Hi there, We keep getting blank screens on our GCS, it seems to be a common problem so we have seen some suggestions, most of them from Felix,
Here they are: - Udev Rules Copied (Checked) - Cables (Checked via Range test on X-CTU witch is working proprerly with the same cables and almost the same settings - the only difference is that we have to set our ATCI in 12 for test purpose)
- Settings (Pan ID are the same and everything else seems to be correct and were double checked already) - Baundrates (the same for both 57600.)
So the 2 things that are not 100% checked cause we don´t know excty how to check are: Airframe File (I will send it with this email in case anyone want to take a look) Ground Modem Recognition by our PC (I don´t know how to perform this test - it mighty be a good advice already if anyone explain how can I do it)
Paparazzi Center Configuration: Airframe File attached Flight Plan -> flight_plan/basic.xml (no modifications)
Settings -> settings/lisa.xml (no modifications) settings/tuning_basic_ins.xml (no modifications) Radio -> radios/cockpitSX.xml (no modifications) Telemetry -> telemetry/default_fixedwing_imu.xml (no modifications)