[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
partition table on guix system
From: |
christophe . pisteur |
Subject: |
partition table on guix system |
Date: |
Sat, 12 Jun 2021 17:31:13 +0000 |
Hello,
I am trying to install guix system 1.3 on a lenovo t400 (libreboot) and
I have a problem with the manual partition table during the
installation.
I want an encrypted /home on a separate sata drive and the rest on the /
partition (no encryption). But the installer fails when formatting and I
don't understand the error message.
Here is the partition table I made:
ATA ... /dev/sda 128 GB msdos
1. normal 8GB linux-swap (v1)
2. normal 120GB ext4 boot/ -> bootable: yes,
encrypton: no
ATA .... /dev/sdb 1000GB msdos
1. normal 1000GB ext4 /home crypthome
When I confirm the table, the installer asks me for the key to encrypt,
then starts to format, then aborts with a error message and starts again
at the beginning of the installation process.
where is the error I made?
Thanks for your help
Christophe
- partition table on guix system,
christophe . pisteur <=
- Re: partition table on guix system, Nikolay Velyurov, 2021/06/12
- Re: partition table on guix system, christophe . pisteur, 2021/06/13
- Re: partition table on guix system, Mathieu Othacehe, 2021/06/13
- Re: partition table on guix system, Christophe Pisteur, 2021/06/13
- Re: partition table on guix system, Mathieu Othacehe, 2021/06/13
- Re: partition table on guix system, Christophe Pisteur, 2021/06/16
- Re: partition table on guix system, Mathieu Othacehe, 2021/06/18
- Re: partition table on guix system, Christophe Pisteur, 2021/06/19
- Re: partition table on guix system, Mathieu Othacehe, 2021/06/19