[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Setting up multiple NICs
|
From: |
Lars Rustand |
|
Subject: |
Re: Setting up multiple NICs |
|
Date: |
Wed, 29 Nov 2023 07:26:03 +0100 |
On 23/11/24 06:08AM, Oleg Pykhalov wrote:
> Hello,
>
> Could you show the configuration, please?
Sure, this is what I have at the moment:
(service static-networking-service-type
(list (static-networking
(links
(list (network-link
(name "dmz")
(type 'vlan)
(arguments '((id . 3)
(link . "enp4s0f1"))))
(network-link
(name "home")
(type 'vlan)
(arguments '((id . 4)
(link . "enp4s0f1"))))
(network-link
(name "iot")
(type 'vlan)
(arguments '((id . 5)
(link . "enp4s0f1"))))
(network-link
(name "server")
(type 'vlan)
(arguments '((id . 6)
(link . "enp4s0f1"))))
(network-link
(name "management")
(type 'vlan)
(arguments '((id . 2)
(link . "enp4s0f1"))))))
(addresses
(list (network-address
(device "enp2s0")
(value "192.168.10.2/24"))
(network-address
(device "dmz@enp4s0f1")
(value "10.0.3.1/24"))
(network-address
(device "home@enp4s0f1")
(value "10.0.4.1/24"))
(network-address
(device "iot@enp4s0f1")
(value "10.0.5.1/24"))
(network-address
(device "server@enp4s0f1")
(value "10.0.6.1/24"))
(network-address
(device "management@enp4s0f1")
(value "192.168.0.2/24")))))))
> Also, a list of the networking
> devices with ‘ip -one link’ and ‘ip -one address’ command would be
> helpful for cathing an error.
lars@router ~$ ip -one link
1: lo: <LOOPBACK,MULTICAST,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
mode DEFAULT group default qlen 1000\ link/loopback 00:00:00:00:00:00 brd
00:00:00:00:00:00
2: enp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
mode DEFAULT group default qlen 1000\ link/ether 00:1d:60:cb:15:5b brd
ff:ff:ff:ff:ff:ff
3: enp4s0f0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT
group default qlen 1000\ link/ether 28:80:23:a3:0f:80 brd ff:ff:ff:ff:ff:ff
4: enp4s0f1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT
group default qlen 1000\ link/ether 28:80:23:a3:0f:81 brd ff:ff:ff:ff:ff:ff
5: enp4s0f2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT
group default qlen 1000\ link/ether 28:80:23:a3:0f:82 brd ff:ff:ff:ff:ff:ff
6: enp4s0f3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT
group default qlen 1000\ link/ether 28:80:23:a3:0f:83 brd ff:ff:ff:ff:ff:ff
lars@router ~$ ip -one address
1: lo inet 127.0.0.1/8 scope global lo\ valid_lft forever
preferred_lft forever
1: lo inet6 ::1/128 scope host \ valid_lft forever preferred_lft
forever
2: enp2s0 inet 192.168.10.2/24 scope global enp2s0\ valid_lft forever
preferred_lft forever
2: enp2s0 inet6 fe80::21d:60ff:fecb:155b/64 scope link \ valid_lft
forever preferred_lft forever
signature.asc
Description: PGP signature