bug-libtool
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: libtool-1.15.23b (amd64-unknown-freebsd6.2) check results


From: David Fang
Subject: Re: libtool-1.15.23b (amd64-unknown-freebsd6.2) check results
Date: Fri, 23 Feb 2007 17:20:24 -0500 (EST)

> > Below is an excerpt from [g]make check of libtool-1.15.23b on
> > amd64-unknown-freebsd6.2 (most PASSes omitted):
>
> > FAIL: hardcode.test
> > FAIL: pdemo-make.test
> > SKIP: pdemo-exec.test
> > SKIP: pdemo-inst.test
> [...]
> > PASS: tagdemo-conf.test
> > PASS: tagdemo-make.test
> > FAIL: tagdemo-exec.test
> > PASS: tagdemo-shared.test
> > PASS: tagdemo-make.test
> > FAIL: tagdemo-exec.test
>
> Please show verbose output for these test groups (see README for how to
> do that).  Thanks.

Ralf,
        Attached (bz2).

I've now noticed something VERY disturbing from the top-level config.log.
On this amd64 host, there are no programs installed with suffix -3.4.0,
and CC and CXX are unset in the environment.  Yet configure picks up:

configure:3919: checking for ld used by gcc
configure:3986: result: g++-3.4.0
configure:3995: checking if the linker (g++-3.4.0) is GNU ld
configure:4010: result: no

Something is terribly wrong... I'm going to investigate further.  I can
also feel a big slap on my forehead coming...


David Fang
Computer Systems Laboratory
Electrical & Computer Engineering
Cornell University
http://www.csl.cornell.edu/~fang/
        -- (2400 baud? Netscape 3.0?? lynx??? No problem!)

Attachment: libtool-amd64-freebsd62-check.log.bz2
Description: Binary data


reply via email to

[Prev in Thread] Current Thread [Next in Thread]