module libposix

[Bruce Korb]

Hi,

I seem to be missing something and can't quite figure it out.

I get these messages during autoreconf:

>>build_libposix> autoreconf
>configure.ac:29: required file `build-aux/ltmain.sh' not found
>libposix/Makefile.am: object `pt_chown.$(OBJEXT)' \
> created both with libtool and without
>autoreconf: automake failed with exit status: 1

My configure.ac looks like this:
> AC_INIT([gnulib],[2010.09.18],address@hidden,[libposix],
>   [http://www.gnu.org/software/gnulib])
> AC_CONFIG_SRCDIR([libposix/version.c])
> AC_CONFIG_AUX_DIR([build-aux])
> AM_INIT_AUTOMAKE
> AC_CONFIG_HEADERS([config.h])
> AC_PROG_CC
> AC_PROG_INSTALL
> AC_PROG_MAKE_SET
> # For autobuild.
> AC_CANONICAL_BUILD
> AC_CANONICAL_HOST
> m4_pattern_forbid([^gl_[A-Z]])dnl the gnulib macro namespace
> m4_pattern_allow([^gl_ES$])dnl a valid locale name
> m4_pattern_allow([^gl_LIBOBJS$])dnl a variable
> m4_pattern_allow([^gl_LTLIBOBJS$])dnl a variable
> AC_PROG_RANLIB
> AM_PROG_CC_C_O
> gl_USE_SYSTEM_EXTENSIONS
> AC_FUNC_FSEEKO
> gl_FP_IEEE
> AC_FUNC_FSEEKO
> AC_FUNC_FSEEKO
> dnl Some compilers (e.g., AIX 5.3 cc) need to be in c99 mode
> dnl for the builtin va_copy to work.  With Autoconf 2.60 or later,
> dnl AC_PROG_CC_STDC arranges for this.  With older Autoconf AC_PROG_CC_STDC
> dnl shouldn't hurt, though installers are on their own to set c99 mode.
> AC_PROG_CC_STDC
> gl_THREADLIB_EARLY
> AC_PROG_LIBTOOL
> gl_libdeps=
> gl_ltlibdeps=
> AC_DEFUN([gl_INIT], [

with the rest of the file dumped into gl_INIT and invoked at the very end.
The piece of the Makefile.am that is causing trouble is:

> ## begin gnulib module pt_chown
>
> # TODO: Add rules for installing as setuid root (chown root, chmod a=rx,u+s).
> # The next line can be removed once we assume automake >= 1.11.
> pkglibexecdir = $(libexecdir)/@PACKAGE@
> pkglibexec_PROGRAMS = pt_chown
> pt_chown_LDADD = libposix.la
>
> EXTRA_DIST += pt_chown.c pty-private.h
>
> EXTRA_libposix_la_SOURCES += pt_chown.c
>
> ## end   gnulib module pt_chown

Here are my edits to the generated configure.ac file, as a backward patch,
RE: 
http://www.gnu.org/software/gnulib/manual/html_node/POSIX-Substitutes-Library.html

--- configure.ac        2010-09-18 14:54:15.000000000 -0700
+++ configure.ac-saved  2010-09-18 12:33:25.000000000 -0700
@@ -1,9 +1,10 @@
-AC_INIT([gnulib],[2010.09.18],address@hidden,[libposix],
-     [http://www.gnu.org/software/gnulib])
-AC_CONFIG_SRCDIR([libposix/version.c])
+# Process this file with autoconf to produce a configure script.
+AC_INIT([dummy], [0])
 AC_CONFIG_AUX_DIR([build-aux])
 AM_INIT_AUTOMAKE
+
 AC_CONFIG_HEADERS([config.h])
+
 AC_PROG_CC
 AC_PROG_INSTALL
 AC_PROG_MAKE_SET
@@ -26,7 +33,8 @@
 dnl shouldn't hurt, though installers are on their own to set c99 mode.
 AC_PROG_CC_STDC
 gl_THREADLIB_EARLY
-AC_PROG_LIBTOOL
+AM_CONDITIONAL([GL_COND_LIBTOOL], [false])
+gl_cond_libtool=false
 gl_libdeps=
 gl_ltlibdeps=
 AC_DEFUN([gl_INIT], [
@@ -37,9 +45,10 @@
   m4_pushdef([gl_LIBSOURCES_LIST], [])
   m4_pushdef([gl_LIBSOURCES_DIR], [])
   gl_COMMON
-gl_source_base='libposix'
+gl_source_base='gllib'
 gl_FUNC__EXIT
 gl_STDLIB_MODULE_INDICATOR([_Exit])
+
 AC_REQUIRE([gl_HEADER_SYS_SOCKET])
 if test "$ac_cv_header_winsock2_h" = yes; then
   AC_LIBOBJ([accept])
@@ -819,11 +1223,12 @@
     AC_SUBST([gl_LIBOBJS], [$gl_libobjs])
     AC_SUBST([gl_LTLIBOBJS], [$gl_ltlibobjs])
   ])
-  LIBPOSIX_LIBDEPS="$gl_libdeps"
-  AC_SUBST([LIBPOSIX_LIBDEPS])
-  LIBPOSIX_LTLIBDEPS="$gl_ltlibdeps"
-  AC_SUBST([LIBPOSIX_LTLIBDEPS])
+  LIBGNU_LIBDEPS="$gl_libdeps"
+  AC_SUBST([LIBGNU_LIBDEPS])
+  LIBGNU_LTLIBDEPS="$gl_ltlibdeps"
+  AC_SUBST([LIBGNU_LTLIBDEPS])
 ])
+
 # Like AC_LIBOBJ, except that the module name goes
 # into gl_LIBOBJS instead of into LIBOBJS.
 AC_DEFUN([gl_LIBOBJ], [
@@ -843,7 +1250,7 @@
 AC_DEFUN([gl_LIBSOURCES], [
   m4_foreach([_gl_NAME], [$1], [
     m4_if(_gl_NAME, [alloca.c], [], [
-      m4_define([gl_LIBSOURCES_DIR], [libposix])
+      m4_define([gl_LIBSOURCES_DIR], [gllib])
       m4_append([gl_LIBSOURCES_LIST], _gl_NAME, [ ])
     ])
   ])
@@ -848,6 +1255,8 @@
     ])
   ])
 ])
+
 gl_INIT
-AC_CONFIG_FILES([Makefile libposix/Makefile glm4/Makefile])
+
+AC_CONFIG_FILES([Makefile gllib/Makefile glm4/Makefile])
 AC_OUTPUT