paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] AMSYS AMS 5812 adressing


From: Joseph Muhlhausen
Subject: Re: [Paparazzi-devel] AMSYS AMS 5812 adressing
Date: Thu, 9 Jul 2015 15:32:15 -0400

Got it! Thanks Tobias

On Tue, Jul 7, 2015 at 3:43 AM, Tobias <address@hidden> wrote:
All amsys sensors have the same default address (not sure which one, but the wiki should know!)

so you only need to reprogram the address if you want to connect more than one amsys sensor. and even if you want too, there is is no need to pay for the starter kid, you can request amsys to program it before delivery.
please check but if I m right the amsys baro should work with the default address while the amsys airspeed has a modified one.
If you want to use only the airspeed and the sensor has only the default address, just change the address in the module to the default one and you're fine.

cheers Tobi
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel


reply via email to

[Prev in Thread] Current Thread [Next in Thread]