paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] POI Camera Tracking?


From: Joseph Metz
Subject: Re: [Paparazzi-devel] POI Camera Tracking?
Date: Fri, 7 May 2010 09:08:38 +0200

Thanks Martin,

i will test it in some days :)

Regards,
Joseph
----- Original Message ----- From: "Martin Mueller" <address@hidden>
To: <address@hidden>
Sent: Friday, May 07, 2010 7:05 AM
Subject: Re: [Paparazzi-devel] POI Camera Tracking?


Hallo Joseph,

the code is in sw/airborne/point.c. It was used in some other planes than the Twinstar, e.g. the Slicer. Just search for point.c in the airframes directory.

You have to set the servo range in the servos CAM_PAN/_TILT and the corresponding angles in the CAM PAN_* and TILT_* section. It needs some documentation...

Martin

Joseph Metz wrote:
Hi Guys,

my twinstar performs very well and i did about 100 flights in the last 3 weeks. Now i want to put a FPV camera on it with a 2 axis gimbal which is always used for fpv flights like that: http://www.fpvsystems.com/images/Videotx/CCDKiller%20Pan&Tilt.jpg

But i do not want to use a headtracker for turnig the servos but the paparazzi board (TWOG). Martin Müller did almost the same some years ago: http://www.youtube.com/watch?v=QAL2Tgkyk2U

The camera should point always to the point of interest (POI) which is a waypoint in the flightplan file. Did anyone exept matin müller realized this or did someone know where i can find the code? Some small modification is not the problem but i´m not the best programmer so it would be a problem to code all by myself.

Thank you,
Joseph




_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel



_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel





reply via email to

[Prev in Thread] Current Thread [Next in Thread]