[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: freecad 19.1 / flatpak
From: |
Ekaitz Zarraga |
Subject: |
Re: freecad 19.1 / flatpak |
Date: |
Sun, 11 Apr 2021 16:45:05 +0000 |
Hi,
You can try with the file attached.
You just need to run the following, considering `freecad.scm` is the attached
file, and that you are in the folder that contains the file.
```
guix build -f freecad.scm
```
Like half an hour later, you'll get an output similar to this:
```
$ guix build -f freecad.scm
>>TONS OF COMPILATION RELATED NONSENSE<<
/gnu/store/74c1nrijb1x29pj9f94265zaq8frqf4f-freecad-0.19.1
```
That's the folder where the result of the build is. You can run that freecad
using the path you got like this:
```
$ /gnu/store/74c1nrijb1x29pj9f94265zaq8frqf4f-freecad-0.19.1/bin/FreeCAD
```
Tell me if it works and how does it look.
If it works fine I'll send a patch to Guix with this package and you'll soon
have it in Guix. Also, if you need it now, you can use the file I gave you and
install it from there with the same -f trick, or even create an environment for
it, that way it will be easier to run.
For any question you have, just ask.
Good luck!
Ekaitz
freecad.scm
Description: Text Data
- Re: freecad 19.1 / flatpak, Gary Johnson, 2021/04/02
- Re: freecad 19.1 / flatpak, Christophe Pisteur, 2021/04/03
- Re: freecad 19.1 / flatpak, Ekaitz Zarraga, 2021/04/03
- Re: freecad 19.1 / flatpak, Christophe Pisteur, 2021/04/03
- Re: freecad 19.1 / flatpak, Ekaitz Zarraga, 2021/04/03
- Re: freecad 19.1 / flatpak, Ekaitz Zarraga, 2021/04/08
- Re: freecad 19.1 / flatpak, Christophe Pisteur, 2021/04/11
- Re: freecad 19.1 / flatpak,
Ekaitz Zarraga <=
- Re: freecad 19.1 / flatpak, Christophe Pisteur, 2021/04/11
- Re: freecad 19.1 / flatpak, Ekaitz Zarraga, 2021/04/11
- Re: freecad 19.1 / flatpak, Luis Felipe, 2021/04/11
- Re: freecad 19.1 / flatpak, Ekaitz Zarraga, 2021/04/11
- Re: freecad 19.1 / flatpak, Ekaitz Zarraga, 2021/04/11
- Re: freecad 19.1 / flatpak, Ekaitz Zarraga, 2021/04/11
- Re: freecad 19.1 / flatpak, Luis Felipe, 2021/04/11
- Re: freecad 19.1 / flatpak, Christophe Pisteur, 2021/04/11
- Re: freecad 19.1 / flatpak, Ekaitz Zarraga, 2021/04/11
- Re: freecad 19.1 / flatpak, Christophe Pisteur, 2021/04/13