From: address@hidden
Subject: Warning error during 'configure' of Amanda 2.4.4p1 on HP-UX 10.20
TO: address@hidden
Date: Mon, 1 Dec 2003 15:28:37 -0600
X-Sent: 19 hours, 25 minutes, 24 seconds ago

Hi --

Working on a system running HP-UX 10.20.  This error popped up during my 
'configure' run of Amanda 2.4.4p1:

  configure: WARNING: netinet/ip.h: present but cannot be compiled
  configure: WARNING: netinet/ip.h: check for missing prerequisite 
headers?
  configure: WARNING: netinet/ip.h: proceeding with the preprocessor's 
result
  configure: WARNING:     ## ------------------------------------ ##
  configure: WARNING:     ## Report this to address@hidden ##
  configure: WARNING:     ## ------------------------------------ ##

I checked the 'configure' output from my build of Amanda 2.4.4 a few 
weeks ago, and this error did not occur there.  I have not installed any 
new GNU pkgs between then and now.

Here's the --version of 'autoconf':

  # autoconf --version       <
  autoconf (GNU Autoconf) 2.53
  Written by David J. MacKenzie and Akim Demaille.

  Copyright 2002 Free Software Foundation, Inc.
  This is free software; see the source for copying conditions.  There 
is NO
  warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR 
PURPOSE.

I've attached the full 'configure' output (configure.txt), as well as 
'config.log'.  If you need anything else, please let me know.

See ya...
-- 
Mark Conty
address@hidden
[2. application/octet-stream; config.log]...

+ export CC=cc MAKE=/opt/gnu/bin/gmake
+ sh configure --disable-libtool --disable-gcc --prefix=/opt/amanda --with-amandahosts --with-assertions --with-buffered-dump=yes --with-config=daily --with-configdir=/opt/amanda/etc --with-debugging --with-gnu-ld=yes --with-gnutar-listdir=/var/opt/amanda/gnutar-lists --with-gnutar=/opt/gnu/bin/tar --with-group=amanda --with-includes=/opt/gnu/include /opt/gnu/include/readline --with-index-server=s2sme.grain.cargill.com --with-libraries=/opt/gnu/lib --with-pid-debug-files --with-rundump --with-tape-server=s2sme.grain.cargill.com --with-user=amanda
checking build system type... hppa2.0-hp-hpux10.20
checking host system type... hppa2.0-hp-hpux10.20
checking target system type... hppa2.0-hp-hpux10.20
checking for a BSD-compatible install... config/install-sh -c
checking whether build environment is sane... yes
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether /opt/gnu/bin/gmake sets $(MAKE)... yes
checking for non-rewinding tape device... /dev/null
checking for raw ftape device... /dev/null
checking for Kerberos and Amanda kerberos4 bits... no
checking for gcc... cc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... no
checking whether cc accepts -g... yes
checking for cc option to accept ANSI C... -Ae
checking for style of include used by /opt/gnu/bin/gmake... GNU
checking dependency style of cc -Ae... hp
checking for ar... /usr/bin/ar
checking for gawk... (cached) awk
checking for awk command line variable assignment... yes with -v
checking for bison... no
checking for byacc... no
checking for cat... /sbin/cat
checking for compress... /usr/bin/compress
checking for dd... /usr/bin/dd
checking for egrep... /usr/bin/egrep
checking for getconf... /bin/getconf
checking for gnuplot... no
configure: WARNING: *** You do not have gnuplot.  Amplot will not be installed.
checking for grep... /usr/bin/grep
checking for gtar... /opt/gnu/bin/tar
checking for smbclient... no
checking for gzip... /usr/contrib/bin/gzip
checking for Mail... no
checking for mailx... /usr/bin/mailx
checking for mt... /usr/bin/mt
checking for chio... no
checking for chs... no
checking for mtx... no
checking for mcutil... no
checking for lpr... /usr/bin/lpr
checking which flag to use to select a printer... -P
checking for pcat... /usr/bin/pcat
checking for perl5... no
checking for perl... /usr/bin/perl
checking for ufsdump... no
checking for dump... /usr/sbin/dump
checking for ufsrestore... no
checking for restore... /sbin/restore
checking whether /usr/sbin/dump supports -E or -S for estimates... no
checking for xfsdump... no
checking for xfsrestore... no
checking for vxdump... /usr/sbin/vxdump
checking for vxrestore... /usr/sbin/vxrestore
checking for vdump... no
checking for vrestore... no
checking for large file compilation CFLAGS... 
checking for large file compilation LDFLAGS... 
checking for large file compilation LIBS... 
checking for GNU ld... /usr/ccs/bin/ld
checking if the linker (/usr/ccs/bin/ld) is GNU ld... no
checking for /usr/ccs/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -p
checking for a sed that does not truncate output... /usr/bin/sed
checking whether ln -s works... yes
checking how to recognise dependent libraries... file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library
checking command to parse /usr/bin/nm -p output... ok
checking how to run the C preprocessor... cc -Ae -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... no
checking for unistd.h... yes
checking dlfcn.h usability... no
checking dlfcn.h presence... no
checking for dlfcn.h... no
checking for ranlib... ranlib
checking for strip... strip
checking for objdir... .libs
checking for cc option to produce PIC... +Z
checking if cc PIC flag +Z works... yes
checking if cc static flag -Wl,-a -Wl,archive works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.lo... yes
checking whether the linker (/usr/ccs/bin/ld) supports shared libraries... yes
checking how to hardcode library paths into programs... relink
checking whether stripping libraries is possible... no
checking dynamic linker characteristics... hpux10.20 dld.sl
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
creating libtool
checking for an ANSI C-conforming const... yes
checking for working volatile... yes
checking for working unsigned long constants... yes
checking for off_t... yes
checking for pid_t... yes
checking for size_t... yes
checking for ssize_t... yes
checking for uid_t in sys/types.h... yes
checking return type of signal handlers... void
checking whether struct tm is in sys/time.h or time.h... time.h
checking for flex... no
checking for lex... lex
checking for yywrap in -lfl... yes
checking lex output file root... lex.yy
checking whether yytext is a pointer... no
checking for socklen_t... no
checking for ANSI C header files... (cached) yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking sys/wait.h usability... yes
checking sys/wait.h presence... yes
checking for sys/wait.h... yes
checking wait.h usability... no
checking wait.h presence... no
checking for wait.h... no
checking whether wait uses union wait... no
checking whether time.h and sys/time.h may both be included... yes
checking arpa/inet.h usability... yes
checking arpa/inet.h presence... yes
checking for arpa/inet.h... yes
checking camlib.h usability... no
checking camlib.h presence... no
checking for camlib.h... no
checking cam/cam.h usability... no
checking cam/cam.h presence... no
checking for cam/cam.h... no
checking cam/scsi/scsi_message.h usability... no
checking cam/scsi/scsi_message.h presence... no
checking for cam/scsi/scsi_message.h... no
checking chio.h usability... no
checking chio.h presence... no
checking for chio.h... no
checking db.h usability... yes
checking db.h presence... yes
checking for db.h... yes
checking dbm.h usability... yes
checking dbm.h presence... yes
checking for dbm.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking fstab.h usability... yes
checking fstab.h presence... yes
checking for fstab.h... yes
checking grp.h usability... yes
checking grp.h presence... yes
checking for grp.h... yes
checking history.h usability... yes
checking history.h presence... yes
checking for history.h... yes
checking libc.h usability... no
checking libc.h presence... no
checking for libc.h... no
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking linux/zftape.h usability... no
checking linux/zftape.h presence... no
checking for linux/zftape.h... no
checking mntent.h usability... yes
checking mntent.h presence... yes
checking for mntent.h... yes
checking mnttab.h usability... no
checking mnttab.h presence... no
checking for mnttab.h... no
checking ndbm.h usability... yes
checking ndbm.h presence... yes
checking for ndbm.h... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking netinet/in_systm.h usability... yes
checking netinet/in_systm.h presence... yes
checking for netinet/in_systm.h... yes
checking netinet/ip.h usability... no
checking netinet/ip.h presence... yes
configure: WARNING: netinet/ip.h: present but cannot be compiled
configure: WARNING: netinet/ip.h: check for missing prerequisite headers?
configure: WARNING: netinet/ip.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for netinet/ip.h... yes
checking readline.h usability... yes
checking readline.h presence... yes
checking for readline.h... yes
checking readline/history.h usability... yes
checking readline/history.h presence... yes
checking for readline/history.h... yes
checking readline/readline.h usability... yes
checking readline/readline.h presence... yes
checking for readline/readline.h... yes
checking scsi/sg.h usability... no
checking scsi/sg.h presence... no
checking for scsi/sg.h... no
checking scsi/scsi_ioctl.h usability... no
checking scsi/scsi_ioctl.h presence... no
checking for scsi/scsi_ioctl.h... no
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for strings.h... (cached) yes
checking sys/chio.h usability... no
checking sys/chio.h presence... no
checking for sys/chio.h... no
checking sys/dsreq.h usability... no
checking sys/dsreq.h presence... no
checking for sys/dsreq.h... no
checking sys/fcntl.h usability... yes
checking sys/fcntl.h presence... yes
checking for sys/fcntl.h... yes
checking sys/file.h usability... yes
checking sys/file.h presence... yes
checking for sys/file.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/ipc.h usability... yes
checking sys/ipc.h presence... yes
checking for sys/ipc.h... yes
checking sys/mman.h usability... yes
checking sys/mman.h presence... yes
checking for sys/mman.h... yes
checking sys/mntent.h usability... no
checking sys/mntent.h presence... no
checking for sys/mntent.h... no
checking sys/mount.h usability... yes
checking sys/mount.h presence... yes
checking for sys/mount.h... yes
checking sys/mtio.h usability... yes
checking sys/mtio.h presence... yes
checking for sys/mtio.h... yes
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking sys/scarray.h usability... no
checking sys/scarray.h presence... no
checking for sys/scarray.h... no
checking sys/scsiio.h usability... no
checking sys/scsiio.h presence... no
checking for sys/scsiio.h... no
checking sys/scsi.h usability... yes
checking sys/scsi.h presence... yes
checking for sys/scsi.h... yes
checking sys/scsi/impl/uscsi.h usability... no
checking sys/scsi/impl/uscsi.h presence... no
checking for sys/scsi/impl/uscsi.h... no
checking sys/scsi/scsi/ioctl.h usability... no
checking sys/scsi/scsi/ioctl.h presence... no
checking for sys/scsi/scsi/ioctl.h... no
checking sys/select.h usability... no
checking sys/select.h presence... no
checking for sys/select.h... no
checking sys/shm.h usability... yes
checking sys/shm.h presence... yes
checking for sys/shm.h... yes
checking for sys/stat.h... (cached) yes
checking sys/statfs.h usability... no
checking sys/statfs.h presence... no
checking for sys/statfs.h... no
checking sys/statvfs.h usability... yes
checking sys/statvfs.h presence... yes
checking for sys/statvfs.h... yes
checking sys/tape.h usability... no
checking sys/tape.h presence... no
checking for sys/tape.h... no
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking for sys/types.h... (cached) yes
checking sys/vfs.h usability... yes
checking sys/vfs.h presence... yes
checking for sys/vfs.h... yes
checking sys/vfstab.h usability... no
checking sys/vfstab.h presence... no
checking for sys/vfstab.h... no
checking syslog.h usability... yes
checking syslog.h presence... yes
checking for syslog.h... yes
checking for unistd.h... (cached) yes
checking vtblc.h usability... no
checking vtblc.h presence... no
checking for vtblc.h... no
checking whether byte ordering is bigendian... yes
checking for HP/UX-like scsi changer support... yes
checking for HP-UX like scsi support... yes
checking for main in -lcur_colr... yes
checking for main in -lintl... yes
checking for main in -lnsl... no
checking for main in -lsocket... no
checking for main in -lsun... no
checking for tgetent in -ltermcap... yes
checking for readline in -lreadline... yes
checking for modf in -lm... yes
checking for mt_flags mtget structure element... not found
checking for mt_fileno mtget structure element... found
checking for mt_blkno mtget structure element... found
checking for mt_dsreg mtget structure element... not found
checking for mt_erreg mtget structure element... found
checking for dbm_open in -lc... yes
checking whether _POSIX2_RE_DUP_MAX is defined... yes
checking whether CHAR_MIN is defined... yes
checking whether CHAR_MAX is defined... yes
checking whether CHAR_BIT is defined... yes
checking for accept... yes
checking for accept declaration in sys/types.h sys/socket.h... yes
checking for working alloca.h... yes
checking for alloca... yes
checking for atexit... yes
checking for atof... yes
checking for atof declaration in stdlib.h... yes
checking for basename... yes
checking for bind... yes
checking for bind declaration in sys/types.h sys/socket.h... yes
checking for bcopy... yes
checking for bcopy declaration in string.h strings.h stdlib.h... yes
checking for bzero... yes
checking for bzero declaration in string.h strings.h stdlib.h... yes
checking whether closedir returns void... no
checking for closelog... yes
checking for closelog declaration in syslog.h... yes
checking for connect... yes
checking for connect declaration in sys/types.h sys/socket.h... yes
checking for dbm_open... yes
checking for dbm_open declaration in ... no
checking for endmntent... yes
checking for fclose... yes
checking for fclose declaration in stdio.h... yes
checking for fflush... yes
checking for fflush declaration in stdio.h... yes
checking for flock... no
checking for fprintf... yes
checking for fprintf declaration in stdio.h... yes
checking for fputc... yes
checking for fputc declaration in stdio.h... yes
checking for fputs... yes
checking for fputs declaration in stdio.h... yes
checking for fread... yes
checking for fread declaration in stdio.h stdlib.h... yes
checking for fseek... yes
checking for fseek declaration in stdio.h... yes
checking for fwrite... yes
checking for fwrite declaration in stdio.h stdlib.h... yes
checking for getcwd... yes
checking for getfsent... yes
checking for gethostname... yes
checking for gethostname declaration in unistd.h... yes
checking for getmntent in -lsun... no
checking for getmntent in -lseq... no
checking for getmntent in -lgen... no
checking for getmntent... yes
checking for getopt... yes
checking for getopt declaration in stdlib.h unistd.h libc.h... yes
checking for getpeername... yes
checking for getpeername declaration in sys/types.h sys/socket.h... yes
checking for getpgrp... yes
checking whether getpgrp requires zero arguments... yes
checking for getsockname... yes
checking for getsockname declaration in sys/types.h sys/socket.h... yes
checking for getsockopt... yes
checking for getsockopt declaration in sys/types.h sys/socket.h... yes
checking for gettimeofday... no
checking for gettimeofday number of arguments... 2
checking for getvfsent... no
checking for initgroups... yes
checking for isascii... yes
checking for initgroups... (cached) yes
checking for initgroups declaration in grp.h sys/types.h unistd.h libc.h... yes
checking for ioctl... yes
checking for ioctl declaration in sys/ioctl.h unistd.h libc.h... yes
checking for listen... yes
checking for listen declaration in sys/types.h sys/socket.h... yes
checking for lstat... yes
checking for lstat declaration in sys/types.h sys/stat.h... yes
checking for malloc... yes
checking for malloc declaration in stdlib.h... yes
checking for memmove... yes
checking for memmove... (cached) yes
checking for memmove declaration in string.h strings.h... yes
checking for memset... yes
checking for memset declaration in string.h strings.h... yes
checking for mkdir... yes
checking for mktemp... yes
checking for mktemp declaration in stdlib.h... yes
checking for mktime... no
checking for mktime... (cached) no
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking for getpagesize... yes
checking for working mmap... no
checking for on_exit... no
checking for openlog... yes
checking for openlog declaration in syslog.h... yes
checking for pclose... yes
checking for pclose declaration in stdio.h... yes
checking for perror... yes
checking for perror declaration in stdio.h... yes
checking for printf... yes
checking for printf declaration in stdio.h... yes
checking for putenv... yes
checking for puts... yes
checking for puts declaration in stdio.h... yes
checking for realloc... yes
checking for realloc declaration in stdlib.h... yes
checking for recvfrom... yes
checking for recvfrom declaration in sys/types.h sys/socket.h... yes
checking for remove... yes
checking for remove declaration in stdio.h... yes
checking for rename... yes
checking for rename declaration in stdio.h... yes
checking for rewind... yes
checking for rewind declaration in stdio.h... yes
checking for rmdir... yes
checking for ruserok... yes
checking for ruserok declaration in netdb.h sys/socket.h libc.h unistd.h... yes
checking for select... no
checking for select() argument type... fd_set
checking for sendto... yes
checking for sendto declaration in sys/types.h sys/socket.h... yes
checking for setegid... no
checking for seteuid... no
checking for setmntent... yes
checking for setresgid... yes
checking for setresgid declaration in unistd.h... yes
checking for setresuid... yes
checking for setresuid declaration in unistd.h... yes
checking for setpgid... yes
checking for setpgid... (cached) yes
checking for setpgid declaration in sys/types.h unistd.h... yes
checking for setpgrp... yes
checking whether setpgrp takes no argument... yes
checking for setpgrp... (cached) yes
checking for setpgrp declaration in sys/types.h unistd.h libc.h... yes
checking for setsockopt... yes
checking for setsockopt declaration in sys/types.h sys/socket.h... yes
checking for shmget... yes
checking for shmdt() argument type... void
checking for shmat... yes
checking for shmat declaration in sys/types.h sys/ipc.h sys/shm.h... yes
checking for shmctl... yes
checking for shmctl declaration in sys/types.h sys/ipc.h sys/shm.h... yes
checking for shmdt... yes
checking for shmdt declaration in sys/types.h sys/ipc.h sys/shm.h... yes
checking for shmget... (cached) yes
checking for shmget declaration in sys/types.h sys/ipc.h sys/shm.h... yes
checking for snprintf... yes
checking for snprintf declaration in stdio.h... no
checking for vsnprintf... yes
checking for vsnprintf declaration in stdio.h... no
checking for sigaction... yes
checking for sigemptyset... yes
checking for sigvec... no
checking for socket... yes
checking for socket declaration in sys/types.h sys/socket.h... yes
checking for socketpair... yes
checking for socketpair declaration in sys/types.h sys/socket.h... yes
checking for sscanf... yes
checking for sscanf declaration in stdio.h... yes
checking for statfs... yes
checking for statvfs... yes
checking for strerror... yes
checking for strerror... (cached) yes
checking for strerror declaration in string.h strings.h... yes
checking for strftime... no
checking for strftime in -lintl... yes
checking for strftime... (cached) no
checking for strftime... (cached) no
checking for strncasecmp... yes
checking for strncasecmp... (cached) yes
checking for strncasecmp declaration in string.h strings.h... yes
checking for strstr... yes
checking for syslog... yes
checking for syslog declaration in syslog.h... yes
checking for system... yes
checking for system declaration in stdlib.h... yes
checking for time... no
checking for tolower... yes
checking for tolower declaration in ctype.h... yes
checking for toupper... yes
checking for toupper declaration in ctype.h... yes
checking for ungetc... yes
checking for ungetc declaration in stdio.h... yes
checking for vprintf... yes
checking for _doprnt... yes
checking for vfprintf... yes
checking for vfprintf declaration in stdio.h stdlib.h... yes
checking for vprintf... (cached) yes
checking for vprintf declaration in stdio.h stdlib.h... yes
checking for vsprintf... yes
checking for vsprintf declaration in stdio.h stdlib.h... yes
checking for wait4... no
checking for waitpid... yes
checking for strcasecmp... yes
checking for strcasecmp... (cached) yes
checking for strcasecmp declaration in string.h strings.h... yes
checking disk device prefixes... /dev/dsk/ - /dev/rdsk/
configure: WARNING: "*** Run amhpfixdevs on HP-UX systems using /dev/vg??."
checking whether posix fcntl locking works... no
checking whether flock locking works... no
checking whether lockf locking works... no
checking whether lnlock locking works... no
configure: WARNING: *** No working file locking capability found!
configure: WARNING: *** Be VERY VERY careful.
configure: creating ./config.status
config.status: creating amplot/amcat.awk
config.status: creating amplot/amplot.sh
config.status: creating amplot/Makefile
config.status: creating changer-src/chg-manual.sh
config.status: creating changer-src/chg-multi.sh
config.status: creating changer-src/chg-mtx.sh
config.status: creating changer-src/chg-chs.sh
config.status: creating changer-src/chg-rth.pl
config.status: creating changer-src/chg-chio.pl
config.status: creating changer-src/chg-zd-mtx.sh
config.status: creating changer-src/Makefile
config.status: creating changer-src/chg-juke.sh
config.status: creating changer-src/chg-rait.sh
config.status: creating changer-src/chg-null.sh
config.status: creating changer-src/chg-mcutil.sh
config.status: creating client-src/patch-system.sh
config.status: creating client-src/Makefile
config.status: creating common-src/versuff.c
config.status: creating common-src/Makefile
config.status: creating example/amanda.conf
config.status: creating example/Makefile
config.status: creating example/amanda.conf.chg-scsi
config.status: creating example/chg-scsi-linux.conf
config.status: creating example/chg-scsi-solaris.conf
config.status: creating example/chg-scsi-hpux.conf
config.status: creating example/chg-mcutil.conf
config.status: creating man/amadmin.8
config.status: creating man/amanda.8
config.status: creating man/amcheck.8
config.status: creating man/amcheckdb.8
config.status: creating man/amcleanup.8
config.status: creating man/amdump.8
config.status: creating man/amflush.8
config.status: creating man/amlabel.8
config.status: creating man/amoverview.8
config.status: creating man/amrecover.8
config.status: creating man/amrmtape.8
config.status: creating man/amtoc.8
config.status: creating man/amverify.8
config.status: creating man/Makefile
config.status: creating man/amstatus.8
config.status: creating man/amreport.8
config.status: creating man/amgetconf.8
config.status: creating man/amverifyrun.8
config.status: creating man/amtapetype.8
config.status: creating docs/Makefile
config.status: creating recover-src/Makefile
config.status: creating restore-src/Makefile
config.status: creating server-src/amcheckdb.sh
config.status: creating server-src/amcleanup.sh
config.status: creating server-src/amdump.sh
config.status: creating server-src/amfreetapes.sh
config.status: creating server-src/amoverview.pl
config.status: creating server-src/amrmtape.sh
config.status: creating server-src/amtoc.pl
config.status: creating server-src/amverify.sh
config.status: creating server-src/Makefile
config.status: creating server-src/amstatus.pl
config.status: creating server-src/amverifyrun.sh
config.status: creating tape-src/Makefile
config.status: creating config/Makefile
config.status: creating Makefile
config.status: creating config/config.h
config.status: executing depfiles commands