence... yes
| checking for netinet/tcp.h... yes
| checking arpa/inet.h usability... yes
| checking arpa/inet.h presence... yes
| checking for arpa/inet.h... yes
| checking for sys/stat.h... (cached) yes
| checking errno.h usability... yes
| checking errno.h presence... yes
| checking for errno.h... yes
| checking sys/socket.h usability... yes
| checking sys/socket.h presence... yes
| checking for sys/socket.h... yes
| checking sys/termios.h usability... yes
| checking sys/termios.h presence... yes
| checking for sys/termios.h... yes
| checking sys/termio.h usability... no
| checking sys/termio.h presence... no
| checking for sys/termio.h... no
| checking sys/statvfs.h usability... yes
| checking sys/statvfs.h presence... yes
| checking for sys/statvfs.h... yes
| checking sys/vfs.h usability... no
| checking sys/vfs.h presence... no
| checking for sys/vfs.h... no
| checking sys/select.h usability... yes
| checking sys/select.h presence... yes
| checking for sys/select.h... yes
| checking dirent.h usability... yes
| checking dirent.h presence... yes
| checking for dirent.h... yes
| checking ndir.h usability... no
| checking ndir.h presence... no
| checking for ndir.h... no
| checking sys/ndir.h usability... no
| checking sys/ndir.h presence... no
| checking for sys/ndir.h... no
| checking sys/dir.h usability... yes
| checking sys/dir.h presence... yes
| checking for sys/dir.h... yes
| checking vmsdir.h usability... no
| checking vmsdir.h presence... no
| checking for vmsdir.h... no
| checking utmpx.h usability... no
| checking utmpx.h presence... no
| checking for utmpx.h... no
| checking regex.h usability... yes
| checking regex.h presence... yes
| checking for regex.h... yes
| checking syslog.h usability... yes
| checking syslog.h presence... yes
| checking for syslog.h... yes
| checking curses.h usability... yes
| checking curses.h presence... yes
| checking for curses.h... yes
| checking ncurses.h usability... yes
| checking ncurses.h presence... yes
| checking for ncurses.h... yes
| checking for an ANSI C-conforming const... yes
| checking for inline... inline
| checking for uid_t in sys/types.h... yes
| checking for pid_t... yes
| checking for size_t... yes
| checking for mode_t... yes
| checking for off_t... yes
| checking type of array argument to getgroups... gid_t
| checking for timer_t... yes
| checking for short... yes
| checking size of short... 2
| checking for int... yes
| checking size of int... 4
| checking for long... yes
| checking size of long... 4
| checking for long long... yes
| checking size of long long... 8
| checking for off_t... (cached) yes
| checking size of off_t... 8
| checking whether time.h and sys/time.h may both be included... yes
| checking whether struct tm is in sys/time.h or time.h... time.h
| checking for umode_t... no
| checking for ino_t... yes
| checking for socklen_t... yes
| checking utmp.h usability... yes
| checking utmp.h presence... yes
| checking for utmp.h... yes
| checking whether your struct utmp has ut_user... no
| checking whether your struct utmp has ut_host... yes
| checking whether your struct utmp has ut_exit... no
| checking whether your syslog.h defines LOG_CRON... yes
| checking whether your syslog.h defines LOG_FTP... yes
| checking for d_fd in DIR structure... no
| checking for dd_fd in DIR structure... yes
| checking for working alloca.h... no
| checking for alloca... yes
| checking for alloca in -lgen... no
| checking whether gcc needs -traditional... no
| checking whether setpgrp takes no argument... no
| checking return type of signal handlers... void
| checking for vprintf... yes
| checking for _doprnt... no
| checking for bcopy... yes
| checking for crypt... yes
| checking for fgetgrent... no
| checking for fgetpwent... no
| checking for flock... yes
| checking for getcwd... yes
| checking for gethostname... yes
| checking for getopt... yes
| checking for getopt_long... yes
| checking for gettimeofday... yes
| checking for inet_aton... yes
| checking for memcpy... yes
| checking for mempcpy... no
| checking for mkdir... yes
| checking for mkstemp... yes
| checking for rmdir... yes
| checking for select... yes
| checking for setgroups... yes
| checking for socket... yes
| checking for statfs... yes
| checking for strchr... yes
| checking for strcoll... yes
| checking for strerror... yes
| checking for strsep... yes
| checking for strtol... yes
| checking for setprotoent... yes
| checking for endprotoent... yes
| checking for vsnprintf... yes
| checking for snprintf... yes
| checking for setsid... yes
| checking for setgroupent... yes
| checking for seteuid... yes
| checking for setegid... yes
| checking for siginterrupt... yes
| checking for setpgid... yes
| checking for regcomp... yes
| checking for tzset... yes
| checking for pathconf... yes
| checking for fpathconf... yes
| checking for fgetspent... no
| checking for setpassent... yes
| checking for initscr in -lcurses... yes
| checking for initscr in -lncurses... yes
| checking for setproctitle... yes
| checking libutil.h usability... yes
| checking libutil.h presence... yes
| checking for libutil.h... yes
| checking for setproctitle in -lutil... yes
| configure: creating ./config.status
| config.status: creating lib/Makefile
| config.status: creating src/Makefile
| config.status: creating modules/Makefile
| config.status: creating utils/Makefile
| config.status: creating Makefile
| config.status: creating Make.rules
| config.status: creating config.h
| config.status: config.h is unchanged
| config.status: executing default commands
|  
|  
|  
| E-mail:address@hidden
|  
|