[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Debian/Hurd won't boot
From: |
olafBuddenhagen |
Subject: |
Re: Debian/Hurd won't boot |
Date: |
Fri, 22 Aug 2008 02:18:13 +0200 |
User-agent: |
Mutt/1.5.18 (2008-05-17) |
Hi,
On Mon, Aug 18, 2008 at 04:35:07PM +0200, Daniel Kraft wrote:
> When I try to boot mach / the Hurd as described, I get some output first
> but after about 10 seconds the machine automatically reboots (thus it
> seems as if the bootstrap panic'ed or something like that); the screen
> prints something about ext2fs.static, but it goes away immediatelly so I
> unfortunatelly can't tell what the message is exactly about...
>
> The documentation suggests that a common problem is shared IRQs, I
> checked /proc/interrupts on my GNU/Linux system:
[...]
> 17: 0 IO-APIC-fasteoi ndiswrapper
> 18: 0 IO-APIC-fasteoi SiS SI7012
> 19: 12044 IO-APIC-fasteoi eth0
> 20: 3509 IO-APIC-fasteoi ohci_hcd:usb2
> 21: 12586 IO-APIC-fasteoi ohci_hcd:usb3
> 23: 3 IO-APIC-fasteoi ehci_hcd:usb1
Unfortunately gnumach can't cope with interrupts above 15 either...
But I'm not sure this is the reason of your problem.
Try adding -H to the gnumach command line -- with a bit of luck, it will
halt instead of rebooting with that...
-antrik-