paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Possible FTDI Fixes (Felix)


From: Stephen L Hulme
Subject: Re: [Paparazzi-devel] Possible FTDI Fixes (Felix)
Date: Tue, 12 Jan 2010 07:21:55 +1300

Dear Felix
 
Thank you, I will give it a shot.
 
Regards
 
Stephen
 
Felix Ruess wrote, on  Mon, 11 Jan 2010 09:56:51 +0100
 
Hi Stephen,

I currently don't have a joystick here (and never tested it before),
but do give it a try:
Just start the sim with the additional joystick option, something like this:

LD_LIBRARY_PATH=/opt/jsbsim/lib ./var/BOOZ2_A1/sim/simsitl --js_dev
/dev/input/js0

Depending on your joystick it might be mapped to some different device
(check with dmesg) or have a look in /dev/input/by-id/<your-joystick>

Regards, Felix

On Mon, Jan 11, 2010 at 4:31 AM, Stephen L Hulme <address@hidden> wrote:
> Dear Felix
>
> Thank you very much for your response.
>
> Unfortunately I am no wiser after much file searching
> and premature balding.
>
> Is there any chance of a 'HOW TO', much like the one
> already posted in the Booz section of the WikiÂfor the
> --js_dev <joystick device>?
>
> Regards
>
> Stephen
>
>
> Felix Ruess, wrote on Mon, 11 Jan 2010 00:04:41 +0100
>
> Hi Stephen,
>
> currently the booz sim does not use the flight plans but rc_scripts as
> control inputs. That is convenient for testing control and filters.
> You can also control it by joystick using the --js_dev <joystick
> device> option of the simulator.
>
> Cheers, Felix
>
> On Sun, Jan 10, 2010 at 8:59 AM, Stephen L Hulme <address@hidden> wrote:
>> Dear Felix
>>
>> I have no problems compiling: "make AIRCRAFT=BOOZ2_A1 clean_ac sim" as
>> detailed here:
>> http://paparazzi.enac.fr/wiki/Booz&#xC2; and following the instructions to
>> view
>> the tuning changes in flightgear.
>>
>> Noticeably, the instruction set works well when the flight plan for
>> /sw/conf/conf.xml/~BOOZ2_A1Ãis dummy.xml.
>>
>> And yet I now see the default flight plan setting is booz_test_2.xml for
>> AC:
>> BOOZ2_A1.
>>
>> Can I run thisÃflight plan conf set up in flightgear with a joystick
>> ifÃcertain instruction parameters are changed?
>>
>> Regards
>>
>> Stephen
>>
>>
>>
>>
>> Felix Ruess wrote: Sat, 9 Jan 2010 17:36:58 +0100
>>
>> Hi Mohammed,
>>
>> seems like the signal definitions are not found. I included signal.h
>> in nps_main.c wich was missing (strangely it still worked for me).
>> Please do a svn update to get the latest code and let me know if it works.
>>
>> Cheers, Felix
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

reply via email to

[Prev in Thread] Current Thread [Next in Thread]