Re: [Paparazzi-devel] ZIGBEE not working

[Chris Gough]

OK, well if it is defective you should contact PPZ UAV to discuss your
options, however I really think you should try the "unbricking"
procedure yourself first.

Chris Gough

On Mon, Aug 22, 2011 at 3:17 PM, Bharath S M <address@hidden> wrote:
> xb24-z and xbp24-b
>
> bharath
>
>
> On Mon, Aug 22, 2011 at 12:13 PM, Chris Gough
> <address@hidden> wrote:
>>
>> that page says "Do NOT try this configuration on your XBee , if they
>> are not modem type : XB24-B. Else , you will just get one bricked
>> XBee".
>>
>> What model XBees do you have?
>>
>> Chris Gough
>>
>>
>>
>> On Mon, Aug 22, 2011 at 3:03 PM, Bharath S M <address@hidden>
>> wrote:
>> > I reffered to this link
>> > http://sites.google.com/site/xbeetutorial/example
>> >
>> > bharath
>> >
>> > On Mon, Aug 22, 2011 at 12:00 PM, Bharath S M <address@hidden>
>> > wrote:
>> >>
>> >> ???>>> i used a ppz uav utility board also i used arduino without Ic in
>> >> it.
>> >>
>> >> bharath
>> >>
>> >>
>> >> On Mon, Aug 22, 2011 at 11:48 AM, Chris Gough
>> >> <address@hidden> wrote:
>> >>>
>> >>> Sorry, I don't know which thread you are referring to (I only see a
>> >>> couple of emails from you).
>> >>>
>> >>> If I understand you correctly, you have a setup like this:
>> >>>
>> >>>   arduino -> xbee -> xbee -> ??? -> PC serial window (ubuntu).
>> >>>
>> >>> does it work if you replace the two xbees with a cable? Are you sure
>> >>> you havn't bricked it?
>> >>>
>> >>> Chris Gough
>> >>>
>> >>>
>> >>>
>> >>> On Mon, Aug 22, 2011 at 2:22 PM, Bharath S M <address@hidden>
>> >>> wrote:
>> >>> > Hi Chris
>> >>> >
>> >>> >      No i didn try as its mentioned in thread. I used the pair of
>> >>> > zigbees to
>> >>> > transmit serial data which was coming out of my arduino board and
>> >>> > display on
>> >>> > the computer serial window, which was not happening
>> >>> >
>> >>> > regards
>> >>> > bharath
>> >>> >
>> >>> > On Mon, Aug 22, 2011 at 10:54 AM, Chris Gough
>> >>> > <address@hidden> wrote:
>> >>> >>
>> >>> >> Hi Bharth,
>> >>> >>
>> >>> >> Sometimes, if you have a bad wire / soldier joint between your xbee
>> >>> >> and autopilot (or if you unplug it when it's running), you can
>> >>> >> "brick"
>> >>>
>> >>> >> an xbee. This is quite easy to do, and it's not terminal. Have you
>> >>> >> tried this?
>> >>> >>
>> >>> >>
>> >>> >>
>> >>> >>
>> >>> >> http://paparazzi.enac.fr/wiki/XBee_configuration#Reviving_a_non-responding_Xbee_Pro
>> >>> >>
>> >>> >> Chris Gough
>> >>> >>
>> >>> >>
>> >>> >>
>> >>> >>
>> >>> >>
>> >>> >> On Mon, Aug 22, 2011 at 1:10 PM, Bharath S M
>> >>> >> <address@hidden>
>> >>> >> wrote:
>> >>> >> > Hi
>> >>> >> >
>> >>> >> >     Actually our team got a auto pilot tiny module v2.11 package
>> >>> >> > from
>> >>> >> > PPZUAV
>> >>> >> > team, now one among the pair of zigbees is not working. So can u
>> >>> >> > people
>> >>> >> > get
>> >>> >> > it replaced? Or is there any way to get it fixed?
>> >>> >> >
>> >>> >> > Regards
>> >>> >> > Bharth SM
>> >>> >> >
>> >>> >> > _______________________________________________
>> >>> >> > Paparazzi-devel mailing list
>> >>> >> > address@hidden
>> >>> >> > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> >>> >> >
>> >>> >> >
>> >>> >>
>> >>> >>
>> >>> >>
>> >>> >> --
>> >>> >> .
>> >>> >>
>> >>> >> _______________________________________________
>> >>> >> Paparazzi-devel mailing list
>> >>> >> address@hidden
>> >>> >> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> >>> >
>> >>> >
>> >>> > _______________________________________________
>> >>> > Paparazzi-devel mailing list
>> >>> > address@hidden
>> >>> > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> >>> >
>> >>> >
>> >>>
>> >>>
>> >>>
>> >>> --
>> >>> .
>> >>>
>> >>> _______________________________________________
>> >>> Paparazzi-devel mailing list
>> >>> address@hidden
>> >>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> >>
>> >
>> >
>> > _______________________________________________
>> > Paparazzi-devel mailing list
>> > address@hidden
>> > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> >
>> >
>>
>>
>>
>> --
>> .
>>
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>



-- 
.