bugreport

[Roman E. Golub]

Warning on configure proftpd1.2.8  (compiled and worked well)

configure: WARNING: sys/mount.h: present but cannot be compiled
configure: WARNING: sys/mount.h: check for missing prerequisite headers?
configure: WARNING: sys/mount.h: proceeding with the preprocessor's
result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##

# dmesg
OpenBSD 3.3 (GENERIC) #44: Sat Mar 29 13:22:05 MST 2003
    address@hidden:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium 4 ("GenuineIntel" 686-class) 2.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,
MMX,FXSR,SIMD,3DNOW
real mem  = 1071493120 (1046380K)
avail mem = 988725248 (965552K)
using 4278 buffers containing 53678080 bytes (52420K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 11/15/02, BIOS32 rev. 0 @
0xf0010
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf4630/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB PCI-ISA" rev
0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xb200!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845G/GL" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82845G/GL Video" rev 0x03: aperture
at 0xf0000000, size 0x8000000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x02: irq 9
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
"Intel 82801DB USB" rev 0x02 at pci0 dev 29 function 7 not configured
ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x82
pci1 at ppb0 bus 1
fxp0 at pci1 dev 8 function 0 "Intel PRO/100 VE" rev 0x82: irq 11,
address 00:07:e9:8f:0a:3e
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
pcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y120L0>
wd0: 16-sector PIO, LBA, 117246MB, 16383 cyl, 16 head, 63 sec, 240121728
sectors
wd1 at pciide0 channel 0 drive 1: <Maxtor 6Y120L0>
wd1: 16-sector PIO, LBA, 117246MB, 16383 cyl, 16 head, 63 sec, 240121728
sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ASUS, CD-S520/A, 2.0K> SCSI0 5/cdrom
removable
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801DB SMB" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ca60 netmask ca60 ttymask cae2
pctr: user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302