[PATCH 04/10] hw/riscv: virt: Add PCIe HIGHMEM in memmap

[Sunil V L]

PCIe High MMIO base is actually dynamic and fixed at
run time based on the RAM configured. Currently, this is
not part of the memmap and kept in separate static variable
in virt.c. However, ACPI code also needs this information
to populate DSDT. So, once the base is discovered, merge
this into the final memmap which can be used to create
ACPI tables later.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
---
 hw/riscv/virt.c         | 31 ++++++++++++++++++++++++++++++-
 include/hw/riscv/virt.h |  9 +++++++--
 2 files changed, 37 insertions(+), 3 deletions(-)

diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index f6067db8ec..7aee06f021 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -84,6 +84,22 @@ static const MemMapEntry virt_memmap[] = {
 
 static MemMapEntry virt_high_pcie_memmap;
 
+/*
+ * virt_memmap doesn't include floating High Mem IO address entry. To enable
+ * code organization in multiple files (ex: ACPI), it is better to have single
+ * memmap which has complete information.
+ *
+ * VIRT_HIGH_PCIE_MMIO is always greater than the last memmap entry and hence
+ * full_virt_memmap is capable of holding both virt_memmap and
+ * VIRT_HIGH_PCIE_MMIO entry.
+ *
+ * The values for these floating entries will be updated when top of RAM is
+ * discovered.
+ */
+static MemMapEntry full_virt_memmap[] = {
+    [VIRT_HIGH_PCIE_MMIO] =     { 0x0, 0 },
+};
+
 #define VIRT_FLASH_SECTOR_SIZE (256 * KiB)
 
 static PFlashCFI01 *virt_flash_create1(RISCVVirtState *s,
@@ -1444,7 +1460,20 @@ static void virt_machine_init(MachineState *machine)
             ROUND_UP(virt_high_pcie_memmap.base, virt_high_pcie_memmap.size);
     }
 
-    s->memmap = virt_memmap;
+    /*
+     * Initialize the floating values in full memory map
+     */
+    full_virt_memmap[VIRT_HIGH_PCIE_MMIO].base = virt_high_pcie_memmap.base;
+    full_virt_memmap[VIRT_HIGH_PCIE_MMIO].size = virt_high_pcie_memmap.size;
+
+    s->memmap = full_virt_memmap;
+    /*
+     * Copy the base virt_memmap entries to full memmap
+     */
+    for (i = 0; i < ARRAY_SIZE(virt_memmap); i++) {
+        s->memmap[i] = virt_memmap[i];
+    }
+
 
     /* register system main memory (actual RAM) */
     memory_region_add_subregion(system_memory, memmap[VIRT_DRAM].base,
diff --git a/include/hw/riscv/virt.h b/include/hw/riscv/virt.h
index 00c22492a7..1d7ddf5df0 100644
--- a/include/hw/riscv/virt.h
+++ b/include/hw/riscv/virt.h
@@ -60,7 +60,7 @@ struct RISCVVirtState {
     char *oem_id;
     char *oem_table_id;
     OnOffAuto acpi;
-    const MemMapEntry *memmap;
+    MemMapEntry *memmap;
     PCIBus *bus;
 };
 
@@ -84,7 +84,12 @@ enum {
     VIRT_PCIE_MMIO,
     VIRT_PCIE_PIO,
     VIRT_PLATFORM_BUS,
-    VIRT_PCIE_ECAM
+    VIRT_PCIE_ECAM,
+    VIRT_LAST_MEMMAP /* Keep this entry always last */
+};
+
+enum {
+    VIRT_HIGH_PCIE_MMIO = VIRT_LAST_MEMMAP,
 };
 
 enum {
-- 
2.39.2