[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v4 4/6] target/riscv: Create an KVM AIA irqchip
From: |
Andrew Jones |
Subject: |
Re: [PATCH v4 4/6] target/riscv: Create an KVM AIA irqchip |
Date: |
Tue, 4 Jul 2023 17:12:37 +0200 |
On Wed, Jun 21, 2023 at 02:54:54PM +0000, Yong-Xuan Wang wrote:
> implement a function to create an KVM AIA chip
This is a bit too terse. We should at least summarize the KVM API this
uses.
>
> Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
> Reviewed-by: Jim Shu <jim.shu@sifive.com>
> ---
> target/riscv/kvm.c | 163 +++++++++++++++++++++++++++++++++++++++
> target/riscv/kvm_riscv.h | 6 ++
> 2 files changed, 169 insertions(+)
>
> diff --git a/target/riscv/kvm.c b/target/riscv/kvm.c
> index eb469e8ca5..3dd8467031 100644
> --- a/target/riscv/kvm.c
> +++ b/target/riscv/kvm.c
> @@ -34,6 +34,7 @@
> #include "exec/address-spaces.h"
> #include "hw/boards.h"
> #include "hw/irq.h"
> +#include "hw/intc/riscv_imsic.h"
> #include "qemu/log.h"
> #include "hw/loader.h"
> #include "kvm_riscv.h"
> @@ -41,6 +42,7 @@
> #include "chardev/char-fe.h"
> #include "migration/migration.h"
> #include "sysemu/runstate.h"
> +#include "hw/riscv/numa.h"
>
> static uint64_t kvm_riscv_reg_id(CPURISCVState *env, uint64_t type,
> uint64_t idx)
> @@ -548,3 +550,164 @@ bool kvm_arch_cpu_check_are_resettable(void)
> void kvm_arch_accel_class_init(ObjectClass *oc)
> {
> }
> +
> +char *kvm_aia_mode_str(uint64_t aia_mode)
> +{
> + const char *val;
> +
> + switch (aia_mode) {
> + case KVM_DEV_RISCV_AIA_MODE_EMUL:
> + val = "emul";
> + break;
> + case KVM_DEV_RISCV_AIA_MODE_HWACCEL:
> + val = "hwaccel";
> + break;
> + case KVM_DEV_RISCV_AIA_MODE_AUTO:
> + default:
> + val = "auto";
> + break;
> + };
> +
> + return g_strdup(val);
There's no need to duplicate statically allocated strings unless they need
to be manipulated. These strings do not, so this should just be
const char *kvm_aia_mode_str(uint64_t aia_mode)
{
switch (aia_mode) {
case KVM_DEV_RISCV_AIA_MODE_EMUL:
return "emul";
...
or even just an array
const char *kvm_aia_mode_str[] = { "emul", "hwaccel", "auto" };
> +}
> +
> +void kvm_riscv_aia_create(MachineState *machine,
> + uint64_t aia_mode, uint64_t group_shift,
> + uint64_t aia_irq_num, uint64_t aia_msi_num,
> + uint64_t aplic_base, uint64_t imsic_base,
> + uint64_t guest_num)
> +{
> + int ret, i;
> + int aia_fd = -1;
> + uint64_t default_aia_mode;
> + uint64_t socket_count = riscv_socket_count(machine);
> + uint64_t max_hart_per_socket = 0;
> + uint64_t socket, base_hart, hart_count, socket_imsic_base, imsic_addr;
> + uint64_t socket_bits, hart_bits, guest_bits;
> +
> + aia_fd = kvm_create_device(kvm_state, KVM_DEV_TYPE_RISCV_AIA, false);
> +
> + if (aia_fd < 0) {
> + error_report("Unable to create in-kernel irqchip");
> + exit(1);
> + }
> +
For all the "fail to..." error messages below I would change them to
"failed to..."
> + ret = kvm_device_access(aia_fd, KVM_DEV_RISCV_AIA_GRP_CONFIG,
> + KVM_DEV_RISCV_AIA_CONFIG_MODE,
> + &default_aia_mode, false, NULL);
> + if (ret < 0) {
> + error_report("KVM AIA: fail to get current KVM AIA mode");
> + exit(1);
> + }
> + qemu_log("KVM AIA: default mode is %s\n",
> + kvm_aia_mode_str(default_aia_mode));
> +
> + if (default_aia_mode != aia_mode) {
> + ret = kvm_device_access(aia_fd, KVM_DEV_RISCV_AIA_GRP_CONFIG,
> + KVM_DEV_RISCV_AIA_CONFIG_MODE,
> + &aia_mode, true, NULL);
> + if (ret < 0)
> + warn_report("KVM AIA: fail to set KVM AIA mode");
> + else
> + qemu_log("KVM AIA: set current mode to %s\n",
> + kvm_aia_mode_str(aia_mode));
> + }
> +
> + ret = kvm_device_access(aia_fd, KVM_DEV_RISCV_AIA_GRP_CONFIG,
> + KVM_DEV_RISCV_AIA_CONFIG_SRCS,
> + &aia_irq_num, true, NULL);
> + if (ret < 0) {
> + error_report("KVM AIA: fail to set number of input irq lines");
> + exit(1);
> + }
> +
> + ret = kvm_device_access(aia_fd, KVM_DEV_RISCV_AIA_GRP_CONFIG,
> + KVM_DEV_RISCV_AIA_CONFIG_IDS,
> + &aia_msi_num, true, NULL);
> + if (ret < 0) {
> + error_report("KVM AIA: fail to set number of msi");
> + exit(1);
> + }
> +
> + socket_bits = find_last_bit(&socket_count, BITS_PER_LONG) + 1;
> + ret = kvm_device_access(aia_fd, KVM_DEV_RISCV_AIA_GRP_CONFIG,
> + KVM_DEV_RISCV_AIA_CONFIG_GROUP_BITS,
> + &socket_bits, true, NULL);
> + if (ret < 0) {
> + error_report("KVM AIA: fail to set group_bits");
> + exit(1);
> + }
> +
> + ret = kvm_device_access(aia_fd, KVM_DEV_RISCV_AIA_GRP_CONFIG,
> + KVM_DEV_RISCV_AIA_CONFIG_GROUP_SHIFT,
> + &group_shift, true, NULL);
> + if (ret < 0) {
> + error_report("KVM AIA: fail to set group_shift");
> + exit(1);
> + }
> +
> + guest_bits = guest_num == 0 ? 0 :
> + find_last_bit(&guest_num, BITS_PER_LONG) + 1;
> + ret = kvm_device_access(aia_fd, KVM_DEV_RISCV_AIA_GRP_CONFIG,
> + KVM_DEV_RISCV_AIA_CONFIG_GUEST_BITS,
> + &guest_bits, true, NULL);
> + if (ret < 0) {
> + error_report("KVM AIA: fail to set guest_bits");
> + exit(1);
> + }
> +
> + ret = kvm_device_access(aia_fd, KVM_DEV_RISCV_AIA_GRP_ADDR,
> + KVM_DEV_RISCV_AIA_ADDR_APLIC,
> + &aplic_base, true, NULL);
> + if (ret < 0) {
> + error_report("KVM AIA: fail to set the base address of APLIC");
> + exit(1);
> + }
> +
> + for (socket = 0; socket < socket_count; socket++) {
> + socket_imsic_base = imsic_base + socket * (1U << group_shift);
> + hart_count = riscv_socket_hart_count(machine, socket);
> + base_hart = riscv_socket_first_hartid(machine, socket);
> +
> + if (max_hart_per_socket < hart_count) {
> + max_hart_per_socket = hart_count;
> + }
> +
> + for (i = 0; i < hart_count; i++) {
> + imsic_addr = socket_imsic_base + i * IMSIC_HART_SIZE(guest_bits);
> + ret = kvm_device_access(aia_fd, KVM_DEV_RISCV_AIA_GRP_ADDR,
> + KVM_DEV_RISCV_AIA_ADDR_IMSIC(i +
> base_hart),
> + &imsic_addr, true, NULL);
> + if (ret < 0) {
> + error_report("KVM AIA: fail to set the address of IMSICs");
("KVM AIA: failed to set the IMSIC address for hart index %d", i)
> + exit(1);
> + }
> + }
> + }
> +
> + hart_bits = find_last_bit(&max_hart_per_socket, BITS_PER_LONG) + 1;
> + ret = kvm_device_access(aia_fd, KVM_DEV_RISCV_AIA_GRP_CONFIG,
> + KVM_DEV_RISCV_AIA_CONFIG_HART_BITS,
> + &hart_bits, true, NULL);
> + if (ret < 0) {
> + error_report("KVM AIA: fail to set hart_bits");
> + exit(1);
> + }
> +
> + if (kvm_has_gsi_routing()) {
> + for (uint64_t idx = 0; idx < aia_irq_num + 1; ++idx) {
> + /* KVM AIA only has one APLIC instance */
> + kvm_irqchip_add_irq_route(kvm_state, idx, 0, idx);
> + }
> + kvm_gsi_routing_allowed = true;
> + kvm_irqchip_commit_routes(kvm_state);
> + }
> +
> + ret = kvm_device_access(aia_fd, KVM_DEV_RISCV_AIA_GRP_CTRL,
> + KVM_DEV_RISCV_AIA_CTRL_INIT,
> + NULL, true, NULL);
> + if (ret < 0) {
> + error_report("KVM AIA: initialized fail");
"KVM AIA: failed to initialize"
> + exit(1);
> + }
> +}
> diff --git a/target/riscv/kvm_riscv.h b/target/riscv/kvm_riscv.h
> index ed281bdce0..a61f552d1d 100644
> --- a/target/riscv/kvm_riscv.h
> +++ b/target/riscv/kvm_riscv.h
> @@ -21,5 +21,11 @@
>
> void kvm_riscv_reset_vcpu(RISCVCPU *cpu);
> void kvm_riscv_set_irq(RISCVCPU *cpu, int irq, int level);
> +char *kvm_aia_mode_str(uint64_t aia_mode);
> +void kvm_riscv_aia_create(MachineState *machine,
> + uint64_t aia_mode, uint64_t group_shift,
> + uint64_t aia_irq_num, uint64_t aia_msi_num,
> + uint64_t aplic_base, uint64_t imsic_base,
> + uint64_t guest_num);
>
> #endif
> --
> 2.17.1
>
>
Thanks,
drew
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [PATCH v4 4/6] target/riscv: Create an KVM AIA irqchip,
Andrew Jones <=