bug-autoconf
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

configure WARNING + failure to configure 'ar' properly


From: Hatcher, Andy
Subject: configure WARNING + failure to configure 'ar' properly
Date: Thu, 17 Apr 2003 07:58:15 -0700

Running configure from ntp-4.1.74 src on Solaris 2.8.
 
[This message came out twice.]
 
configure: WARNING: net/if.h: present but cannot be compiled
configure: WARNING: net/if.h: check for missing prerequisite headers?
configure: WARNING: net/if.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to
address@hidden. ##
configure: WARNING:     ## ------------------------------------ ##
When attempting to compile libntp, everything worked up until the 'ar' step.
 
rm -f libntp.a
ar cru libntp.a systime.o a_md5encrypt.o adjtime.o atoint.o atolfp.o atouint.o audio.o authkeys.o authreadkeys.o authusekey.o binio.o buftvtots.o caljulian.o calleapwhen.o caltontp.o calyearstart.o clocktime.o clocktypes.o decodenetnum.o dofptoa.o dolfptoa.o emalloc.o findconfig.o fptoa.o fptoms.o getopt.o gpstolfp.o hextoint.o hextolfp.o humandate.o icom.o ieee754io.o inttoa.o iosignal.o lib_strbuf.o machines.o md5c.o memmove.o mfp_mul.o mfptoa.o mfptoms.o mktime.o modetoa.o mstolfp.o msutotsf.o msyslog.o netof.o ntp_rfc2553.o numtoa.o numtohost.o octtoint.o prettydate.o ranny.o recvbuff.o refnumtoa.o snprintf.o socktoa.o socktohost.o statestr.o strdup.o strerror.o strstr.o syssignal.o tsftomsu.o tstotv.o tvtoa.o tvtots.o uglydate.o uinttoa.o utvtoa.o ymd2yd.o
/bin/bash: ar: command not found
make: *** [libntp.a] Error 127
 
 
ar is in /usr/ccs/bin, but we use the gnu tools almost exclusively so /usr/ccs/bin is not in most peoples paths.
--
Andy Hatcher
address@hidden
 
 

reply via email to

[Prev in Thread] Current Thread [Next in Thread]