paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Could not find STM32 device


From: Piotr Esden-Tempski
Subject: Re: [Paparazzi-devel] Could not find STM32 device
Date: Fri, 25 Jul 2014 13:43:06 -0700

My bad!

https://github.com/paparazzi/paparazzi/pull/778

I thought I sent the pull request before. :( I just use BMPM too much... :/

I hope this fixes it.

Cheers,
Piotr

On Jul 25, 2014, at 13:39, John Voegeli <address@hidden> wrote:

> Piotr that is what I get as well. The udev rule looks like this (default
> from vanilla version of Paparazzi):
> 
> ATTR{manufacturer}=="Transition Robotics Inc.", ATTR{product}=="Lisa/M
> (Upgrade)*", GROUP=³plugdev"
> 
> Should it be different to match? I am not very good with udev rules.
> 
> 
> 
> On 7/25/14, 4:25 PM, "Piotr Esden-Tempski" <address@hidden> wrote:
> 
>> Just to make sure this is the output I am getting connecting a Lisa/M:
>> 
>> $ sudo lsusb -v
>> [snip]
>> Bus 003 Device 002: ID 1d50:600f OpenMoko, Inc.
>> Device Descriptor:
>> bLength 18
>> bDescriptorType 1
>> bcdUSB 2.00
>> bDeviceClass 0 (Defined at Interface level)
>> bDeviceSubClass 0
>> bDeviceProtocol 0
>> bMaxPacketSize0 64
>> idVendor 0x1d50 OpenMoko, Inc.
>> idProduct 0x600f
>> bcdDevice 1.00
>> iManufacturer 1 1 BIT SQUARED
>> iProduct 2 Lisa/M V2.1 (Upgrade) V1.1
>> iSerial 3 LM21005 35FFDC053256383336622143
>> bNumConfigurations 1
>> Configuration Descriptor:
>> bLength 9
>> bDescriptorType 2
>> wTotalLength 27
>> bNumInterfaces 1
>> bConfigurationValue 1
>> iConfiguration 0
>> bmAttributes 0xc0
>> Self Powered
>> MaxPower 100mA
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 0
>> bAlternateSetting 0
>> bNumEndpoints 0
>> bInterfaceClass 254 Application Specific Interface
>> bInterfaceSubClass 1 Device Firmware Update
>> bInterfaceProtocol 2
>> iInterface 4 @Internal Flash /0x08000000/4*002Ka,124*002Kg
>> Device Firmware Upgrade Interface Descriptor:
>> bLength 9
>> bDescriptorType 33
>> bmAttributes 9
>> Will Detach
>> Manifestation Intolerant
>> Upload Unsupported
>> Download Supported
>> wDetachTimeout 255 milliseconds
>> wTransferSize 2048 bytes
>> bcdDFUVersion 1.1a
>> Device Status: 0x0000
>> (Bus Powered)
>> [snip]
>> 
>> OpenMoko is correct. We are using the free device IDs generously
>> provided by OpenMoko.
>> 
>> Cheers,
>> Piotr
>> 
>> On 07/25/2014 12:47 PM, John Voegeli wrote:
>>> Yes Felix I sure do. I originally has a bad cable causing it not to
>>> power correctly, but since then it does the cylon flashing pattern
>>> when plugged in USB.
>>> 
>>> 
>>> Sent from my iPhone
>>> 
>>> On Jul 25, 2014, at 15:42, "Felix Ruess" <address@hidden
>>> <mailto:address@hidden>> wrote:
>>> 
>>>> Hi,
>>>> 
>>>> the board does not seem to be in bootloader mode, it should show up
>>>> as Lisa/M
>>>> Do you see the LEDs flashing like this
>>>> https://wiki.paparazziuav.org/wiki/Lisa/M_v2.0#Using_luftboot ?
>>>> 
>>>> Cheers, Felix
>>>> 
>>>> 
>>>> On Fri, Jul 25, 2014 at 5:52 PM, John Voegeli <address@hidden
>>>> <mailto:address@hidden>> wrote:
>>>> 
>>>>    Does not work with sudo either. Tried that last night I thought
>>>>    maybe a permissions issues as well. It just says it cannot find it.
>>>> 
>>>>    From: AFISH <address@hidden
>>>>    <mailto:address@hidden>>
>>>>    Reply-To: Paparazzi UAV devel list <address@hidden
>>>>    <mailto:address@hidden>>
>>>>    Date: Friday, July 25, 2014 at 11:47 AM
>>>>    To: Paparazzi UAV devel list <address@hidden
>>>>    <mailto:address@hidden>>
>>>>    Cc: Paparazzi UAV devel list <address@hidden
>>>>    <mailto:address@hidden>>
>>>> 
>>>>    Subject: Re: [Paparazzi-devel] Could not find STM32 device
>>>> 
>>>>    Try to run sudo ./paparazzi, if you get link established, it will
>>>>    shows you need add to some group
>>>>    ‹
>>>>    Sent from Mailbox <https://www.dropbox.com/mailbox> for iPhone
>>>> 
>>>> 
>>>>    On Fri, Jul 25, 2014 at 10:16 AM, John Voegeli
>>>>    <address@hidden <mailto:address@hidden>> wrote:
>>>> 
>>>>        Yes I have permission I followed those steps... Here is the
>>>>        output for the device that shows up when plugging in the Lisa
>>>>        M to USB.
>>>> 
>>>>        Bus 002 Device 003: ID 1d50:600f OpenMoko, Inc.
>>>>        Couldn't open device, some information will be missing
>>>>        Device Descriptor:
>>>>        bLength 18
>>>>        bDescriptorType 1
>>>>        bcdUSB 2.00
>>>>        bDeviceClass 0 (Defined at Interface level)
>>>>        bDeviceSubClass 0
>>>>        bDeviceProtocol 0
>>>>        bMaxPacketSize0 64
>>>>        idVendor 0x1d50 OpenMoko, Inc.
>>>>        idProduct 0x600f
>>>>        bcdDevice 1.00
>>>>        iManufacturer 1
>>>>        iProduct 2
>>>>        iSerial 3
>>>>        bNumConfigurations 1
>>>>        Configuration Descriptor:
>>>>        bLength 9
>>>>        bDescriptorType 2
>>>>        wTotalLength 27
>>>>        bNumInterfaces 1
>>>>        bConfigurationValue 1
>>>>        iConfiguration 0
>>>>        bmAttributes 0xc0
>>>>        Self Powered
>>>>        MaxPower 100mA
>>>>        Interface Descriptor:
>>>>        bLength 9
>>>>        bDescriptorType 4
>>>>        bInterfaceNumber 0
>>>>        bAlternateSetting 0
>>>>        bNumEndpoints 0
>>>>        bInterfaceClass 254 Application Specific Interface
>>>>        bInterfaceSubClass 1 Device Firmware Update
>>>>        bInterfaceProtocol 2
>>>>        iInterface 4
>>>>        Device Firmware Upgrade Interface Descriptor:
>>>>        bLength 9
>>>>        bDescriptorType 33
>>>>        bmAttributes 9
>>>>        Will Detach
>>>>        Manifestation Intolerant
>>>>        Upload Unsupported
>>>>        Download Supported
>>>>        wDetachTimeout 255 milliseconds
>>>>        wTransferSize 2048 bytes
>>>>        bcdDFUVersion 1.1a
>>>> 
>>>> 
>>>>        ________________________________________
>>>>        From:
>>>>        address@hidden
>>>> 
>>>> <mailto:address@hidden>
>>>>        <address@hidden
>>>> 
>>>> <mailto:address@hidden>>
>>>>        on behalf of Piotr Esden-Tempski <address@hidden
>>>>        <mailto:address@hidden>>
>>>>        Sent: Friday, July 25, 2014 3:18 AM
>>>>        To: Paparazzi UAV devel list
>>>>        Subject: Re: [Paparazzi-devel] Could not find STM32 device
>>>> 
>>>>        Hi John,
>>>> 
>>>>        Do you have permissions to access the DFU device?
>>>> 
>>>>        http://wiki.paparazziuav.org/wiki/Installation/Linux#Udev_rules
>>>> 
>>>>        If you run lsusb -v is the Lisa/M listed?
>>>> 
>>>>        Cheers,
>>>>        Piotr
>>>> 
>>>>        On Jul 24, 2014, at 20:57, John Voegeli
>>>>        <address@hidden <mailto:address@hidden>> wrote:
>>>> 
>>>>> Hey all,
>>>>> 
>>>>> Sorry if this has been answered before. I googled and
>>>>        searched all over the site and could not find anything. I
>>>>        have the new Lisa M 2.1 and I am trying to flash it however I
>>>>        keep getting Could not find STM32 (autopilot) device Failed
>>>>        messages. I have tried everything and am at a loss. Any
>>>>        suggestions?
>>>>> _______________________________________________
>>>>> Paparazzi-devel mailing list
>>>>> address@hidden
>>>> <mailto:address@hidden>
>>>>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>>> 
>>>> 
>>>>        _______________________________________________
>>>>        Paparazzi-devel mailing list
>>>>        address@hidden <mailto:address@hidden>
>>>>        https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>>> 
>>>>        _______________________________________________
>>>>        Paparazzi-devel mailing list
>>>>        address@hidden <mailto:address@hidden>
>>>>        https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>>> 
>>>> 
>>>> 
>>>>    _______________________________________________
>>>>    Paparazzi-devel mailing list
>>>>    address@hidden <mailto:address@hidden>
>>>>    https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>>> 
>>>> 
>>>> _______________________________________________
>>>> Paparazzi-devel mailing list
>>>> address@hidden <mailto:address@hidden>
>>>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>> 
>>> 
>>> _______________________________________________
>>> Paparazzi-devel mailing list
>>> address@hidden
>>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> 
>> 
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> 
> 
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel




reply via email to

[Prev in Thread] Current Thread [Next in Thread]