paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Paparazzi-devel] Reply to: "FMA direct IR sensor adjustmant (Roman Niki


From: Chris
Subject: [Paparazzi-devel] Reply to: "FMA direct IR sensor adjustmant (Roman Nikitin)"
Date: Thu, 10 Mar 2011 19:36:35 +0200
User-agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.2.14) Gecko/20110223 Thunderbird/3.1.8

Hi.
Check to see if the gain is 1000 as was in mine.
My sensors had 500Kohm and 500Ohm resistors for a gain of 1000 right from the factory. Having said that i did played with gain a lot and finally i used a gain of 800 because of saturation problems here in Greece but i bet you will not have this problem in UK.
I have used any resistor i found from 1/4w size to 602 smd with no problems.
Chris




reply via email to

[Prev in Thread] Current Thread [Next in Thread]