RE: [Paparazzi-devel] Halfbase reply to all

[mark.griffin]

Dear Jeff,
People including myself placed orders with you and nothing happened for
more than one month. You disappeared and no one could contact you.

Trust in you has thus disappeared as you appear to be a con man. You
cannot conduct business this way.

For anyone brave enough to place an order, I strongly suggest you pay
with PayPal as you have some means of recovering your money if things go
wrong. You don't have this with bank wire.

Regards, Mark
 

-----Original Message-----
From: address@hidden
[mailto:address@hidden On
Behalf Of Jeffrey S
Sent: mercredi, 22. octobre 2008 20:45
To: address@hidden
Subject: [Paparazzi-devel] Halfbase reply to all

Dear All,

I hope all is well!

First of all,  apologies for the continue delated on some orders.

May all the Paid & Due, remaining orders:  please send a simply e-mail
to me!   I would get your order follow up or Refund!   1 - 2 weeks in
enough for me to clear all the remain orders.

I do would continue working on Halfbase supply!   As it is part of my
interest on supporting UAV development, not about money!

But It is not as other said I was disappear!

E.g. David Buzz Carlson,  He on the mailing said that I was disappear,
can't contact on phone, also never will order with me.
After all, had call me up to want order parts for making 20 pcs Tiny
V2.11, to supply his client orders!

Also he said my continue contribute in supply would help getting more
people into development!

- -- - - ------ -- ---- -- - -- - - -- - - -  -- --  - - - - - - - - -
- - - - - - - - - - - -
Recently I was getting real busy, also I have too many troubles with
Paypal.  Where as some clients misused their service.  Having their
order received, by returning just a Sensor.   They holding up the
total amount with Paypal!  With late reply to Paypal of course!
Even after all,  6% exchange rate & service have been charge by
Paypal!     Me & client have wrote to Paypal many times,  but no
response to the case at all!
Some received their good.  But never notice Paypal to cancel the Claim!

Therefore my Paypal account was stuck with something like that,  which
giving me to much trouble as well as the time to deal with special
request & orders, (e.g. different custom made cables,  different
arrangements, Tax, Delivery method, etc.)     I realized my times &
resource doesn't allow to continue work on this.


Remind!  Some order I didn't even earn anything at the, like the Cables,
plugs, LPC, sensors ( How would I Finance to do all this processing
work, by not spending my time working on other jobs? ) Everything has a
cost,  there is no magic!  I do needed time to
Finance myself, in order to work on this!    But Time is very limited,
In my case!


In future, I will had everything listed on the website, Would not,  deal
with small quantity custom order.
Only sell & supply what it is there on the web, in order to guarantee to
all process of manufacturing to run smoothly & hopefully timely manner!
Payment - Bank Wire (TT) would be suggested!


I must have too much Junk mail recently!   As where I work has not
been able to check & reply e-mail everyday!
As well as the price I offer, have raised other interest to attack my
mail!



Best Regards,


Jeffrey Szeto

General Research & Marketing
Halfbase - Tak Lee Trading Co., HK

HK mobile:      (+852) 92773486
China mobile:   (+ 86) 15814 707 156    <-- Call This, instead !

On Oct 23, 2008, at 12:00 AM, address@hidden wrote:

> Send Paparazzi-devel mailing list submissions to
>       address@hidden
>
> To subscribe or unsubscribe via the World Wide Web, visit
>       http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> or, via email, send a message with subject or body 'help' to
>       address@hidden
>
> You can reach the person managing the list at
>       address@hidden
>
> When replying, please edit your Subject line so it is more specific 
> than "Re: Contents of Paparazzi-devel digest..."
>
>
> Today's Topics:
>
>   1. Re: servos on reacting on the tiny 1.1 (Pascal Brisset)
>   2. RE: servos on reacting on the tiny 1.1 (Chen)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 21 Oct 2008 18:35:21 +0200
> From: Pascal Brisset <address@hidden>
> Subject: Re: [Paparazzi-devel] servos on reacting on the tiny 1.1
> To: address@hidden
> Message-ID: <address@hidden>
> Content-Type: text/plain;     charset=ISO-8859-1;     format=flowed
>
> Hi,
>
> the values sent to the servos can be displayed with the ACTUATORS 
> message. This message is not sent by default. To get it, you have to 
> set the telemetry mode of the fbw process in "debug" mode. Two 
> solutions:
> - Add the telemetry_mode_Fbw variable to your settings file (similar 
> to the telemetry_mode_Ap entry in tuning.xml file), and set the 
> variable to
> 1 (through the GCS) while the board is running
> - Just add
>
> ap.CFLAGS += -DTELEMETRY_MODE_FBW=1
>
> to the makefile section of the airframe file.
>
> If these values are correct, then you will probably have to check the 
> signal with a scope ...
>
> --Pascal
>
>
>
> C Kuo wrote:
>> hi guys
>>
>>  i have currently playing around tiny 1.1 upto just before the test 
>> flight, and have some problem with the servos and speed controller 
>> (they simply do get any
>> signal)
>>
>>  I have test every link on the ground, wireless link is ok, gps is 
>> ok, even on the GCS, when i change my throttle level on my r/c 
>> controller, it shows on the GCS as well, but some how, the servos 
>> just don't react.
>>
>> here is my airframe file on the setting
>>
>> <airframe name="FunJetmm Tiny 1.1">
>>
>> <!-- commands section -->
>>  <servos>
>>    <servo name="THROTTLE"      no="0" min="1550" neutral="1550"  
>> max="1900"/>
>>    <servo name="AILEVON_LEFT"  no="2" min="1100" neutral="1504"  
>> max="1900"/>
>>    <servo name="AILEVON_RIGHT" no="1" min="1900" neutral="1495"  
>> max="1100"/>
>>  </servos>
>>
>>  <commands>
>>    <axis name="THROTTLE" failsafe_value="0"/>
>>    <axis name="ROLL"     failsafe_value="0"/>
>>    <axis name="PITCH"    failsafe_value="0"/>
>> </commands>
>>
>>  <rc_commands>
>>    <set command="THROTTLE" value="@THROTTLE"/>
>>    <set command="ROLL"     value="@ROLL"/>
>>    <set command="PITCH"    value="@PITCH"/>
>> </rc_commands>
>>
>>  <section name="MIXER">
>>    <define name="AILEVON_AILERON_RATE" value="-0.45"/>
>>    <define name="AILEVON_ELEVATOR_RATE" value="0.8"/>  </section>
>>
>> command_laws>
>>    <let var="aileron"  value="@ROLL  * AILEVON_AILERON_RATE"/>
>>    <let var="elevator" value="@PITCH * AILEVON_ELEVATOR_RATE"/>
>>    <set servo="THROTTLE"      value="@THROTTLE"/>
>>    <set servo="AILEVON_LEFT"  value="$elevator + $aileron"/>
>>    <set servo="AILEVON_RIGHT" value="$elevator - $aileron"/>  
>> </command_laws> ...etc
>> makefile>
>> include $(PAPARAZZI_SRC)/conf/autopilot/tiny.makefile
>>
>> FLASH_MODE=IAP
>>
>> ap.CFLAGS +=  -DFBW -DAP -DCONFIG=\"tiny_1_1.h\" -DLED -DTIME_LED=1 
>> ap.srcs = sys_time.c $(SRC_ARCH)/sys_time_hw.c $(SRC_ARCH)/armVIC.c 
>> main_fbw.c main_ap.c main.c
>>
>> ap.srcs += commands.c
>>
>> ap.CFLAGS += -DACTUATORS=\"servos_4015_MAT_hw.h\" -DSERVOS_4015_MAT 
>> ap.srcs += $(SRC_ARCH)/servos_4015_MAT_hw.c actuators.c
>>
>>
>> and following is my r/c file
>>
>>
>> <!DOCTYPE radio SYSTEM "radio.dtd">
>> <radio name="Futaba T6EXAP" data_min="900" data_max="2100" sync_min 
>> ="5000"
>> sync_max ="15000">
>> <channel ctl="right_stick_horiz" function="ROLL"     max="1074"  
>> neutral="1520"
>> min="1942" average="0"/>
>> <channel ctl="right_stick_vert" function="PITCH"    min="1109"  
>> neutral="1521"
>> max="1938" average="0"/>
>> <channel ctl="left_stick_vert" function="THROTTLE" min="1107"  
>> neutral="1107"
>> max="1933" average="0"/>
>> <channel ctl="left_stick_horiz" function="YAW"      min="1937"  
>> neutral="1524"
>> max="1103" average="0"/>
>> <channel ctl="switch_L" function="GAIN1"     min="1100"  
>> neutral="1500"
>> max="3000" average="1"/>
>> <channel ctl="switch_R" function="MODE"    min="1100"  
>> neutral="1500" max="1900"
>> average="1"/>
>> </radio>
>>
>>
>>
>>  Does any one have any idea?
>>
>> Thanks
>>
>>
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>
>
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 21 Oct 2008 17:43:51 +0100
> From: "Chen" <address@hidden>
> Subject: RE: [Paparazzi-devel] servos on reacting on the tiny 1.1
> To: <address@hidden>
> Message-ID: <address@hidden>
> Content-Type: text/plain;     charset="us-ascii"
>
> Hi there
>
>  Thanks for the advice, I will have a double check again
>
>
> Thanks
>
>                                             Chen
>
> -----Original Message-----
> From: address@hidden
> [mailto:address@hidden On

> Behalf Of Pascal Brisset
> Sent: Tuesday, October 21, 2008 5:35 PM
> To: address@hidden
> Subject: Re: [Paparazzi-devel] servos on reacting on the tiny 1.1
>
> Hi,
>
> the values sent to the servos can be displayed with the ACTUATORS 
> message. This message is not sent by default. To get it, you have to 
> set the telemetry mode of the fbw process in "debug" mode. Two 
> solutions:
> - Add the telemetry_mode_Fbw variable to your settings file (similar 
> to the telemetry_mode_Ap entry in tuning.xml file), and set the 
> variable to
> 1 (through the GCS) while the board is running
> - Just add
>
> ap.CFLAGS += -DTELEMETRY_MODE_FBW=1
>
> to the makefile section of the airframe file.
>
> If these values are correct, then you will probably have to check the 
> signal with a scope ...
>
> --Pascal
>
>
>
> C Kuo wrote:
>> hi guys
>>
>>  i have currently playing around tiny 1.1 upto just before the test
> flight, and
>> have some problem with the servos and speed controller (they simply 
>> do get
> any
>> signal)
>>
>>  I have test every link on the ground, wireless link is ok, gps is 
>> ok,
> even on
>> the GCS, when i change my throttle level on my r/c controller, it 
>> shows on
> the
>> GCS as well, but some how, the servos just don't react.
>>
>> here is my airframe file on the setting
>>
>> <airframe name="FunJetmm Tiny 1.1">
>>
>> <!-- commands section -->
>>  <servos>
>>    <servo name="THROTTLE"      no="0" min="1550" neutral="1550"
> max="1900"/>
>>    <servo name="AILEVON_LEFT"  no="2" min="1100" neutral="1504"
> max="1900"/>
>>    <servo name="AILEVON_RIGHT" no="1" min="1900" neutral="1495"
> max="1100"/>
>>  </servos>
>>
>>  <commands>
>>    <axis name="THROTTLE" failsafe_value="0"/>
>>    <axis name="ROLL"     failsafe_value="0"/>
>>    <axis name="PITCH"    failsafe_value="0"/>
>> </commands>
>>
>>  <rc_commands>
>>    <set command="THROTTLE" value="@THROTTLE"/>
>>    <set command="ROLL"     value="@ROLL"/>
>>    <set command="PITCH"    value="@PITCH"/>
>> </rc_commands>
>>
>>  <section name="MIXER">
>>    <define name="AILEVON_AILERON_RATE" value="-0.45"/>
>>    <define name="AILEVON_ELEVATOR_RATE" value="0.8"/>  </section>
>>
>> command_laws>
>>    <let var="aileron"  value="@ROLL  * AILEVON_AILERON_RATE"/>
>>    <let var="elevator" value="@PITCH * AILEVON_ELEVATOR_RATE"/>
>>    <set servo="THROTTLE"      value="@THROTTLE"/>
>>    <set servo="AILEVON_LEFT"  value="$elevator + $aileron"/>
>>    <set servo="AILEVON_RIGHT" value="$elevator - $aileron"/>  
>> </command_laws> ...etc
>> makefile>
>> include $(PAPARAZZI_SRC)/conf/autopilot/tiny.makefile
>>
>> FLASH_MODE=IAP
>>
>> ap.CFLAGS +=  -DFBW -DAP -DCONFIG=\"tiny_1_1.h\" -DLED -DTIME_LED=1 
>> ap.srcs = sys_time.c $(SRC_ARCH)/sys_time_hw.c $(SRC_ARCH)/armVIC.c
> main_fbw.c
>> main_ap.c main.c
>>
>> ap.srcs += commands.c
>>
>> ap.CFLAGS += -DACTUATORS=\"servos_4015_MAT_hw.h\" -DSERVOS_4015_MAT 
>> ap.srcs += $(SRC_ARCH)/servos_4015_MAT_hw.c actuators.c
>>
>>
>> and following is my r/c file
>>
>>
>> <!DOCTYPE radio SYSTEM "radio.dtd">
>> <radio name="Futaba T6EXAP" data_min="900" data_max="2100" sync_min
> ="5000"
>> sync_max ="15000">
>> <channel ctl="right_stick_horiz" function="ROLL"     max="1074"
> neutral="1520"
>> min="1942" average="0"/>
>> <channel ctl="right_stick_vert" function="PITCH"    min="1109"
> neutral="1521"
>> max="1938" average="0"/>
>> <channel ctl="left_stick_vert" function="THROTTLE" min="1107"
> neutral="1107"
>> max="1933" average="0"/>
>> <channel ctl="left_stick_horiz" function="YAW"      min="1937"
> neutral="1524"
>> max="1103" average="0"/>
>> <channel ctl="switch_L" function="GAIN1"     min="1100"  
>> neutral="1500"
>> max="3000" average="1"/>
>> <channel ctl="switch_R" function="MODE"    min="1100" neutral="1500"
> max="1900"
>> average="1"/>
>> </radio>
>>
>>
>>
>>  Does any one have any idea?
>>
>> Thanks
>>
>>
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>
>
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>
>
>
>
> ------------------------------
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>
> End of Paparazzi-devel Digest, Vol 55, Issue 32
> ***********************************************
>



_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel