help-hurd
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Network won't run


From: Marco Gerards
Subject: Re: Network won't run
Date: 08 Oct 2003 20:28:55 +0200
User-agent: Gnus/5.09 (Gnus v5.9.0) Emacs/21.2

"eniac@sdf-eu.org" <eniac@sdf-eu.org> writes:

> Hello,
> I've got a 3com  PCI 3c905C NIC
> In order to start my network I did
> settrans -fgap /servers/socket/2 /hurd/pfinet -i eth0
> this didn't work gave me no errors, but ping 192.168.0.172 (an other
> pc on my network) was unreachable.

Try something like:

settrans -fgap /servers/socket/2 /hurd/pfinet -a 192.168.0.123 -m 255.255.255.0 
-i eth0

Or is it socket instead of sockets.  I am confused today.

> I also tryed
> settrans -ap /servers/socket/2 /hurd/pfinet -i eth0

That is about the same.

> Also does hurd have dhcp support ?

Only if you volunteer :)

This won't be too hard and I can help you a bit.  I already put some
patches on savannah.  If you are interested, please tell me.

There are 3 things that need to be done:

- Add some required interfaces to pfinet.  This is almost done, please
  don't look at this stuff, just kick my ass. :)

- Implement these interfaces as ioctls in glibc.

- Add support to one (or if possible some) dhcp clients.

Thanks,
Marco





reply via email to

[Prev in Thread] Current Thread [Next in Thread]