qemu-riscv
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v3 2/7] hw/riscv: split fdt address calculation from fdt load


From: Daniel Henrique Barboza
Subject: [PATCH v3 2/7] hw/riscv: split fdt address calculation from fdt load
Date: Thu, 19 Jan 2023 16:17:23 -0300

A common trend in other archs is to calculate the fdt address, which is
usually straightforward, and then calling a function that loads the
fdt/dtb by using that address.

riscv_load_fdt() is doing a bit too much in comparison. It's calculating
the fdt address via an elaborated heuristic to put the FDT at the bottom
of DRAM, and "bottom of DRAM" will vary across boards and
configurations, then it's actually loading the fdt, and finally it's
returning the fdt address used to the caller.

Reduce the existing complexity of riscv_load_fdt() by splitting its code
into a new function, riscv_compute_fdt_addr(), that will take care of
all fdt address logic. riscv_load_fdt() can then be a simple function
that just loads a fdt at the given fdt address.

We're also taken the opportunity to clarify the intentions and
assumptions made by these functions. riscv_load_fdt() is receiving a
hwaddr as fdt_addr because the Polarfire SoC will have an exclusive
compute fdt address function that can return 64 bit addresses.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
---
 hw/riscv/boot.c            | 33 +++++++++++++++++++++++++--------
 hw/riscv/microchip_pfsoc.c |  6 ++++--
 hw/riscv/sifive_u.c        |  7 ++++---
 hw/riscv/spike.c           |  6 +++---
 hw/riscv/virt.c            |  7 ++++---
 include/hw/riscv/boot.h    |  3 ++-
 6 files changed, 42 insertions(+), 20 deletions(-)

diff --git a/hw/riscv/boot.c b/hw/riscv/boot.c
index dc14d8cd14..13b5ce2d49 100644
--- a/hw/riscv/boot.c
+++ b/hw/riscv/boot.c
@@ -249,9 +249,21 @@ void riscv_load_initrd(MachineState *machine, uint64_t 
kernel_entry)
     }
 }
 
-uint64_t riscv_load_fdt(hwaddr dram_base, uint64_t mem_size, void *fdt)
+/*
+ * The FDT should be put at the farthest point possible to
+ * avoid overwriting it with the kernel/initrd.
+ *
+ * This function makes an assumption that the DRAM is
+ * contiguous. It also cares about 32-bit systems and
+ * will limit fdt_addr to be addressable by them even for
+ * 64-bit CPUs.
+ *
+ * The FDT is fdt_packed() during the calculation.
+ */
+uint32_t riscv_compute_fdt_addr(hwaddr dram_base, uint64_t mem_size,
+                                void *fdt)
 {
-    uint64_t temp, fdt_addr;
+    uint64_t temp;
     hwaddr dram_end = dram_base + mem_size;
     int ret = fdt_pack(fdt);
     int fdtsize;
@@ -272,11 +284,18 @@ uint64_t riscv_load_fdt(hwaddr dram_base, uint64_t 
mem_size, void *fdt)
      * end of dram or 3GB whichever is lesser.
      */
     temp = (dram_base < 3072 * MiB) ? MIN(dram_end, 3072 * MiB) : dram_end;
-    fdt_addr = QEMU_ALIGN_DOWN(temp - fdtsize, 2 * MiB);
 
-    ret = fdt_pack(fdt);
-    /* Should only fail if we've built a corrupted tree */
-    g_assert(ret == 0);
+    return QEMU_ALIGN_DOWN(temp - fdtsize, 2 * MiB);
+}
+
+/*
+ * 'fdt_addr' is received as hwaddr because boards might put
+ * the FDT beyond 32-bit addressing boundary.
+ */
+void riscv_load_fdt(hwaddr fdt_addr, void *fdt)
+{
+    uint32_t fdtsize = fdt_totalsize(fdt);
+
     /* copy in the device tree */
     qemu_fdt_dumpdtb(fdt, fdtsize);
 
@@ -284,8 +303,6 @@ uint64_t riscv_load_fdt(hwaddr dram_base, uint64_t 
mem_size, void *fdt)
                           &address_space_memory);
     qemu_register_reset_nosnapshotload(qemu_fdt_randomize_seeds,
                         rom_ptr_for_as(&address_space_memory, fdt_addr, 
fdtsize));
-
-    return fdt_addr;
 }
 
 void riscv_rom_copy_firmware_info(MachineState *machine, hwaddr rom_base,
diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c
index 82ae5e7023..dcdbc2cac3 100644
--- a/hw/riscv/microchip_pfsoc.c
+++ b/hw/riscv/microchip_pfsoc.c
@@ -641,8 +641,10 @@ static void microchip_icicle_kit_machine_init(MachineState 
*machine)
         }
 
         /* Compute the fdt load address in dram */
-        fdt_load_addr = riscv_load_fdt(memmap[MICROCHIP_PFSOC_DRAM_LO].base,
-                                       machine->ram_size, machine->fdt);
+        fdt_load_addr = 
riscv_compute_fdt_addr(memmap[MICROCHIP_PFSOC_DRAM_LO].base,
+                                              machine->ram_size, machine->fdt);
+        riscv_load_fdt(fdt_load_addr, machine->fdt);
+
         /* Load the reset vector */
         riscv_setup_rom_reset_vec(machine, &s->soc.u_cpus, firmware_load_addr,
                                   memmap[MICROCHIP_PFSOC_ENVM_DATA].base,
diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index 2fb6ee231f..626d4dc2f3 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -616,9 +616,10 @@ static void sifive_u_machine_init(MachineState *machine)
         kernel_entry = 0;
     }
 
-    /* Compute the fdt load address in dram */
-    fdt_load_addr = riscv_load_fdt(memmap[SIFIVE_U_DEV_DRAM].base,
-                                   machine->ram_size, machine->fdt);
+    fdt_load_addr = riscv_compute_fdt_addr(memmap[SIFIVE_U_DEV_DRAM].base,
+                                           machine->ram_size, machine->fdt);
+    riscv_load_fdt(fdt_load_addr, machine->fdt);
+
     if (!riscv_is_32bit(&s->soc.u_cpus)) {
         start_addr_hi32 = (uint64_t)start_addr >> 32;
     }
diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c
index badc11ec43..88b9fdfc36 100644
--- a/hw/riscv/spike.c
+++ b/hw/riscv/spike.c
@@ -324,9 +324,9 @@ static void spike_board_init(MachineState *machine)
         kernel_entry = 0;
     }
 
-    /* Compute the fdt load address in dram */
-    fdt_load_addr = riscv_load_fdt(memmap[SPIKE_DRAM].base,
-                                   machine->ram_size, machine->fdt);
+    fdt_load_addr = riscv_compute_fdt_addr(memmap[SPIKE_DRAM].base,
+                                           machine->ram_size, machine->fdt);
+    riscv_load_fdt(fdt_load_addr, machine->fdt);
 
     /* load the reset vector */
     riscv_setup_rom_reset_vec(machine, &s->soc[0], memmap[SPIKE_DRAM].base,
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index 4a11b4b010..67c8a01e1d 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -1300,9 +1300,10 @@ static void virt_machine_done(Notifier *notifier, void 
*data)
         start_addr = virt_memmap[VIRT_FLASH].base;
     }
 
-    /* Compute the fdt load address in dram */
-    fdt_load_addr = riscv_load_fdt(memmap[VIRT_DRAM].base,
-                                   machine->ram_size, machine->fdt);
+    fdt_load_addr = riscv_compute_fdt_addr(memmap[VIRT_DRAM].base,
+                                           machine->ram_size, machine->fdt);
+    riscv_load_fdt(fdt_load_addr, machine->fdt);
+
     /* load the reset vector */
     riscv_setup_rom_reset_vec(machine, &s->soc[0], start_addr,
                               virt_memmap[VIRT_MROM].base,
diff --git a/include/hw/riscv/boot.h b/include/hw/riscv/boot.h
index f94653a09b..c529ed2129 100644
--- a/include/hw/riscv/boot.h
+++ b/include/hw/riscv/boot.h
@@ -47,7 +47,8 @@ target_ulong riscv_load_kernel(MachineState *machine,
                                target_ulong firmware_end_addr,
                                symbol_fn_t sym_cb);
 void riscv_load_initrd(MachineState *machine, uint64_t kernel_entry);
-uint64_t riscv_load_fdt(hwaddr dram_start, uint64_t dram_size, void *fdt);
+uint32_t riscv_compute_fdt_addr(hwaddr dram_start, uint64_t dram_size, void 
*fdt);
+void riscv_load_fdt(hwaddr fdt_addr, void *fdt);
 void riscv_setup_rom_reset_vec(MachineState *machine, RISCVHartArrayState 
*harts,
                                hwaddr saddr,
                                hwaddr rom_base, hwaddr rom_size,
-- 
2.39.0




reply via email to

[Prev in Thread] Current Thread [Next in Thread]