report a bug

[freemen2]

Hi,

Look I'm new to Linux so I'm not used to doing this.  Saw the alert
message below as I was trying to get a soft w/ emerge in Gentoo so here
it is.  If you need something else feel free to e-mail me.  Actually if
I'm doinf the wrong thing e-mail me.  I'm learning here ;)

Steph

---------------------
configure: WARNING: linux/time.h: present but cannot be compiled
configure: WARNING: linux/time.h: check for missing prerequisite headers?
configure: WARNING: linux/time.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
---------------------


Please see the rsync(1) and rsyncd.conf(5) man pages for full documentation
See http://rsync.samba.org/ for updates, bug reports, and answers
bash-2.05b# emerge hotwayd*
Calculating dependencies ...done!
> > > emerge (1 of 2) sys-apps/xinetd-2.3.11 to /
> > > Downloading 
http://gentoo.oregonstate.edu/distfiles/xinetd-2.3.11.tar.gz
--02:43:02--  http://gentoo.oregonstate.edu/distfiles/xinetd-2.3.11.tar.gz
           => `/usr/portage/distfiles/xinetd-2.3.11.tar.gz'
Resolving gentoo.oregonstate.edu... done.
Connecting to gentoo.oregonstate.edu[128.193.0.3]:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 289,867 [application/x-tar]

100%[====================================================>] 289,867
   4.08K/s    ETA 00:00

02:44:12 (4.08 KB/s) - `/usr/portage/distfiles/xinetd-2.3.11.tar.gz'
saved [289867/289867]

> > > md5 src_uri ;-) xinetd-2.3.11.tar.gz
> > > Unpacking source...
> > > Unpacking xinetd-2.3.11.tar.gz to /var/tmp/portage/xinetd-2.3.11/work
> > > Source unpacked.
configure: WARNING: If you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used.
checking build system type... i686-pc-linux-gnu
checking host system type... i486-pc-linux-gnu
checking target system type... i486-pc-linux-gnu
checking for i486-pc-linux-gnu-gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for a BSD-compatible install... /bin/install -c
checking for i486-pc-linux-gnu-ranlib... no
checking for ranlib... ranlib
checking for main in -lcompat... no
checking for gethostbyname... yes
checking for getnameinfo... yes
checking for inet_ntop... yes
checking for difftime... yes
checking for fcvt... yes
checking for ecvt... yes
checking for gcvt... yes
checking for strerror... yes
checking for strcasecmp... yes
checking for socket... yes
checking for inet_aton... yes
checking for setenv... yes
checking for strsignal... yes
checking for sys_siglist in -lc... yes
checking for gai_strerror... yes
checking for freeaddrinfo... yes
checking for getaddrinfo... yes
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for sys/types.h... (cached) yes
checking sys/termios.h usability... yes
checking sys/termios.h presence... yes
checking for sys/termios.h... yes
checking termios.h usability... yes
checking termios.h presence... yes
checking for termios.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/select.h usability... yes
checking sys/select.h presence... yes
checking for sys/select.h... yes
checking rpc/rpc.h usability... yes
checking rpc/rpc.h presence... yes
checking for rpc/rpc.h... yes
checking rpc/rpcent.h usability... no
checking rpc/rpcent.h presence... no
checking for rpc/rpcent.h... no
checking sys/file.h usability... yes
checking sys/file.h presence... yes
checking for sys/file.h... yes
checking ftw.h usability... yes
checking ftw.h presence... yes
checking for ftw.h... yes
checking machine/reg.h usability... no
checking machine/reg.h presence... no
checking for machine/reg.h... no
checking linux/time.h usability... no
checking linux/time.h presence... yes
configure: WARNING: linux/time.h: present but cannot be compiled
configure: WARNING: linux/time.h: check for missing prerequisite headers?
configure: WARNING: linux/time.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for linux/time.h... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking sys/resource.h usability... yes
checking sys/resource.h presence... yes
checking for sys/resource.h... yes
checking arpa/inet.h usability... yes
checking arpa/inet.h presence... yes
checking for arpa/inet.h... yes
checking grp.h usability... yes
checking grp.h presence... yes
checking for grp.h... yes
checking rpc/pmap_clnt.h usability... yes
checking rpc/pmap_clnt.h presence... yes
checking for rpc/pmap_clnt.h... yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking sys/signal.h usability... yes
checking sys/signal.h presence... yes
checking for sys/signal.h... yes
checking crypt.h usability... yes
checking crypt.h presence... yes
checking for crypt.h... yes
checking for stdint.h... (cached) yes
checking stdbool.h usability... yes
checking stdbool.h presence... yes
checking for stdbool.h... yes
checking sys/filio.h usability... no
checking sys/filio.h presence... no
checking for sys/filio.h... no
checking DNSServiceDiscovery/DNSServiceDiscovery.h usability... no
checking DNSServiceDiscovery/DNSServiceDiscovery.h presence... no
checking for DNSServiceDiscovery/DNSServiceDiscovery.h... no
checking for uint16_t... yes
checking for uint32_t... yes
checking for uint64_t... yes
checking for uid_t... yes
checking for gid_t... yes
checking for socklen_t... yes
checking for rlim_t... no
checking for struct addrinfo... yes
checking for struct in6_addr... yes
checking for struct sockaddr_in6... yes
checking for struct sockaddr_storage... yes
checking for main in -lcrypt... yes
checking whether to compile in loadavg... yes
checking for crypt in -lc... yes
checking for log10 in -lm... yes
checking whether to default to ipv6... ignored
checking whether to use libwrap... yes
checking for request_init in -lwrap... yes
checking for yp_get_default_domain in -lnsl... yes
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking for getpagesize... yes
checking for working mmap... yes
checking for isatty... yes
checking for memcpy... yes
checking for waitpid... yes
checking for sigvec... yes
checking for setsid... yes
checking for strftime... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating libs/src/misc/Makefile
config.status: creating libs/src/pset/Makefile
config.status: creating libs/src/sio/Makefile
config.status: creating libs/src/str/Makefile
config.status: creating libs/src/xlog/Makefile
config.status: creating libs/src/portable/Makefile
config.status: creating xinetd/Makefile
config.status: creating config.h
cd libs/src/portable ; make CC=gcc CFLAGS='-O3 -mcpu=i686 -funroll-loops
-pipe  -I../../include' install
cd libs/src/pset ; make CC=gcc CFLAGS='-O3 -mcpu=i686 -funroll-loops
-pipe  -I../../include' install
make[1]: Entering directory
`/var/tmp/portage/xinetd-2.3.11/work/xinetd-2.3.11/libs/src/portable'
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../../include   -c -o
difftime.o difftime.c
make[1]: Entering directory
`/var/tmp/portage/xinetd-2.3.11/work/xinetd-2.3.11/libs/src/pset'
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../../include   -c -o pset.o
pset.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../../include   -c -o
inet_aton.o inet_aton.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../../include   -c -o
strerror.o strerror.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../../include   -c -o
fake-getnameinfo.o fake-getnameinfo.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../../include   -c -o ops.o ops.c
ar r libpset.a pset.o ops.o
ranlib libpset.a
Installed libpset.a to ../../lib
Installed ./pset.h to ../../include
Installed ./pset.3 ./psi.3 to ../../man
make[1]: Leaving directory
`/var/tmp/portage/xinetd-2.3.11/work/xinetd-2.3.11/libs/src/pset'
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../../include   -c -o
inet_ntop.o inet_ntop.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../../include   -c -o cvt.o cvt.c
ar r libportable.a difftime.o inet_aton.o strerror.o fake-getnameinfo.o
inet_ntop.o cvt.o
ranlib libportable.a
Installed libportable.a to ../../lib
Installed ./libportable.h to ../../include
make[1]: Leaving directory
`/var/tmp/portage/xinetd-2.3.11/work/xinetd-2.3.11/libs/src/portable'
cd libs/src/sio ; make CC=gcc CFLAGS='-O3 -mcpu=i686 -funroll-loops
-pipe  -I../../include' install
make[1]: Entering directory
`/var/tmp/portage/xinetd-2.3.11/work/xinetd-2.3.11/libs/src/sio'
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../../include   -c -o
sprint.o sprint.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../../include   -c -o sio.o sio.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../../include   -c -o
siosup.o siosup.c
ar r libsio.a sprint.o sio.o siosup.o
ranlib libsio.a
Installed libsio.a to ../../lib
Installed ./sio.h to ../../include
Installed ./sio.3 ./Sprint.3 to ../../man
make[1]: Leaving directory
`/var/tmp/portage/xinetd-2.3.11/work/xinetd-2.3.11/libs/src/sio'
cd libs/src/str ; make CC=gcc CFLAGS='-O3 -mcpu=i686 -funroll-loops
-pipe  -I../../include' install
make[1]: Entering directory
`/var/tmp/portage/xinetd-2.3.11/work/xinetd-2.3.11/libs/src/str'
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../../include   -c -o
strutil.o strutil.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../../include   -c -o
strprint.o strprint.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../../include   -c -o
strparse.o strparse.c
ar r libstr.a strutil.o strprint.o strparse.o
ranlib libstr.a
Installed libstr.a to ../../lib
Installed ./str.h to ../../include
Installed ./strparse.3 ./strprint.3 ./strutil.3 to ../../man
make[1]: Leaving directory
`/var/tmp/portage/xinetd-2.3.11/work/xinetd-2.3.11/libs/src/str'
cd libs/src/misc ; make CC=gcc CFLAGS='-O3 -mcpu=i686 -funroll-loops
-pipe  -I../../include' install
cd libs/src/xlog ; make CC=gcc CFLAGS='-O3 -mcpu=i686 -funroll-loops
-pipe  -I../../include' install
make[1]: Entering directory
`/var/tmp/portage/xinetd-2.3.11/work/xinetd-2.3.11/libs/src/misc'
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../../include   -c -o misc.o
misc.c
make[1]: Entering directory
`/var/tmp/portage/xinetd-2.3.11/work/xinetd-2.3.11/libs/src/xlog'
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../../include   -c -o xlog.o
xlog.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../../include   -c -o m_env.o
m_env.c
ar r libmisc.a misc.o m_env.o
ranlib libmisc.a
Installed libmisc.a to ../../lib
Installed ./misc.h ./m_env.h to ../../include
Installed ./misc.3 ./m_env.3 to ../../man
make[1]: Leaving directory
`/var/tmp/portage/xinetd-2.3.11/work/xinetd-2.3.11/libs/src/misc'
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../../include   -c -o
filelog.o filelog.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../../include   -c -o slog.o
slog.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../../include   -c -o util.o
util.c
ar r libxlog.a xlog.o filelog.o slog.o util.o
ranlib libxlog.a
Installed libxlog.a to ../../lib
Installed ./xlog.h to ../../include
Installed ./xlog.3 to ../../man
make[1]: Leaving directory
`/var/tmp/portage/xinetd-2.3.11/work/xinetd-2.3.11/libs/src/xlog'
cd xinetd ; make CC=gcc CFLAGS='-O3 -mcpu=i686 -funroll-loops -pipe
-I../libs/include' LDFLAGS='-L../libs/lib'
make[1]: Entering directory
`/var/tmp/portage/xinetd-2.3.11/work/xinetd-2.3.11/xinetd'
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
addr.o addr.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o env.o
env.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
nvlists.o nvlists.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
parsesup.o parsesup.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
parsers.o parsers.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
time.o time.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
util.o util.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
redirect.o redirect.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
xgetloadavg.o xgetloadavg.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
options.o options.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
includedir.o includedir.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
xtimer.o xtimer.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
inet.o inet.c
gcc  -I../libs/include ./itox.c -o itox -L../libs/lib -lmisc -lsio -lstr
-lportable -lsio -lmisc -lxlog -lstr -lpset -lportable -lwrap -lnsl -lm
-lcrypt
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
parse.o parse.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
sensor.o sensor.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
builtins.o builtins.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
child.o child.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
conf.o conf.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
confparse.o confparse.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
connection.o connection.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
ident.o ident.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
init.o init.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
internals.o internals.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o log.o
log.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
logctl.o logctl.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
main.o main.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o msg.o
msg.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
reconfig.o reconfig.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
retry.o retry.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
sconf.o sconf.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
server.o server.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
service.o service.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
signals.o signals.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
special.o special.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
tcpint.o tcpint.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
udpint.o udpint.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
access.o access.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o int.o
int.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include   -c -o
intcommon.o intcommon.c
gcc -O3 -mcpu=i686 -funroll-loops -pipe  -I../libs/include  -o xinetd
access.o addr.o builtins.o child.o conf.o confparse.o connection.o env.o
ident.o init.o int.o intcommon.o internals.o log.o logctl.o main.o msg.o
nvlists.o parse.o parsesup.o parsers.o reconfig.o retry.o sconf.o
sensor.o server.o service.o signals.o special.o tcpint.o time.o udpint.o
util.o redirect.o xgetloadavg.o options.o includedir.o xtimer.o inet.o
-L../libs/lib -lsio -lmisc -lxlog -lstr -lpset -lportable -lwrap -lnsl
-lm -lcrypt  || rm -f xinetd
make[1]: Leaving directory
`/var/tmp/portage/xinetd-2.3.11/work/xinetd-2.3.11/xinetd'

> > > Install xinetd-2.3.11 into /var/tmp/portage/xinetd-2.3.11/image/ 
category sys-apps
man:
prepallstrip:
strip:
strip:
   usr/sbin/itox
   usr/sbin/xinetd
> > > Completed installing into /var/tmp/portage/xinetd-2.3.11/image/

> > > Merging sys-apps/xinetd-2.3.11 to /
--- /etc/
--- /etc/xinetd.d/
> > > /etc/xinetd.d/README.services
> > > /etc/xinetd.d/chargen-tcp
> > > /etc/xinetd.d/chargen-udp
> > > /etc/xinetd.d/daytime-tcp
> > > /etc/xinetd.d/daytime-udp
> > > /etc/xinetd.d/time-tcp
> > > /etc/xinetd.d/time-udp
> > > /etc/xinetd.d/echo-tcp
> > > /etc/xinetd.d/echo-udp
> > > /etc/xinetd.conf
--- /etc/conf.d/
> > > /etc/conf.d/xinetd
--- /etc/init.d/
> > > /etc/init.d/xinetd
--- /usr/
--- /usr/sbin/
> > > /usr/sbin/itox
> > > /usr/sbin/xconv.pl
> > > /usr/sbin/xinetd
--- /usr/share/
--- /usr/share/doc/
> > > /usr/share/doc/xinetd-2.3.11/
> > > /usr/share/doc/xinetd-2.3.11/CHANGELOG.gz
> > > /usr/share/doc/xinetd-2.3.11/README.gz
> > > /usr/share/doc/xinetd-2.3.11/TODO.gz
> > > /usr/share/doc/xinetd-2.3.11/INSTALL.gz
> > > /usr/share/doc/xinetd-2.3.11/COPYRIGHT.gz
> > > /usr/share/doc/xinetd-2.3.11/AUDIT.gz
> > > /usr/share/doc/xinetd-2.3.11/xinetd.conf.dist.sample.gz
> > > /usr/share/doc/xinetd-2.3.11/xinetd.conf.default.gz
--- /usr/share/man/
--- /usr/share/man/man5/
> > > /usr/share/man/man5/xinetd.conf.5.gz
--- /usr/share/man/man8/
> > > /usr/share/man/man8/itox.8.gz
> > > /usr/share/man/man8/xinetd.8.gz
> > > /usr/share/man/man8/xinetd.log.8.gz

 * This ebuild introduces the /etc/xinetd.d includedir with a default
 * /etc/xinetd.conf file. Check your config files if you're upgrading
from an older
 * ebuild version. You should browse /etc/xinetd.conf and the files in
/etc/xinetd.d.
 *
 * PLEASE NOTE: Everything is off by default with access restricted to
localhost.
 *
 * Check /etc/conf.d/xinetd for the startup options.

> > > Regenerating /etc/ld.so.cache...
> > > sys-apps/xinetd-2.3.11 merged.

 sys-apps/xinetd
    selected: none
   protected: 2.3.11
     omitted: none

> > > clean: No packages selected for removal.

> > > emerge (2 of 2) net-mail/hotwayd-0.5.3 to /
> > > Downloading 
http://gentoo.oregonstate.edu/distfiles/hotwayd-0.5.3.tar.bz2
--02:45:47--  http://gentoo.oregonstate.edu/distfiles/hotwayd-0.5.3.tar.bz2
           => `/usr/portage/distfiles/hotwayd-0.5.3.tar.bz2'
Resolving gentoo.oregonstate.edu... done.
Connecting to gentoo.oregonstate.edu[128.193.0.3]:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 119,626 [application/x-tar]

100%[====================================================>] 119,626
   4.09K/s    ETA 00:00

02:46:17 (4.09 KB/s) - `/usr/portage/distfiles/hotwayd-0.5.3.tar.bz2'
saved [119626/119626]

> > > md5 src_uri ;-) hotwayd-0.5.3.tar.bz2
> > > Unpacking source...
> > > Unpacking hotwayd-0.5.3.tar.bz2 to /var/tmp/portage/hotwayd-0.5.3/work
> > > Source unpacked.
configure: WARNING: If you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used.
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for i486-pc-linux-gnu-strip... no
checking for strip... strip
checking for gawk... (cached) gawk
checking for i486-pc-linux-gnu-gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for a BSD-compatible install... /bin/install -c
checking whether ln -s works... yes
checking for xml2-config... /usr/bin/xml2-config
checking libxml2 version... 2.5.8
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking syslog.h usability... yes
checking syslog.h presence... yes
checking for syslog.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking return type of signal handlers... void
checking for gethostname... yes
checking for strdup... yes
checking for strstr... yes
checking for strtoul... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
source='hotwayd.c' object='hotwayd.o' libtool=no \
depfile='.deps/hotwayd.Po' tmpdepfile='.deps/hotwayd.TPo' \
depmode=gcc3 /bin/sh ./depcomp \
gcc -DPACKAGE_NAME=\"hotwayd\" -DPACKAGE_TARNAME=\"hotwayd\"
-DPACKAGE_VERSION=\"0.5.3\" -DPACKAGE_STRING=\"hotwayd\ 0.5.3\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"hotwayd\" -DVERSION=\"0.5.3\"
-DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1
-DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1
-DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_FCNTL_H=1
-DHAVE_MALLOC_H=1 -DHAVE_SYSLOG_H=1 -DHAVE_UNISTD_H=1 -DRETSIGTYPE=void
-DHAVE_GETHOSTNAME=1 -DHAVE_STRDUP=1 -DHAVE_STRSTR=1 -DHAVE_STRTOUL=1
-I. -I. `xml2-config --cflags`    -O3 -mcpu=i686 -funroll-loops -pipe
-I/usr/include/libxml2 -c `test -f 'hotwayd.c' || echo './'`hotwayd.c
source='commands.c' object='commands.o' libtool=no \
depfile='.deps/commands.Po' tmpdepfile='.deps/commands.TPo' \
depmode=gcc3 /bin/sh ./depcomp \
gcc -DPACKAGE_NAME=\"hotwayd\" -DPACKAGE_TARNAME=\"hotwayd\"
-DPACKAGE_VERSION=\"0.5.3\" -DPACKAGE_STRING=\"hotwayd\ 0.5.3\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"hotwayd\" -DVERSION=\"0.5.3\"
-DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1
-DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1
-DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_FCNTL_H=1
-DHAVE_MALLOC_H=1 -DHAVE_SYSLOG_H=1 -DHAVE_UNISTD_H=1 -DRETSIGTYPE=void
-DHAVE_GETHOSTNAME=1 -DHAVE_STRDUP=1 -DHAVE_STRSTR=1 -DHAVE_STRTOUL=1
-I. -I. `xml2-config --cflags`    -O3 -mcpu=i686 -funroll-loops -pipe
-I/usr/include/libxml2 -c `test -f 'commands.c' || echo './'`commands.c
source='xmlstuff.c' object='xmlstuff.o' libtool=no \
depfile='.deps/xmlstuff.Po' tmpdepfile='.deps/xmlstuff.TPo' \
depmode=gcc3 /bin/sh ./depcomp \
gcc -DPACKAGE_NAME=\"hotwayd\" -DPACKAGE_TARNAME=\"hotwayd\"
-DPACKAGE_VERSION=\"0.5.3\" -DPACKAGE_STRING=\"hotwayd\ 0.5.3\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"hotwayd\" -DVERSION=\"0.5.3\"
-DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1
-DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1
-DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_FCNTL_H=1
-DHAVE_MALLOC_H=1 -DHAVE_SYSLOG_H=1 -DHAVE_UNISTD_H=1 -DRETSIGTYPE=void
-DHAVE_GETHOSTNAME=1 -DHAVE_STRDUP=1 -DHAVE_STRSTR=1 -DHAVE_STRTOUL=1
-I. -I. `xml2-config --cflags`    -O3 -mcpu=i686 -funroll-loops -pipe
-I/usr/include/libxml2 -c `test -f 'xmlstuff.c' || echo './'`xmlstuff.c
source='cache.c' object='cache.o' libtool=no \
depfile='.deps/cache.Po' tmpdepfile='.deps/cache.TPo' \
depmode=gcc3 /bin/sh ./depcomp \
gcc -DPACKAGE_NAME=\"hotwayd\" -DPACKAGE_TARNAME=\"hotwayd\"
-DPACKAGE_VERSION=\"0.5.3\" -DPACKAGE_STRING=\"hotwayd\ 0.5.3\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"hotwayd\" -DVERSION=\"0.5.3\"
-DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1
-DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1
-DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_FCNTL_H=1
-DHAVE_MALLOC_H=1 -DHAVE_SYSLOG_H=1 -DHAVE_UNISTD_H=1 -DRETSIGTYPE=void
-DHAVE_GETHOSTNAME=1 -DHAVE_STRDUP=1 -DHAVE_STRSTR=1 -DHAVE_STRTOUL=1
-I. -I. `xml2-config --cflags`    -O3 -mcpu=i686 -funroll-loops -pipe
-I/usr/include/libxml2 -c `test -f 'cache.c' || echo './'`cache.c
source='inet.c' object='inet.o' libtool=no \
depfile='.deps/inet.Po' tmpdepfile='.deps/inet.TPo' \
depmode=gcc3 /bin/sh ./depcomp \
gcc -DPACKAGE_NAME=\"hotwayd\" -DPACKAGE_TARNAME=\"hotwayd\"
-DPACKAGE_VERSION=\"0.5.3\" -DPACKAGE_STRING=\"hotwayd\ 0.5.3\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"hotwayd\" -DVERSION=\"0.5.3\"
-DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1
-DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1
-DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_FCNTL_H=1
-DHAVE_MALLOC_H=1 -DHAVE_SYSLOG_H=1 -DHAVE_UNISTD_H=1 -DRETSIGTYPE=void
-DHAVE_GETHOSTNAME=1 -DHAVE_STRDUP=1 -DHAVE_STRSTR=1 -DHAVE_STRTOUL=1
-I. -I. `xml2-config --cflags`    -O3 -mcpu=i686 -funroll-loops -pipe
-I/usr/include/libxml2 -c `test -f 'inet.c' || echo './'`inet.c
source='version.c' object='version.o' libtool=no \
depfile='.deps/version.Po' tmpdepfile='.deps/version.TPo' \
depmode=gcc3 /bin/sh ./depcomp \
gcc -DPACKAGE_NAME=\"hotwayd\" -DPACKAGE_TARNAME=\"hotwayd\"
-DPACKAGE_VERSION=\"0.5.3\" -DPACKAGE_STRING=\"hotwayd\ 0.5.3\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"hotwayd\" -DVERSION=\"0.5.3\"
-DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1
-DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1
-DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_FCNTL_H=1
-DHAVE_MALLOC_H=1 -DHAVE_SYSLOG_H=1 -DHAVE_UNISTD_H=1 -DRETSIGTYPE=void
-DHAVE_GETHOSTNAME=1 -DHAVE_STRDUP=1 -DHAVE_STRSTR=1 -DHAVE_STRTOUL=1
-I. -I. `xml2-config --cflags`    -O3 -mcpu=i686 -funroll-loops -pipe
-I/usr/include/libxml2 -c `test -f 'version.c' || echo './'`version.c
gcc  -O3 -mcpu=i686 -funroll-loops -pipe -I/usr/include/libxml2   -o
hotwayd  hotwayd.o commands.o xmlstuff.o cache.o inet.o version.o
libghttp-1.0.9-mod/ghttp.c libghttp-1.0.9-mod/http_date.c
libghttp-1.0.9-mod/http_hdrs.c libghttp-1.0.9-mod/http_req.c
libghttp-1.0.9-mod/http_resp.c libghttp-1.0.9-mod/http_trans.c
libghttp-1.0.9-mod/http_uri.c libghttp-1.0.9-mod/http_base64.c
libghttp-1.0.9-mod/http_digest.c libghttp-1.0.9-mod/http_lazy.c
libghttp-1.0.9-mod/md5c.c strlcpy.c strlcat.c -L/usr/lib -lxml2 -lz
-lpthread -lm

> > > Install hotwayd-0.5.3 into /var/tmp/portage/hotwayd-0.5.3/image/ 
category net-mail
man:
prepallstrip:
strip:
strip:
   usr/sbin/hotwayd
> > > Completed installing into /var/tmp/portage/hotwayd-0.5.3/image/

> > > Merging net-mail/hotwayd-0.5.3 to /
--- /etc/
--- /etc/xinetd.d/
> > > /etc/xinetd.d/hotwayd
--- /usr/
--- /usr/sbin/
> > > /usr/sbin/hotwayd
--- /usr/share/
--- /usr/share/doc/
> > > /usr/share/doc/hotwayd-0.5.3/
> > > /usr/share/doc/hotwayd-0.5.3/README.gz
> > > /usr/share/doc/hotwayd-0.5.3/NEWS.gz
> > > /usr/share/doc/hotwayd-0.5.3/AUTHORS.gz

 * ----------------------------------------------------------------
 *  By default daemons that use xinetd are not started
 *      automatically in gentoo
 *  To activate do the following steps:
 *  - Edit the file /etc/xinetd.d/hotwayd and change disable
 *    from yes to no
 *  - Add the following line to /etc/services:
 *    hotwayd         110/tcp
 *  - Note: if you already have a daemon serving port 110 (the
 *    default pop3 port); then change the port number to something
 *    else; also change the port number in hotwayd
 *  - If you already had xinetd up and running, restart with
 *    # /etc/init.d/xinetd restart
 *    or
 *    If the emerge also pulled in the xinetd package for you, do
 *    # rc-update add xinetd default
 *    # /etc/init.d/xinetd start
 * -----------------------------------------------------------------
> > > Regenerating /etc/ld.so.cache...
> > > net-mail/hotwayd-0.5.3 merged.

 net-mail/hotwayd
    selected: none
   protected: 0.5.3
     omitted: none

> > > clean: No packages selected for removal.

> > > Regenerating /etc/ld.so.cache...
> > > Auto-cleaning packages ...

> > > No outdated packages were found on your system.


 * GNU info directory index is up-to-date.

bash-2.05b#