There was voltage to both rd and tx. Perhaps its broken... thanks for the opinion tho I tried four platforms with ucenter and called unlock so i thought it might be broken...
On Aug 24, 2011 4:29 PM, "Chris Gough" <
address@hidden> wrote:
> I've never seen that before, perhaps it is broken.
>
> It's a long shot, but the plug on those gs407's is not ideal, are you
> sure the connection is physically sound? maybe a fault on the RX line
> could cause the behavior you described.
>
> Chris Gough
>
>
> On Thu, Aug 25, 2011 at 4:15 AM, Joseph Wagster <
address@hidden> wrote:
>> I tried using windows xp today (still v6.20 couldn't get 6.02) It still
>> didn't work. Auto baudrate seemed to be all over the place. It randomly had
>> connection at different baudeates. It wouldn't have my settings after saving
>> and cycling power. I called unlock but their guy kept saying to make sure we
>> saved the config. After I made it apparent I had done that he said to make
>> sure success is shown under ack, but I never get success or failure.
>>
>> Thank you,
>> Joey
>>
>> On Aug 23, 2011 9:09 PM, "Joseph Wagster" <
address@hidden> wrote:
>>> Im dual booting. It didn't work on maverick. It didn't seem to work on my
>>> windows 7 either. Maybe ill give a virtual xp as well.
>>>
>>> Thank you,
>>> Joey
>>> On Aug 23, 2011 7:10 PM, "Chris Gough" <
address@hidden>
>>> wrote:
>>>> Hi Joey,
>>>>
>>>> Are you trying to use u-center via wine? I had no joy from that
>>>> (u-center ~v6.02 I think, debian squeeze), but XP on a VirtualBox
>>>> works fine for me.
>>>>
>>>> Chris Gough
>>>>
>>>> On Wed, Aug 24, 2011 at 10:08 AM, Joseph Wagster <
address@hidden>
>>> wrote:
>>>>> Hello,
>>>>>
>>>>> Im working on maverick with the Lisa/l and can't seem to get gps
>>>>> working.
>>> I
>>>>> tried u- center but got no signal. It seemed similar to configuring the
>>>>> modems but I cant tell whats wrong. I followed the steps on the wiki and
>>>>> used a ftdi for tx and rx to usb. I used the autopilot as a power source
>>> and
>>>>> the gs407 helical gps antenna from sparkfun. Also the manual didn't help
>>> for
>>>>> ucenter. I checked continuity and don't know what's wrong. The baudrate
>>> is
>>>>> the same as the airframe file.
>>>>>
>>>>> Thank you,
>>>>> Joey
>>>>>
>>>>> _______________________________________________
>>>>> Paparazzi-devel mailing list
>>>>>
address@hidden>>>>>
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>>>>
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> .
>>>>
>>>> _______________________________________________
>>>> Paparazzi-devel mailing list
>>>>
address@hidden>>>>
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>
>> _______________________________________________
>> Paparazzi-devel mailing list
>>
address@hidden>>
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>
>>
>
>
>
> --
> .
>
> _______________________________________________
> Paparazzi-devel mailing list
>
address@hidden
>
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel