Report this to address@hidden

[Vaclav Dvorsky]

time emerge --update world

[...]

>>> emerge (48 of 54) media-libs/xine-lib-1_rc4-r1 to /
>>> Downloading 
http://ftp.sh.cvut.cz/MIRRORS/gentoo/gentoo/distfiles/xine-lib-1-rc4a.tar.gz
--20:07:26-- 
http://ftp.sh.cvut.cz/MIRRORS/gentoo/gentoo/distfiles/xine-lib-1-rc4a.tar.gz
           => `/usr/portage/distfiles/xine-lib-1-rc4a.tar.gz'
Navazuje se spojení s 10.79.7.4:3128... connected.
Proxy požadavek odeslán, program čeká na odpověď ... 200 OK
Délka: 6,939,989 [application/x-tar]

100%[======================================================================================================================================>] 
6,939,989     22.19K/s    ETA 00:00

20:13:02 (20.17 KB/s) - `/usr/portage/distfiles/xine-lib-1-rc4a.tar.gz' 
uloženo [6939989/6939989]

>>> md5 src_uri ;-) xine-lib-1-rc4a.tar.gz
>>> Unpacking source...
>>> Unpacking xine-lib-1-rc4a.tar.gz to 
/var/tmp/portage/xine-lib-1_rc4-r1/work
 * Applying protect-CFLAGS.patch-1_rc4... 

                              [ ok ]
 * Applying xine-lib-2.6.patch... 

                              [ ok ]
 * Applying xine-lib-gcc34.patch... 

                              [ ok ]
 * Patching ${S}/ltmain.sh...
 *   Applying portage-1.4.1.patch...
 *   Applying max_cmd_len-1.5.0.patch...
>>> Source unpacked.
x86
avi
x86
configure: WARNING: If you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used.
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for i686-pc-linux-gnu-strip... no
checking for strip... strip
checking for style of include used by make... GNU
checking for i686-pc-linux-gnu-gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... no
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking dependency style of gcc... gcc3
checking for strerror in -lcposix... no
checking for i686-pc-linux-gnu-gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) no
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ANSI C... (cached) none needed
checking dependency style of gcc... (cached) gcc3
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for ANSI C header files... no
checking whether make sets $(MAKE)... (cached) yes
checking for a BSD-compatible install... /bin/install -c
checking whether ln -s works... yes
checking for gawk... (cached) gawk
checking for inline... no
checking for a sed that does not truncate output... /bin/sed
checking for non-GNU ld... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... nm
checking how to recognise dependent libraries... pass_all
checking for sys/types.h... no
checking for sys/stat.h... no
checking for stdlib.h... no
checking for string.h... no
checking for memory.h... no
checking for strings.h... no
checking for inttypes.h... no
checking for stdint.h... no
checking for unistd.h... no
checking dlfcn.h usability... no
checking dlfcn.h presence... yes
configure: WARNING: dlfcn.h: present but cannot be compiled
configure: WARNING: dlfcn.h: check for missing prerequisite headers?
configure: WARNING: dlfcn.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for dlfcn.h... yes
checking for i686-pc-linux-gnu-g++... g++
checking whether we are using the GNU C++ compiler... no
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for i686-pc-linux-gnu-g77... no
checking for i686-pc-linux-gnu-f77... no
checking for i686-pc-linux-gnu-xlf... no
checking for i686-pc-linux-gnu-frt... no
checking for i686-pc-linux-gnu-pgf77... no
checking for i686-pc-linux-gnu-fl32... no
checking for i686-pc-linux-gnu-af77... no
checking for i686-pc-linux-gnu-fort77... no
checking for i686-pc-linux-gnu-f90... no
checking for i686-pc-linux-gnu-xlf90... no
checking for i686-pc-linux-gnu-pgf90... no
checking for i686-pc-linux-gnu-epcf90... no
checking for i686-pc-linux-gnu-f95... no
checking for i686-pc-linux-gnu-fort... no
checking for i686-pc-linux-gnu-xlf95... no
checking for i686-pc-linux-gnu-lf95... no
checking for i686-pc-linux-gnu-g95... no
checking for g77... no
checking for f77... no
checking for xlf... no
checking for frt... no
checking for pgf77... no
checking for fl32... no
checking for af77... no
checking for fort77... no
checking for f90... no
checking for xlf90... no
checking for pgf90... no
checking for epcf90... no
checking for f95... no
checking for fort... no
checking for xlf95... no
checking for lf95... no
checking for g95... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether  accepts -g... no
checking the maximum length of command line arguments... 32768
checking command to parse nm output from gcc object... failed
checking for objdir... .libs
checking for i686-pc-linux-gnu-ar... no
checking for ar... ar
checking for i686-pc-linux-gnu-ranlib... no
checking for ranlib... ranlib
checking for i686-pc-linux-gnu-strip... strip
checking if gcc static flag  works... yes
checking for gcc option to produce PIC...
checking if gcc supports -c -o file.o... no
checking if we can lock with hard links... yes
checking whether the gcc linker (/usr/bin/ld) supports shared 
libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... no
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
configure: creating libtool
appending configuration tag "CXX" to libtool
checking whether the g++ linker (/usr/bin/ld) supports shared 
libraries... yes
libtool.m4: error: problem compiling CXX test program
checking for g++ option to produce PIC...
checking if g++ supports -c -o file.o... no
checking if we can lock with hard links... yes
checking whether the g++ linker (/usr/bin/ld) supports shared 
libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking for shl_load... (cached) no
checking for shl_load in -ldld... (cached) no
checking for dlopen... (cached) no
checking for dlopen in -ldl... (cached) yes
checking whether a program can dlopen itself... (cached) no
appending configuration tag "F77" to libtool
checking for i686-pc-linux-gnu-ranlib... ranlib
checking for an ANSI C-conforming const... no
checking for off_t... no
checking for size_t... no
checking for working alloca.h... yes
checking for alloca... yes
checking for stdlib.h... (cached) no
checking for unistd.h... (cached) no
checking for getpagesize... yes
checking for working mmap... yes
checking whether we are using the GNU C Library 2.1 or newer... yes
checking argz.h usability... no
checking argz.h presence... yes
configure: WARNING: argz.h: present but cannot be compiled
configure: WARNING: argz.h: check for missing prerequisite headers?
configure: WARNING: argz.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for argz.h... yes
checking limits.h usability... no
checking limits.h presence... yes
configure: WARNING: limits.h: present but cannot be compiled
configure: WARNING: limits.h: check for missing prerequisite headers?
configure: WARNING: limits.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for limits.h... yes
checking locale.h usability... no
checking locale.h presence... yes
configure: WARNING: locale.h: present but cannot be compiled
configure: WARNING: locale.h: check for missing prerequisite headers?
configure: WARNING: locale.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for locale.h... yes
checking nl_types.h usability... no
checking nl_types.h presence... yes
configure: WARNING: nl_types.h: present but cannot be compiled
configure: WARNING: nl_types.h: check for missing prerequisite headers?
configure: WARNING: nl_types.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for nl_types.h... yes
checking malloc.h usability... no
checking malloc.h presence... yes
configure: WARNING: malloc.h: present but cannot be compiled
configure: WARNING: malloc.h: check for missing prerequisite headers?
configure: WARNING: malloc.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for malloc.h... yes
checking stddef.h usability... no
checking stddef.h presence... yes
configure: WARNING: stddef.h: present but cannot be compiled
configure: WARNING: stddef.h: check for missing prerequisite headers?
configure: WARNING: stddef.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for stddef.h... yes
checking for stdlib.h... (cached) no
checking for string.h... (cached) no
checking for unistd.h... (cached) no
checking sys/param.h usability... no
checking sys/param.h presence... yes
configure: WARNING: sys/param.h: present but cannot be compiled
configure: WARNING: sys/param.h: check for missing prerequisite headers?
configure: WARNING: sys/param.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for sys/param.h... yes
checking for feof_unlocked... yes
checking for fgets_unlocked... yes
checking for getcwd... yes
checking for getegid... yes
checking for geteuid... yes
checking for getgid... yes
checking for getuid... yes
checking for mempcpy... yes
checking for munmap... yes
checking for putenv... yes
checking for setenv... yes
checking for setlocale... yes
checking for stpcpy... yes
checking for strchr... yes
checking for strcasecmp... yes
checking for strdup... yes
checking for strtoul... yes
checking for tsearch... yes
checking for __argz_count... yes
checking for __argz_stringify... yes
checking for __argz_next... yes
checking for iconv... yes
checking for iconv declaration...
         extern size_t iconv (iconv_t cd, const char * *inbuf, size_t 
*inbytesleft, char * *outbuf, size_t *outbytesleft);
checking for nl_langinfo and CODESET... yes
checking for LC_MESSAGES... yes
checking whether NLS is requested... yes
checking whether included gettext is requested... no
checking libintl.h usability... no
checking libintl.h presence... yes
configure: WARNING: libintl.h: present but cannot be compiled
configure: WARNING: libintl.h: check for missing prerequisite headers?
configure: WARNING: libintl.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for libintl.h... yes
checking for GNU gettext in libc... yes
checking for dcgettext... yes
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for bison... bison
checking version of bison... 1.875, ok
checking for catalogs to be installed...  fr pt_BR de sk es pl cs it
checking for plural forms in GNU msgfmt... yes
checking whether byte ordering is bigendian... no
checking for an ANSI C-conforming const... (cached) no
checking for inline... (cached) no
checking for off_t... (cached) no
checking for size_t... (cached) no
checking for long... no
checking size of long... 0
checking for inttypes.h... (cached) no
checking that size of char is 1... configure: error: can not build a 
default inttypes.h

!!! ERROR: media-libs/xine-lib-1_rc4-r1 failed.
!!! Function econf, Line 362, Exitcode 1
!!! econf failed


real    289m0.627s
user    78m38.883s
sys     43m20.421s
Gentoo2 root # uname -a
Linux Gentoo2 2.6.5-gentoo-r1 #2 SMP Thu Jul 15 12:24:05 CEST 2004 i686 
Intel(R) Pentium(R) 4 CPU 2.66GHz GenuineIntel GNU/Linux

Gentoo2 root # dmesg
APIC (acpi_id[0x02] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 1
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: root=/dev/hda3 vga=795
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 2661.060 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Memory: 245432k/253888k available (3367k kernel code, 7748k reserved, 
1126k data, 204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 5242.88 BogoMIPS
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU:     After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU:     After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU:     After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 09
per-CPU timeslice cutoff: 1462.50 usecs.
task migration cache decay timeout: 2 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Total of 1 processors activated (5242.88 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 1-0, 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 
1-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2659.0815 MHz.
..... host bus clock speed is 132.0990 MHz.
Brought up 1 CPUs
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.20 entry at 0xec5a9, last bus=5
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
IOAPIC[0]: Set PCI routing entry (1-18 -> 0xa9 -> IRQ 18 Mode:1 Active:1)
00:00:1f[A] -> 1-18 -> IRQ 18
IOAPIC[0]: Set PCI routing entry (1-17 -> 0xb1 -> IRQ 17 Mode:1 Active:1)
00:00:1f[B] -> 1-17 -> IRQ 17
IOAPIC[0]: Set PCI routing entry (1-16 -> 0xb9 -> IRQ 16 Mode:1 Active:1)
00:00:1d[A] -> 1-16 -> IRQ 16
IOAPIC[0]: Set PCI routing entry (1-19 -> 0xc1 -> IRQ 19 Mode:1 Active:1)
00:00:1d[B] -> 1-19 -> IRQ 19
IOAPIC[0]: Set PCI routing entry (1-23 -> 0xc9 -> IRQ 23 Mode:1 Active:1)
00:00:1d[D] -> 1-23 -> IRQ 23
IOAPIC[0]: Set PCI routing entry (1-21 -> 0xd1 -> IRQ 21 Mode:1 Active:1)
00:05:04[C] -> 1-21 -> IRQ 21
IOAPIC[0]: Set PCI routing entry (1-22 -> 0xd9 -> IRQ 22 Mode:1 Active:1)
00:05:04[D] -> 1-22 -> IRQ 22
IOAPIC[0]: Set PCI routing entry (1-20 -> 0xe1 -> IRQ 20 Mode:1 Active:1)
00:05:02[A] -> 1-20 -> IRQ 20
number of MP IRQ sources: 15.
number of IO-APIC #1 registers: 24.
testing the IO APIC.......................
IO APIC #1......
.... register #00: 01000000
.......    : physical APIC id: 01
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00178020
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0020
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
 00 000 00  1    0    0   0   0    0    0    00
 01 0FF 0F  0    0    0   0   0    1    1    39
 02 0FF 0F  0    0    0   0   0    1    1    31
 03 0FF 0F  0    0    0   0   0    1    1    41
 04 0FF 0F  0    0    0   0   0    1    1    49
 05 0FF 0F  0    0    0   0   0    1    1    51
 06 0FF 0F  0    0    0   0   0    1    1    59
 07 0FF 0F  0    0    0   0   0    1    1    61
 08 0FF 0F  0    0    0   0   0    1    1    69
 09 0FF 0F  0    1    0   0   0    1    1    71
 0a 0FF 0F  0    0    0   0   0    1    1    79
 0b 0FF 0F  0    0    0   0   0    1    1    81
 0c 0FF 0F  0    0    0   0   0    1    1    89
 0d 0FF 0F  0    0    0   0   0    1    1    91
 0e 0FF 0F  0    0    0   0   0    1    1    99
 0f 0FF 0F  0    0    0   0   0    1    1    A1
 10 001 01  1    1    0   1   0    1    1    B9
 11 001 01  1    1    0   1   0    1    1    B1
 12 001 01  1    1    0   1   0    1    1    A9
 13 001 01  1    1    0   1   0    1    1    C1
 14 001 01  1    1    0   1   0    1    1    E1
 15 001 01  1    1    0   1   0    1    1    D1
 16 001 01  1    1    0   1   0    1    1    D9
 17 001 01  1    1    0   1   0    1    1    C9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 
'acpi=off'
vesafb: framebuffer at 0xf0000000, mapped to 0xd0000000, size 8000k
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: directcolor: size=8:8:8:8, shift=24:16:8:0
fb0: VESA VGA frame buffer device
Machine check exception polling timer started.
devfs: 2004-01-31 Richard Gooch (address@hidden)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 address@hidden).
udf: registering filesystem
SGI XFS with ACLs, security attributes, large block numbers, no debug 
enabled
SGI XFS Quota Management subsystem
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1, 8 throttling states)
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
Console: switching to colour frame buffer device 160x64
lp: driver loaded but no devices found
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 865 Chipset.
agpgart: Maximum main memory to use for agp memory: 196M
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xf0000000
mtrr: 0xf0000000,0x8000000 overlaps existing 0xf0000000,0x400000
[drm] Initialized i830 1.3.2 20021108 on minor 0
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
parport0: irq 7 detected
lp0: using parport0 (polling).
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Broadcom Gigabit Ethernet Driver bcm5700 with Broadcom NIC Extension 
(NICE) ver. 7.1.22 (01/07/04)
eth0: Broadcom NetXtreme Gigabit Ethernet for hp found at mem fc500000, 
IRQ 20, node addr 000d9dd15db6
eth0: Broadcom BCM5705 Integrated Copper transceiver found
eth0: Scatter-gather ON, 64-bit DMA ON, Tx Checksum ON, Rx Checksum ON, 
802.1Q VLAN ON, TSO ON
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x14c0-0x14c7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x14c8-0x14cf, BIOS settings: hdc:DMA, hdd:pio
hda: ST340014A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: MITSUMI CD-ROM FX48++M, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 >
hdc: ATAPI 48X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
libata version 1.02 loaded.
ata_piix version 1.01
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x14F8 ctl 0x1812 bmdma 0x14D0 irq 18
ata2: SATA max UDMA/133 cmd 0x1800 ctl 0x1816 bmdma 0x14D8 irq 18
ata1: SATA port disabled. ignoring.
ata1: thread exiting
scsi0 : ata_piix
ata2: SATA port disabled. ignoring.
scsi1 : ata_piix
ata2: thread exiting
ieee1394: raw1394: /dev/raw1394 device initialized
ehci_hcd 0000:00:1d.7: Intel Corp. 82801EB USB2
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 23, pci mem d086c000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:1d.0: Intel Corp. 82801EB USB
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 16, io base 00001440
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: Intel Corp. 82801EB USB
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 19, io base 00001460
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: Intel Corp. 82801EB USB
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 18, io base 00001480
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
drivers/usb/core/usb.c: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.4rc2 (Tue Mar 30 
08:19:30 2004 UTC).
PCI: Setting latency timer of device 0000:00:1f.5 to 64
hub 1-0:1.0: over-current change on port 7
intel8x0_measure_ac97_clock: measured 49255 usecs
intel8x0: clocking to 48000
ALSA device list:
  #0: Intel ICH5 at 0xfc480400, irq 17
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
IPv4 over IPv4 tunneling driver
ip_conntrack version 2.1 (1983 buckets, 15864 max) - 300 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <address@hidden>. 
http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S3 S4 S5)
UDF-fs DEBUG fs/udf/lowlevel.c:65:udf_get_last_session: 
CDROMMULTISESSION not supported: rc=-22
UDF-fs DEBUG fs/udf/super.c:1552:udf_fill_super: Multi-session=0
UDF-fs DEBUG fs/udf/super.c:540:udf_vrs: Starting at sector 16 (2048 
byte sectors)
UDF-fs: No VRS found
XFS mounting filesystem hda3
usb 4-1: new low speed USB device using address 2
Ending clean XFS mount for filesystem: hda3
VFS: Mounted root (xfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 204k freed
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on 
usb-0000:00:1d.2-1
Adding 500464k swap on /dev/hda2.  Priority:-1 extents:1
XFS mounting filesystem hda5
Ending clean XFS mount for filesystem: hda5
XFS mounting filesystem hda6
Ending clean XFS mount for filesystem: hda6
XFS mounting filesystem hda7
Ending clean XFS mount for filesystem: hda7
XFS mounting filesystem hda8
Ending clean XFS mount for filesystem: hda8
XFS mounting filesystem hda9
Ending clean XFS mount for filesystem: hda9
XFS mounting filesystem hda10
Ending clean XFS mount for filesystem: hda10
bcm5700: eth0 NIC Link is UP, 100 Mbps full duplex
usb 1-6: new high speed USB device using address 2
scsi2 : SCSI emulation for USB Mass Storage devices
  Vendor: HITACHI_  Model: DK23FB-40         Rev: 00M1
  Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
sda: assuming drive cache: write through
 /dev/scsi/host2/bus0/target0/lun0: p1
Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0,  type 0
USB Mass Storage device found at 2
mtrr: base(0xf0020000) is not aligned on a size(0x800000) boundary
mtrr: 0xf0000000,0x8000000 overlaps existing 0xf0000000,0x400000
atkbd.c: Unknown key released (translated set 2, code 0x7a on 
isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on 
isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
usb 1-6: USB disconnect, address 2
usb 1-6: new high speed USB device using address 3
scsi3 : SCSI emulation for USB Mass Storage devices
  Vendor: HITACHI_  Model: DK23FB-40         Rev: 00M1
  Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
sda: assuming drive cache: write through
 /dev/scsi/host3/bus0/target0/lun0: p1 p2
Attached scsi disk sda at scsi3, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi3, channel 0, id 0, lun 0,  type 0
USB Mass Storage device found at 3
usb 1-6: USB disconnect, address 3
usb 4-2: new full speed USB device using address 3
usb 4-2: USB disconnect, address 3
usb 4-2: new full speed USB device using address 4
usb 4-2: USB disconnect, address 4
usb 4-2: new full speed USB device using address 5
usb 4-2: USB disconnect, address 5
Gentoo2 root #