[PATCH v4 2/3] riscv/virt: Support using pflash via -blockdev option

[Sunil V L]

Currently, pflash devices can be configured only via -pflash
or if=pflash options. This is the legacy way and the
better way is to use -blockdev as in other architectures.
libvirt also has moved to -blockdev method.

To support -blockdev option, pflash devices need to be
created in instance_init itself. So, update the code to
move the virt_flash_create() to instance_init. Also, use
standard interfaces to detect whether pflash0 is
configured or not.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reported-by: Andrea Bolognani <abologna@redhat.com>
---
 hw/riscv/virt.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index 1187a60d6e..48fcbdbf06 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -1246,6 +1246,8 @@ static void virt_machine_done(Notifier *notifier, void 
*data)
     const char *firmware_name = riscv_default_firmware_name(&s->soc[0]);
     uint32_t fdt_load_addr;
     uint64_t kernel_entry = 0;
+    BlockBackend *pflash_blk0;
+    MemoryRegion *flash_mem;
 
     /*
      * Only direct boot kernel is currently supported for KVM VM,
@@ -1265,21 +1267,22 @@ static void virt_machine_done(Notifier *notifier, void 
*data)
 
     firmware_end_addr = riscv_find_and_load_firmware(machine, firmware_name,
                                                      start_addr, NULL);
-
-    if (drive_get(IF_PFLASH, 0, 0)) {
+    pflash_blk0 = pflash_cfi01_get_blk(s->flash[0]);
+    if (pflash_blk0) {
+        flash_mem = pflash_cfi01_get_memory(s->flash[0]);
         if (machine->firmware && !strcmp(machine->firmware, "none")) {
             /*
              * Pflash was supplied but bios is none, let's overwrite the
              * address we jump to after reset to the base of the flash.
              */
-            start_addr = virt_memmap[VIRT_FLASH].base;
+            start_addr = flash_mem->addr;
         } else {
             /*
              * Pflash was supplied but bios is not none. In this case,
              * base of the flash would contain S-mode payload.
              */
             riscv_setup_firmware_boot(machine);
-            kernel_entry = virt_memmap[VIRT_FLASH].base;
+            kernel_entry = flash_mem->addr;
         }
     }
 
@@ -1497,8 +1500,6 @@ static void virt_machine_init(MachineState *machine)
     sysbus_create_simple("goldfish_rtc", memmap[VIRT_RTC].base,
         qdev_get_gpio_in(DEVICE(mmio_irqchip), RTC_IRQ));
 
-    virt_flash_create(s);
-
     for (i = 0; i < ARRAY_SIZE(s->flash); i++) {
         /* Map legacy -drive if=pflash to machine properties */
         pflash_cfi01_legacy_drive(s->flash[i],
@@ -1525,6 +1526,8 @@ static void virt_machine_instance_init(Object *obj)
 {
     RISCVVirtState *s = RISCV_VIRT_MACHINE(obj);
 
+    virt_flash_create(s);
+
     s->oem_id = g_strndup(ACPI_BUILD_APPNAME6, 6);
     s->oem_table_id = g_strndup(ACPI_BUILD_APPNAME8, 8);
     s->acpi = ON_OFF_AUTO_AUTO;
-- 
2.34.1