Re: [Paparazzi-devel] Regulate Voltage for Camera Capture

[Felix Ruess]

As Christophe pointed out, you should take a look at the digital_cam module.
http://docs.paparazziuav.org/latest/module__digital_cam.html

Load the module and define the gpios you want to use, e.g. as in conf/airframes/examples/funjet_cam.xml

On Fri, Nov 21, 2014 at 11:13 AM, Kristofer Von Ahnen <address@hidden> wrote:

Just looking to take photos through a hardware signal sync using the cam pins. Is there anything in the code that needs to be modified for our application after wiring a connection from CAM to our camera apparatus?

~Kris

On 11/21/2014 02:36 AM, Christophe De Wagter wrote:

do you want to pan-tilt the camera  (pan-tilt module)

or do you want to take photos (digital_cam_xxx  with either an IO pin, a servo, uart, i2c ... etc )

-Christophe 

On Thu, Nov 20, 2014 at 6:22 PM, Kristofer Von Ahnen <address@hidden> wrote:

Currently looking into how to send a signal from the TWOG board to a camera via a wired connection. We have come across a pan-tilt camera example in an older version of Paparazzi, but are having difficulties figuring out where the signal originates in the code and how it can be controlled (if it can be). Does anyone know of any documents online regarding how to send this type of signal from the TWOG board, or are there any posted projects online related to this?

Cheers,
~Kris


_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel