Re: [Paparazzi-devel] MS4525 Airspeed sensor drivers

[Felix Ruess]

See also http://docs.paparazziuav.org/latest/module__airspeed_ms45xx_i2c.html

On Mon, Jun 29, 2015 at 4:43 PM, Eduardo lavratti <address@hidden> wrote:

MS5611 is a barometer

To use MS4525 you need to put this lines in modules section

        <load name="airspeed_ms45xx_i2c.xml">
            <define name="MS45XX_I2C_DEV" value="i2c1"/>
            <define name="MS45XX_PRESSURE_RANGE" value="1"/>
            <define name="MS45XX_OUTPUT_TYPE" value="0"/>
            <define name="MS45XX_PRESSURE_OFFSET" value="8549.0"/>  <!-- 8542.0-->
        </load>

---

Date: Mon, 29 Jun 2015 09:40:46 -0400
From: address@hidden
To: address@hidden
Subject: [Paparazzi-devel] MS4525 Airspeed sensor drivers

I am looking at adding an airspeed sensor to my setup and the Eagle Tree does not seem to be working well (seeing all the comments on the mailing list).

I had a look at the measurement specialty MS4525DO mentioned on the wiki. I cannot find drivers for it in the module section, but I was wondering if I can just use MS5611 drivers instead?

Thanks,

Joseph

_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel