paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] ZIGBEE not working


From: Chris Gough
Subject: Re: [Paparazzi-devel] ZIGBEE not working
Date: Mon, 22 Aug 2011 15:13:29 +1000

that page says "Do NOT try this configuration on your XBee , if they
are not modem type : XB24-B. Else , you will just get one bricked
XBee".

What model XBees do you have?

Chris Gough



On Mon, Aug 22, 2011 at 3:03 PM, Bharath S M <address@hidden> wrote:
> I reffered to this link http://sites.google.com/site/xbeetutorial/example
>
> bharath
>
> On Mon, Aug 22, 2011 at 12:00 PM, Bharath S M <address@hidden>
> wrote:
>>
>> ???>>> i used a ppz uav utility board also i used arduino without Ic in
>> it.
>>
>> bharath
>>
>>
>> On Mon, Aug 22, 2011 at 11:48 AM, Chris Gough
>> <address@hidden> wrote:
>>>
>>> Sorry, I don't know which thread you are referring to (I only see a
>>> couple of emails from you).
>>>
>>> If I understand you correctly, you have a setup like this:
>>>
>>>   arduino -> xbee -> xbee -> ??? -> PC serial window (ubuntu).
>>>
>>> does it work if you replace the two xbees with a cable? Are you sure
>>> you havn't bricked it?
>>>
>>> Chris Gough
>>>
>>>
>>>
>>> On Mon, Aug 22, 2011 at 2:22 PM, Bharath S M <address@hidden>
>>> wrote:
>>> > Hi Chris
>>> >
>>> >      No i didn try as its mentioned in thread. I used the pair of
>>> > zigbees to
>>> > transmit serial data which was coming out of my arduino board and
>>> > display on
>>> > the computer serial window, which was not happening
>>> >
>>> > regards
>>> > bharath
>>> >
>>> > On Mon, Aug 22, 2011 at 10:54 AM, Chris Gough
>>> > <address@hidden> wrote:
>>> >>
>>> >> Hi Bharth,
>>> >>
>>> >> Sometimes, if you have a bad wire / soldier joint between your xbee
>>> >> and autopilot (or if you unplug it when it's running), you can "brick"
>>>
>>> >> an xbee. This is quite easy to do, and it's not terminal. Have you
>>> >> tried this?
>>> >>
>>> >>
>>> >>
>>> >> http://paparazzi.enac.fr/wiki/XBee_configuration#Reviving_a_non-responding_Xbee_Pro
>>> >>
>>> >> Chris Gough
>>> >>
>>> >>
>>> >>
>>> >>
>>> >>
>>> >> On Mon, Aug 22, 2011 at 1:10 PM, Bharath S M <address@hidden>
>>> >> wrote:
>>> >> > Hi
>>> >> >
>>> >> >     Actually our team got a auto pilot tiny module v2.11 package
>>> >> > from
>>> >> > PPZUAV
>>> >> > team, now one among the pair of zigbees is not working. So can u
>>> >> > people
>>> >> > get
>>> >> > it replaced? Or is there any way to get it fixed?
>>> >> >
>>> >> > Regards
>>> >> > Bharth SM
>>> >> >
>>> >> > _______________________________________________
>>> >> > Paparazzi-devel mailing list
>>> >> > address@hidden
>>> >> > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>> >> >
>>> >> >
>>> >>
>>> >>
>>> >>
>>> >> --
>>> >> .
>>> >>
>>> >> _______________________________________________
>>> >> Paparazzi-devel mailing list
>>> >> address@hidden
>>> >> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>> >
>>> >
>>> > _______________________________________________
>>> > Paparazzi-devel mailing list
>>> > address@hidden
>>> > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>> >
>>> >
>>>
>>>
>>>
>>> --
>>> .
>>>
>>> _______________________________________________
>>> Paparazzi-devel mailing list
>>> address@hidden
>>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>



-- 
.



reply via email to

[Prev in Thread] Current Thread [Next in Thread]