|
From: | Adam Spence |
Subject: | Re: [Paparazzi-devel] spectrum |
Date: | Mon, 17 May 2010 12:52:44 -0500 |
Hello Eidanm
The code for using spektrum receivers is in the svn tree and will work
an any supported paparazzi architecture ( including TWOG)
One problem with TWOG or other LPC2148 based autopilots is the
availability of only two UARTS ( serial port ) which are usually
occupied by the GPS and the radio modem ( xbee )
There is the possibility of writting code to implement a software UART
but that would have the drawback of putting quite a load on the
processor ( spektrum rx talk at 115200 baud).
Another possibility would be to use a UART/SPI converter
Regards
Poine
2010/5/17 עידן מנדלסון <address@hidden>:
> _______________________________________________> hi Friends
>
> i was wandering did any one tried to use the spectrum satellite receiver on
> the twog circuits?
>
> if same one did i would be very happy to learn about it
>
> thanks happy fighting
>
> eidan
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>
_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
[Prev in Thread] | Current Thread | [Next in Thread] |