Re: [Paparazzi-devel] No throttle in fix-wing auto2 mode

[Iman Shirdareh]

Hi Pascal

I think you didn't "Launch" your aircraft!

If you have red color in background of your throttle indicator in GCS strip, click on launch and resurrect buttons.

On Fri, Jul 8, 2016 at 2:15 AM, Pascal Fust <address@hidden> wrote:

Hi,

today I tested my fix-wing setup and found that each time I switched to auto2 mode, it cut immediately the throttle. After switching back to auto1 or manual mode the throttle returned to the corresponding (prior) value again. Any clues, where I should start the search for this behaviour? 

While going through the log files, I see that the PPRZ_MODE returned the following values: 2, 3, 3, 2, 0, 21. What do the different values for ap_gaz affect? What do the values (here 21) for mcu1_status indicate?

Suddenly I ended in PPRZ_MODE 3 (HOME?). I don't know, how I got there, but as a result, throttle was also cut when switching to auto1 mode. Any ideas how this could happen and if the resulting throttle cut is logic in a way?

Thanks for your support.

Pascal 

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel