paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Using Lisa/S without a RC transmitter


From: Freek van Tienen
Subject: Re: [Paparazzi-devel] Using Lisa/S without a RC transmitter
Date: Mon, 26 Jan 2015 15:02:18 +0000

Hi,

You can define a MFG ID in the USB dongle and in the airframe file. If they are the same they should be able to communicate without a transmitter. I'm not sure how well the uplink works without transmitter.
But I'm developing a simple protocol 1-to-1, so without a transmitter with fast up/down-link. Hoping to finish that this week, and then need to clean it up a lot for adding it to master.

Greetings,
Freek

On Mon Jan 26 2015 at 1:31:11 PM Nicolas Quendez <address@hidden> wrote:

Hi all,

I would like to use Lisa/S without any transmitter. But it seems that the binding between the Lisa/S modem and the USBRF is set during the binding process with a DSM RC transmitter (that I do not have, I use a Hitec Aurora 9 transmitter, but for this application I do not want to use any RC transmitter).

So I need to set the same MFG ID in both Lisa/S and USBRF dongle. Some ideas to do so ?

Thanks in advance
Best regards
Nicolas
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

reply via email to

[Prev in Thread] Current Thread [Next in Thread]