help-hurd
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Network support


From: Evans Winner
Subject: Re: Network support
Date: Sat, 03 May 2008 12:45:42 -0600
User-agent: Gnus/5.13 (Gnus v5.13) Emacs/23.0.60 (gnu/linux)

Evans Winner <thorne@timbral.net> writes:

    So, is all this likely to mean that there is no support
    for my NIC?

As usual, after all my futzing, when I finally came crawling
to the help list, I then found the relevant thread in the
archive five minutes later.  So below is maybe some relevant
additional information.  It looks as if it can find the
Ethernet card, but can't assign it an IRQ.

lspci.  The last line is the NIC.

,----[ lspci ]
| 00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM 
Controller/Host-Hub Interface (rev 01)
| 00:02.0 VGA compatible controller: Intel Corporation 
82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
| 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM 
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
| 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM 
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
| 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM 
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
| 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI 
Controller (rev 01)
| 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 81)
| 00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface 
Bridge (rev 01)
| 00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 
01)
| 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus 
Controller (rev 01)
| 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM 
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
| 01:0b.0 Communication controller: Agere Systems LT WinModem (rev 02)
| 01:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL-8139/8139C/8139C+ (rev 10)
`----

and from /dev/klog:

,----[ cat /hurd/log ]
| GNU Mach 1.3.99
| AT386 boot: physical memory from 0x0 to 0x1f7fa000
| GNU Mach 1.3.99
| AT386 boot: physical memory from 0x0 to 0x1f7fa000
| Enabling FXSR
| pcibios_init : BIOS32 Service Directory structure at 0xf1720
| pcibios_init : BIOS32 Service Directory entry at 0xf10d0
| pcibios_init : PCI BIOS revision 2.10 entry at 0xf1100
| Probing PCI hardware.
| hd0: Maxtor 2F040J0, 39205MB w/2048kB Cache, CHS=4998/255/63
| hd1: Maxtor 92049U6, 19473MB w/2048kB Cache, CHS=2637/240/63
| ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
| Floppy drive(s): fd0 is 1.44M
| FDC 0 is a post-1991 82077
| Failed initialization of WD-7000 SCSI card!
| EATA0: address 0x1f0 in use, skipping probe.
| ppa: Version 1.42
| ppa: Probing port 03bc
| ppa: Probing port 0378
| ppa:     SPP port present
| ppa:     ECP with a i byte FIFO present
| ppa:     PS/2 bidirectional port present
| ppa:     Passed Intel bug check.
| ppa: Probing port 0278
| scsi : 0 hosts.
| scsi : detected total.
| rtl8139.c:v1.23a 8/24/2003 Donald Becker, becker@scyld.com.
|  http://www.scyld.com/network/rtl8139.html
| PCI device 'RealTek RTL8139C Fast Ethernet' was not assigned an IRQ.
| It will not be activated.
| via-rhine.c:v1.16 7/22/2003  Written by Donald Becker <becker@scyld.com>
|   http://www.scyld.com/network/via-rhine.html
| 0 3c515 cards found.
| eth0: D-Link DE-600 pocket adapter: not at I/O 0x378.
| D-Link DE-620 pocket adapter not identified in the printer port
| PCI device 'RealTek RTL8139C Fast Ethernet' was not assigned an IRQ.
| It will not be activated.
| via-rhine.c:v1.16 7/22/2003  Written by Donald Becker <becker@scyld.com>
|   http://www.scyld.com/network/via-rhine.html
| 0 3c515 cards found.
| eth1: D-Link DE-600 pocket adapter: not at I/O 0x378.
| D-Link DE-620 pocket adapter not identified in the printer port
| Partition check (DOS partitions):
|  hd0: hd0s1 hd0s2 < hd0s5 hd0s6 hd0s7 hd0s8 hd0s9 >
|  hd1: [PTBL] [1027/255/63] hd1s1 hd1s2 hd1s3
| Linux PCMCIA Card Services 3.2.8
|   kernel build: 2.0.36 
|   options:  [pci]
| PCI routing table version 1.0 at 0xf1670
| Intel ISA/PCI/CardBus PCIC probe:
|   no bridges found.
| ds: no socket drivers loaded!
| 
| 
| xirc2ps_cs.c 1.31 1998/12/09 19:32:55 (dd9jn+kvh)
| com0: at atbus0, port = 3f8, spl = 6, pic = 4. (DOS COM1)
| lpr0: at atbus1, port = 378, spl = 6, pic = 7.
| module 0: (hd1,0)/hurd/ext2fs.static 
--multiboot-command-line=${kernel-command-line} --host-priv-port=${host-port} 
--device-master-port=${device-port} --exec-server-task=${exec-task} -T typed 
${root} $(task-create) $(task-resume) module 1: (hd1,0)/lib/ld.so.1 /hurd/exec 
$(exec-task=task-create)                                                        
                                                                                
                             2 multiboot modules                                
                                                                                
                                                                                
                             task loaded: (hd1,0)/hurd/ext2fs.static 
--multiboot-command-line=(hd1,0)/boot/gnumach.gz root=device:hd1s1 
--host-priv-port=1 --device-master-port=2 --exec-server-task=3 -T typed 
device:hd1s1
| task loaded: (hd1,0)/lib/ld.so.1 /hurd/exec
| 
| start (hd1,0)/hurd/ext2fs.static: 
`----





reply via email to

[Prev in Thread] Current Thread [Next in Thread]