Re: [PATCH 04/10] hw/riscv: virt: Add PCIe HIGHMEM in memmap

[Igor Mammedov]

On Wed, 12 Jul 2023 22:09:37 +0530
Sunil V L <sunilvl@ventanamicro.com> wrote:

> PCIe High MMIO base is actually dynamic and fixed at
> run time based on the RAM configured. Currently, this is
> not part of the memmap and kept in separate static variable
> in virt.c. However, ACPI code also needs this information
> to populate DSDT. So, once the base is discovered, merge
> this into the final memmap which can be used to create
> ACPI tables later.

can ACPI code fetch virt_high_pcie_memmap at runtime from
host bridge (like we do in pc/q35)?


> Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
> ---
>  hw/riscv/virt.c         | 31 ++++++++++++++++++++++++++++++-
>  include/hw/riscv/virt.h |  9 +++++++--
>  2 files changed, 37 insertions(+), 3 deletions(-)
> 
> diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
> index f6067db8ec..7aee06f021 100644
> --- a/hw/riscv/virt.c
> +++ b/hw/riscv/virt.c
> @@ -84,6 +84,22 @@ static const MemMapEntry virt_memmap[] = {
>  
>  static MemMapEntry virt_high_pcie_memmap;
>  
> +/*
> + * virt_memmap doesn't include floating High Mem IO address entry. To enable
> + * code organization in multiple files (ex: ACPI), it is better to have 
> single
> + * memmap which has complete information.
> + *
> + * VIRT_HIGH_PCIE_MMIO is always greater than the last memmap entry and hence
> + * full_virt_memmap is capable of holding both virt_memmap and
> + * VIRT_HIGH_PCIE_MMIO entry.
> + *
> + * The values for these floating entries will be updated when top of RAM is
> + * discovered.
> + */
> +static MemMapEntry full_virt_memmap[] = {
> +    [VIRT_HIGH_PCIE_MMIO] =     { 0x0, 0 },
> +};
> +
>  #define VIRT_FLASH_SECTOR_SIZE (256 * KiB)
>  
>  static PFlashCFI01 *virt_flash_create1(RISCVVirtState *s,
> @@ -1444,7 +1460,20 @@ static void virt_machine_init(MachineState *machine)
>              ROUND_UP(virt_high_pcie_memmap.base, virt_high_pcie_memmap.size);
>      }
>  
> -    s->memmap = virt_memmap;
> +    /*
> +     * Initialize the floating values in full memory map
> +     */
> +    full_virt_memmap[VIRT_HIGH_PCIE_MMIO].base = virt_high_pcie_memmap.base;
> +    full_virt_memmap[VIRT_HIGH_PCIE_MMIO].size = virt_high_pcie_memmap.size;
> +
> +    s->memmap = full_virt_memmap;
> +    /*
> +     * Copy the base virt_memmap entries to full memmap
> +     */
> +    for (i = 0; i < ARRAY_SIZE(virt_memmap); i++) {
> +        s->memmap[i] = virt_memmap[i];
> +    }
> +
>  
>      /* register system main memory (actual RAM) */
>      memory_region_add_subregion(system_memory, memmap[VIRT_DRAM].base,
> diff --git a/include/hw/riscv/virt.h b/include/hw/riscv/virt.h
> index 00c22492a7..1d7ddf5df0 100644
> --- a/include/hw/riscv/virt.h
> +++ b/include/hw/riscv/virt.h
> @@ -60,7 +60,7 @@ struct RISCVVirtState {
>      char *oem_id;
>      char *oem_table_id;
>      OnOffAuto acpi;
> -    const MemMapEntry *memmap;
> +    MemMapEntry *memmap;
>      PCIBus *bus;
>  };
>  
> @@ -84,7 +84,12 @@ enum {
>      VIRT_PCIE_MMIO,
>      VIRT_PCIE_PIO,
>      VIRT_PLATFORM_BUS,
> -    VIRT_PCIE_ECAM
> +    VIRT_PCIE_ECAM,
> +    VIRT_LAST_MEMMAP /* Keep this entry always last */
> +};
> +
> +enum {
> +    VIRT_HIGH_PCIE_MMIO = VIRT_LAST_MEMMAP,
>  };
>  
>  enum {