[Paparazzi-devel] voltage indication bug in GCS ?

[Chris]

Hi.
I recall that this has come up in the past but it looks like it likes 
our company.
In simulation the GCS voltage indication displays 7.3v but the battery 
voltage is set to 33.6v
inside the airframe.
Relevant airframe configuration follows:

IN "BAT" SECTION:
<define name="CATASTROPHIC_BAT_LEVEL"            value="24" unit="V"/>
 <define name="CRITIC_BAT_LEVEL"                value="27" unit="V"/>
<define name="LOW_BAT_LEVEL"                value="28" unit="V"/>
<define name="MAX_BAT_LEVEL"                value="33.6" unit="V"/>

IN "V_CTL" SECTION:
<define name="POWER_CTL_BAT_NOMINAL" value="29.6" unit="volt"/>

Chris