[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH 7/7] vhost-user: call VHOST_USER_SET_VRING_ENABLE synchronous
From: |
Michael S. Tsirkin |
Subject: |
Re: [PATCH 7/7] vhost-user: call VHOST_USER_SET_VRING_ENABLE synchronously |
Date: |
Mon, 2 Oct 2023 18:36:13 -0400 |
On Mon, Oct 02, 2023 at 05:12:27PM -0400, Stefan Hajnoczi wrote:
> On Mon, 2 Oct 2023 at 02:49, Michael S. Tsirkin <mst@redhat.com> wrote:
> >
> > On Wed, Aug 30, 2023 at 11:37:50AM -0400, Stefan Hajnoczi wrote:
> > > On Wed, 30 Aug 2023 at 09:30, Laszlo Ersek <lersek@redhat.com> wrote:
> > > >
> > > > On 8/30/23 14:10, Stefan Hajnoczi wrote:
> > > > > On Sun, 27 Aug 2023 at 14:31, Laszlo Ersek <lersek@redhat.com> wrote:
> > > > >>
> > > > >> (1) The virtio-1.0 specification
> > > > >> <http://docs.oasis-open.org/virtio/virtio/v1.0/virtio-v1.0.html>
> > > > >> writes:
> > > > >>
> > > > >>> 3 General Initialization And Device Operation
> > > > >>> 3.1 Device Initialization
> > > > >>> 3.1.1 Driver Requirements: Device Initialization
> > > > >>>
> > > > >>> [...]
> > > > >>>
> > > > >>> 7. Perform device-specific setup, including discovery of virtqueues
> > > > >>> for
> > > > >>> the device, optional per-bus setup, reading and possibly writing
> > > > >>> the
> > > > >>> device’s virtio configuration space, and population of
> > > > >>> virtqueues.
> > > > >>>
> > > > >>> 8. Set the DRIVER_OK status bit. At this point the device is “live”.
> > > > >>
> > > > >> and
> > > > >>
> > > > >>> 4 Virtio Transport Options
> > > > >>> 4.1 Virtio Over PCI Bus
> > > > >>> 4.1.4 Virtio Structure PCI Capabilities
> > > > >>> 4.1.4.3 Common configuration structure layout
> > > > >>> 4.1.4.3.2 Driver Requirements: Common configuration structure layout
> > > > >>>
> > > > >>> [...]
> > > > >>>
> > > > >>> The driver MUST configure the other virtqueue fields before
> > > > >>> enabling the
> > > > >>> virtqueue with queue_enable.
> > > > >>>
> > > > >>> [...]
> > > > >>
> > > > >> These together mean that the following sub-sequence of steps is
> > > > >> valid for
> > > > >> a virtio-1.0 guest driver:
> > > > >>
> > > > >> (1.1) set "queue_enable" for the needed queues as the final part of
> > > > >> device
> > > > >> initialization step (7),
> > > > >>
> > > > >> (1.2) set DRIVER_OK in step (8),
> > > > >>
> > > > >> (1.3) immediately start sending virtio requests to the device.
> > > > >>
> > > > >> (2) When vhost-user is enabled, and the
> > > > >> VHOST_USER_F_PROTOCOL_FEATURES
> > > > >> special virtio feature is negotiated, then virtio rings start in
> > > > >> disabled
> > > > >> state, according to
> > > > >> <https://qemu-project.gitlab.io/qemu/interop/vhost-user.html#ring-states>.
> > > > >> In this case, explicit VHOST_USER_SET_VRING_ENABLE messages are
> > > > >> needed for
> > > > >> enabling vrings.
> > > > >>
> > > > >> Therefore setting "queue_enable" from the guest (1.1) is a *control
> > > > >> plane*
> > > > >> operation, which travels from the guest through QEMU to the
> > > > >> vhost-user
> > > > >> backend, using a unix domain socket.
> > > > >>
> > > > >> Whereas sending a virtio request (1.3) is a *data plane* operation,
> > > > >> which
> > > > >> evades QEMU -- it travels from guest to the vhost-user backend via
> > > > >> eventfd.
> > > > >>
> > > > >> This means that steps (1.1) and (1.3) travel through different
> > > > >> channels,
> > > > >> and their relative order can be reversed, as perceived by the
> > > > >> vhost-user
> > > > >> backend.
> > > > >>
> > > > >> That's exactly what happens when OVMF's virtiofs driver
> > > > >> (VirtioFsDxe) runs
> > > > >> against the Rust-language virtiofsd version 1.7.2. (Which uses
> > > > >> version
> > > > >> 0.10.1 of the vhost-user-backend crate, and version 0.8.1 of the
> > > > >> vhost
> > > > >> crate.)
> > > > >>
> > > > >> Namely, when VirtioFsDxe binds a virtiofs device, it goes through the
> > > > >> device initialization steps (i.e., control plane operations), and
> > > > >> immediately sends a FUSE_INIT request too (i.e., performs a data
> > > > >> plane
> > > > >> operation). In the Rust-language virtiofsd, this creates a race
> > > > >> between
> > > > >> two components that run *concurrently*, i.e., in different threads or
> > > > >> processes:
> > > > >>
> > > > >> - Control plane, handling vhost-user protocol messages:
> > > > >>
> > > > >> The "VhostUserSlaveReqHandlerMut::set_vring_enable" method
> > > > >> [crates/vhost-user-backend/src/handler.rs] handles
> > > > >> VHOST_USER_SET_VRING_ENABLE messages, and updates each vring's
> > > > >> "enabled"
> > > > >> flag according to the message processed.
> > > > >>
> > > > >> - Data plane, handling virtio / FUSE requests:
> > > > >>
> > > > >> The "VringEpollHandler::handle_event" method
> > > > >> [crates/vhost-user-backend/src/event_loop.rs] handles the incoming
> > > > >> virtio / FUSE request, consuming the virtio kick at the same time.
> > > > >> If
> > > > >> the vring's "enabled" flag is set, the virtio / FUSE request is
> > > > >> processed genuinely. If the vring's "enabled" flag is clear, then
> > > > >> the
> > > > >> virtio / FUSE request is discarded.
> > > > >
> > > > > Why is virtiofsd monitoring the virtqueue and discarding requests
> > > > > while it's disabled?
> > > >
> > > > That's what the vhost-user spec requires:
> > > >
> > > > https://qemu-project.gitlab.io/qemu/interop/vhost-user.html#ring-states
> > > >
> > > > """
> > > > started but disabled: the back-end must process the ring without causing
> > > > any side effects. For example, for a networking device, in the disabled
> > > > state the back-end must not supply any new RX packets, but must process
> > > > and discard any TX packets.
> > > > """
> > > >
> > > > This state is different from "stopped", where "the back-end must not
> > > > process the ring at all".
> > > >
> > > > The spec also says,
> > > >
> > > > """
> > > > If VHOST_USER_F_PROTOCOL_FEATURES has been negotiated, the ring is
> > > > initialized in a disabled state and is enabled by
> > > > VHOST_USER_SET_VRING_ENABLE with parameter 1.
> > > > """
> > > >
> > > > AFAICT virtiofsd follows this requirement.
> > >
> > > Hi Michael,
> > > You documented the disabled ring state in QEMU commit commit
> > > c61f09ed855b5009f816242ce281fd01586d4646 ("vhost-user: clarify start
> > > and enable") where virtio-net devices discard tx buffers. The disabled
> > > state seems to be specific to vhost-user and not covered in the VIRTIO
> > > specification.
> > >
> > > Do you remember what the purpose of the disabled state was? Why is it
> > > necessary to discard tx buffers instead of postponing ring processing
> > > until the virtqueue is enabled?
> > >
> > > My concern is that the semantics are unclear for virtqueue types that
> > > are different from virtio-net rx/tx. Even the virtio-net controlq
> > > would be problematic - should buffers be silently discarded with
> > > VIRTIO_NET_OK or should they fail?
> > >
> > > Thanks,
> > > Stefan
> >
> > I think I got it now.
> > This weird state happens when linux first queues packets
> > on multiple queues, then changes max queues to 1, queued packets need
> > to still be freed eventually.
>
> Can you explain what is happening in the guest driver, QEMU, and the
> vhost-user-net device in more detail? I don't understand the scenario.
guest changes max vq pairs making it smaller
qemu disables ring
> > Yes, I am not sure this can apply to devices or queue types
> > other than virtio net. Maybe.
> >
> > When we say:
> > must process the ring without causing any side effects.
> > then I think it would be better to say
> > must process the ring if it can be done without causing
> > guest visible side effects.
>
> Completing a tx buffer is guest-visible, so I'm confused by this statement.
yes but it's not immediately guest visible whether packet was
transmitted or discarded.
> > processing rx ring would have a side effect of causing
> > guest to get malformed buffers, so we don't process it.
>
> Why are they malformed? Do you mean the rx buffers are stale (the
> guest driver has changed the number of queues and doesn't expect to
> receive them anymore)?
there's no way to consume an rx buffer without supplying
an rx packet to guest.
> > processing command queue - we can't fail for sure since
> > that is guest visible. but practically we don't do this
> > for cvq.
> >
> > what should happen for virtiofsd? I don't know -
> > I am guessing discarding would have a side effect
> > so should not happen.
> >
> >
> >
> >
> > > >
> > > > > This seems like a bug in the vhost-user backend to me.
> > > >
> > > > I didn't want to exclude that possiblity; that's why I included Eugenio,
> > > > German, Liu Jiang, and Sergio in the CC list.
> > > >
> > > > >
> > > > > When the virtqueue is disabled, don't monitor the kickfd.
> > > > >
> > > > > When the virtqueue transitions from disabled to enabled, the control
> > > > > plane should self-trigger the kickfd so that any available buffers
> > > > > will be processed.
> > > > >
> > > > > QEMU uses this scheme to switch between vhost/IOThreads and built-in
> > > > > virtqueue kick processing.
> > > > >
> > > > > This approach is more robust than relying buffers being enqueued after
> > > > > the virtqueue is enabled.
> > > >
> > > > I'm happy to drop the series if the virtiofsd maintainers agree that the
> > > > bug is in virtiofsd, and can propose a design to fix it. (I do think
> > > > that such a fix would require an architectural change.)
> > > >
> > > > FWIW, my own interpretation of the vhost-user spec (see above) was that
> > > > virtiofsd was right to behave the way it did, and that there was simply
> > > > no way to prevent out-of-order delivery other than synchronizing the
> > > > guest end-to-end with the vhost-user backend, concerning
> > > > VHOST_USER_SET_VRING_ENABLE.
> > > >
> > > > This end-to-end synchronization is present "naturally" in vhost-net,
> > > > where ioctl()s are automatically synchronous -- in fact *all* operations
> > > > on the control plane are synchronous. (Which is just a different way to
> > > > say that the guest is tightly coupled with the control plane.)
> > > >
> > > > Note that there has been at least one race like this before; see commit
> > > > 699f2e535d93 ("vhost: make SET_VRING_ADDR, SET_FEATURES send replies",
> > > > 2021-09-04). Basically every pre-existent call to enforce_reply() is a
> > > > cover-up for the vhost-user spec turning (somewhat recklessly?) most
> > > > operations into async ones.
> > > >
> > > > At some point this became apparent and so the REPLY_ACK flag was
> > > > introduced; see commit ca525ce5618b ("vhost-user: Introduce a new
> > > > protocol feature REPLY_ACK.", 2016-08-10). (That commit doesn't go into
> > > > details, but I'm pretty sure there was a similar race around
> > > > SET_MEM_TABLE!)
> > > >
> > > > BTW even if we drop this series for QEMU, I don't think it will have
> > > > been in vain. The first few patches are cleanups which could be merged
> > > > for their own sake. And the last patch is essentially the proof of the
> > > > problem statement / analysis. It can be considered an elaborate bug
> > > > report for virtiofsd, *if* we decide the bug is in virtiofsd. I did have
> > > > that avenue in mind as well, when writing the commit message / patch.
> > > >
> > > > For now I'm going to post v2 -- that's not to say that I'm dismissing
> > > > your feedback (see above!), just want to get the latest version on-list.
> > > >
> > > > Thanks!
> > > > Laszlo
> > > >
> > > > >
> > > > > Stefan
> > > > >
> > > > >>
> > > > >> Note that OVMF enables the queue *first*, and sends FUSE_INIT
> > > > >> *second*.
> > > > >> However, if the data plane processor in virtiofsd wins the race,
> > > > >> then it
> > > > >> sees the FUSE_INIT *before* the control plane processor took notice
> > > > >> of
> > > > >> VHOST_USER_SET_VRING_ENABLE and green-lit the queue for the data
> > > > >> plane
> > > > >> processor. Therefore the latter drops FUSE_INIT on the floor, and
> > > > >> goes
> > > > >> back to waiting for further virtio / FUSE requests with epoll_wait.
> > > > >> Meanwhile OVMF is stuck waiting for the FUSET_INIT response -- a
> > > > >> deadlock.
> > > > >>
> > > > >> The deadlock is not deterministic. OVMF hangs infrequently during
> > > > >> first
> > > > >> boot. However, OVMF hangs almost certainly during reboots from the
> > > > >> UEFI
> > > > >> shell.
> > > > >>
> > > > >> The race can be "reliably masked" by inserting a very small delay --
> > > > >> a
> > > > >> single debug message -- at the top of
> > > > >> "VringEpollHandler::handle_event",
> > > > >> i.e., just before the data plane processor checks the "enabled"
> > > > >> field of
> > > > >> the vring. That delay suffices for the control plane processor to
> > > > >> act upon
> > > > >> VHOST_USER_SET_VRING_ENABLE.
> > > > >>
> > > > >> We can deterministically prevent the race in QEMU, by blocking OVMF
> > > > >> inside
> > > > >> step (1.1) -- i.e., in the write to the "queue_enable" register --
> > > > >> until
> > > > >> VHOST_USER_SET_VRING_ENABLE actually *completes*. That way OVMF's
> > > > >> VCPU
> > > > >> cannot advance to the FUSE_INIT submission before virtiofsd's control
> > > > >> plane processor takes notice of the queue being enabled.
> > > > >>
> > > > >> Wait for VHOST_USER_SET_VRING_ENABLE completion by:
> > > > >>
> > > > >> - setting the NEED_REPLY flag on VHOST_USER_SET_VRING_ENABLE, and
> > > > >> waiting
> > > > >> for the reply, if the VHOST_USER_PROTOCOL_F_REPLY_ACK vhost-user
> > > > >> feature
> > > > >> has been negotiated, or
> > > > >>
> > > > >> - performing a separate VHOST_USER_GET_FEATURES *exchange*, which
> > > > >> requires
> > > > >> a backend response regardless of VHOST_USER_PROTOCOL_F_REPLY_ACK.
> > > > >>
> > > > >> Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:vhost)
> > > > >> Cc: Eugenio Perez Martin <eperezma@redhat.com>
> > > > >> Cc: German Maglione <gmaglione@redhat.com>
> > > > >> Cc: Liu Jiang <gerry@linux.alibaba.com>
> > > > >> Cc: Sergio Lopez Pascual <slp@redhat.com>
> > > > >> Cc: Stefano Garzarella <sgarzare@redhat.com>
> > > > >> Signed-off-by: Laszlo Ersek <lersek@redhat.com>
> > > > >> ---
> > > > >> hw/virtio/vhost-user.c | 2 +-
> > > > >> 1 file changed, 1 insertion(+), 1 deletion(-)
> > > > >>
> > > > >> diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c
> > > > >> index beb4b832245e..01e0ca90c538 100644
> > > > >> --- a/hw/virtio/vhost-user.c
> > > > >> +++ b/hw/virtio/vhost-user.c
> > > > >> @@ -1235,7 +1235,7 @@ static int vhost_user_set_vring_enable(struct
> > > > >> vhost_dev *dev, int enable)
> > > > >> .num = enable,
> > > > >> };
> > > > >>
> > > > >> - ret = vhost_set_vring(dev, VHOST_USER_SET_VRING_ENABLE,
> > > > >> &state, false);
> > > > >> + ret = vhost_set_vring(dev, VHOST_USER_SET_VRING_ENABLE,
> > > > >> &state, true);
> > > > >> if (ret < 0) {
> > > > >> /*
> > > > >> * Restoring the previous state is likely infeasible,
> > > > >> as well as
> > > > >
> > > >
> >
- Re: [PATCH 7/7] vhost-user: call VHOST_USER_SET_VRING_ENABLE synchronously, (continued)
- Re: [PATCH 7/7] vhost-user: call VHOST_USER_SET_VRING_ENABLE synchronously, Michael S. Tsirkin, 2023/10/02
- Re: [PATCH 7/7] vhost-user: call VHOST_USER_SET_VRING_ENABLE synchronously, Stefan Hajnoczi, 2023/10/02
- Re: [PATCH 7/7] vhost-user: call VHOST_USER_SET_VRING_ENABLE synchronously, Stefan Hajnoczi, 2023/10/02
- Re: [PATCH 7/7] vhost-user: call VHOST_USER_SET_VRING_ENABLE synchronously, Michael S. Tsirkin, 2023/10/03
- Re: [PATCH 7/7] vhost-user: call VHOST_USER_SET_VRING_ENABLE synchronously, Stefan Hajnoczi, 2023/10/03
- Re: [PATCH 7/7] vhost-user: call VHOST_USER_SET_VRING_ENABLE synchronously, Laszlo Ersek, 2023/10/03
- Re: [PATCH 7/7] vhost-user: call VHOST_USER_SET_VRING_ENABLE synchronously, Michael S. Tsirkin, 2023/10/03
- Re: [PATCH 7/7] vhost-user: call VHOST_USER_SET_VRING_ENABLE synchronously, Laszlo Ersek, 2023/10/03
- Re: [PATCH 7/7] vhost-user: call VHOST_USER_SET_VRING_ENABLE synchronously, Michael S. Tsirkin, 2023/10/03
- Re: [PATCH 7/7] vhost-user: call VHOST_USER_SET_VRING_ENABLE synchronously, Stefan Hajnoczi, 2023/10/03
- Re: [PATCH 7/7] vhost-user: call VHOST_USER_SET_VRING_ENABLE synchronously,
Michael S. Tsirkin <=
- Re: [PATCH 7/7] vhost-user: call VHOST_USER_SET_VRING_ENABLE synchronously, Stefan Hajnoczi, 2023/10/02
- Re: [PATCH 7/7] vhost-user: call VHOST_USER_SET_VRING_ENABLE synchronously, Michael S. Tsirkin, 2023/10/03
Re: [PATCH 7/7] vhost-user: call VHOST_USER_SET_VRING_ENABLE synchronously, Michael S. Tsirkin, 2023/10/03