[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: freecad 19.1 / flatpak
|
From: |
Ekaitz Zarraga |
|
Subject: |
Re: freecad 19.1 / flatpak |
|
Date: |
Sun, 11 Apr 2021 19:30:11 +0000 |
> Many thanks!
> Unfortunately, the build does not work and has stopped after a few minutes.
> See attached the build log.
>
> Christophe
I'll try to compile it again... I wasn't expecting the package to fail. LOL
I'll keep you posted, thanks for the log!
- Re: freecad 19.1 / flatpak, Gary Johnson, 2021/04/02
- Re: freecad 19.1 / flatpak, Christophe Pisteur, 2021/04/03
- Re: freecad 19.1 / flatpak, Ekaitz Zarraga, 2021/04/03
- Re: freecad 19.1 / flatpak, Christophe Pisteur, 2021/04/03
- Re: freecad 19.1 / flatpak, Ekaitz Zarraga, 2021/04/03
- Re: freecad 19.1 / flatpak, Ekaitz Zarraga, 2021/04/08
- Re: freecad 19.1 / flatpak, Christophe Pisteur, 2021/04/11
- Re: freecad 19.1 / flatpak, Ekaitz Zarraga, 2021/04/11
- Re: freecad 19.1 / flatpak, Christophe Pisteur, 2021/04/11
- Re: freecad 19.1 / flatpak,
Ekaitz Zarraga <=
- Re: freecad 19.1 / flatpak, Luis Felipe, 2021/04/11
- Re: freecad 19.1 / flatpak, Ekaitz Zarraga, 2021/04/11
- Re: freecad 19.1 / flatpak, Ekaitz Zarraga, 2021/04/11
- Re: freecad 19.1 / flatpak, Ekaitz Zarraga, 2021/04/11
- Re: freecad 19.1 / flatpak, Luis Felipe, 2021/04/11
- Re: freecad 19.1 / flatpak, Christophe Pisteur, 2021/04/11
- Re: freecad 19.1 / flatpak, Ekaitz Zarraga, 2021/04/11
- Re: freecad 19.1 / flatpak, Christophe Pisteur, 2021/04/13
- Re: freecad 19.1 / flatpak, Ekaitz Zarraga, 2021/04/13
- Re: freecad 19.1 / flatpak, Ekaitz Zarraga, 2021/04/17