Re: system reconfigure, Git error: the SSL certificate is invalid

[Andreas Reuleaux]

To answer my own question (and for the record, or for anyone interested):

Doing "guix pull" as root, i.e. several cycles of

  # guix pull
  # guix system reconfigure /etc/config.scm
  # reboot

really, all of them as root, did update my system enough, to make my
usual cycle work again, i.e.

(as a regular user rx)
  $ guix pull 

and then (as root):
  # /home/rx/.config/guix/current/bin/guix system reconfigure /etc/config.scm

works again for me, now. 

Thus, section 3.7 of the Manual, which suggests to  
"guix pull" only ever as a regular user, seems a bit too over-optimistic to me.

I still don't know exactly, what was causing this issue, but fine
with me, if I update my system as root once in a while.

Thanks,
  -A



Andreas Reuleaux <rx@a-rx.info> writes:

> Hi,
>
> In a slight variation of section 3.7 of the Guix Manual ("After System
> Installation"), I regularly do 
>
>   guix pull
>
> as a regular user (rx in my case), and then (using rx's guix command),
> as root:
>
> # /home/rx/.config/guix/current/bin/guix system reconfigure /etc/config.scm
>
> (i.e. instead of using sudo, as suggested in the manual)
>
> This combo used to work fine for me for quite a while. Now, since a few days,
> having done my 
>
>   guix pull
>
> step (as user rx), which still works fine for me (updates my guix system), I 
> get an error when
> trying the above reconfigure step:
>
>     root@pc ~# /home/rx/.config/guix/current/bin/guix system reconfigure 
> /etc/config.scm
>     Backtrace:
>     In ice-9/boot-9.scm:
>       1731:15 19 (with-exception-handler #<procedure 7f5dc055ef30 at ic…> …)
>     In guix/scripts/system.scm:
>        1286:8 18 (_)
>     In guix/status.scm:
>         776:4 17 (call-with-status-report _ _)
>     In guix/scripts/system.scm:
>        1125:4 16 (_)
>     In ice-9/boot-9.scm:
>       1736:10 15 (with-exception-handler _ _ #:unwind? _ # _)
>     In guix/store.scm:
>        631:22 14 (thunk)
>        1299:8 13 (call-with-build-handler #<procedure 7f5db7c4db70 at g…> …)
>       2025:24 12 (run-with-store #<store-connection 256.99 7f5db7bd4c80> …)
>     In guix/scripts/system.scm:
>       1145:15 11 (_ _)
>         783:4 10 (perform-action reconfigure #<<operating-system> kerne…> …)
>     In guix/scripts/system/reconfigure.scm:
>         323:2  9 (check-forward-update _)
>     In srfi/srfi-1.scm:
>        691:23  8 (filter-map #<procedure 7f5dc4094140 at guix/scripts…> . #)
>     In guix/scripts/system/reconfigure.scm:
>        330:37  7 (_ #<<channel> name: guix url: "https://git.savannah.gn…>)
>     In guix/git.scm:
>        329:29  6 (update-cached-checkout "https://git.savannah.gnu.org/…"; …)
>     In ice-9/boot-9.scm:
>       1736:10  5 (with-exception-handler _ _ #:unwind? _ # _)
>     In git/clone.scm:
>          46:8  4 (_ _ _ _)
>     In git/bindings.scm:
>          77:2  3 (raise-git-error _)
>     In ice-9/boot-9.scm:
>       1669:16  2 (raise-exception _ #:continuable? _)
>       1669:16  1 (raise-exception _ #:continuable? _)
>       1669:16  0 (raise-exception _ #:continuable? _)
>
>     ice-9/boot-9.scm:1669:16: In procedure raise-exception:
>     Git error: the SSL certificate is invalid
>
>     root@pc ~#
>
>
> I have no clue - and I am fairly new to guix, and yet have many thing to 
> learn - so bear with me, please -
> I would prefer to make my next guix steps, however, having a working / 
> up-to-date system. 
>
> Thanks in advance.
>   -A
>
>
>
>