qemu-riscv
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH for-8.2] hw/riscv/virt.c: do create_fdt() earlier, add finalize_f


From: Daniel Henrique Barboza
Subject: [PATCH for-8.2] hw/riscv/virt.c: do create_fdt() earlier, add finalize_fdt()
Date: Fri, 10 Nov 2023 14:25:59 -0300

Commit 49554856f0 fixed a problem, where TPM devices were not appearing
in the FDT, by delaying the FDT creation up until virt_machine_done().
This create a side effect (see gitlab #1925) - devices that need access
to the '/chosen' FDT node during realize() stopped working because, at
that point, we don't have a FDT.

This happens because our FDT creation is monolithic, but it doesn't need
to be. We can add the needed FDT components for realize() time and, at
the same time, do another FDT round where we account for dynamic sysbus
devices.  In other words, the problem fixed by 49554856f0 could also be
fixed by postponing only create_fdt_sockets() and its dependencies,
leaving everything else from create_fdt() to be done during init().

Split the FDT creation in two parts:

- create_fdt(), now moved back to virt_machine_init(), will create FDT
  nodes that doesn't depend on additional (dynamic) devices from the
  sysbus;

- a new finalize_fdt() step is added, where create_fdt_sockets() and
  friends is executed, accounting for the dynamic sysbus devices that
  were added during realize().

This will make both use cases happy: TPM devices are still working as
intended, and devices such as 'guest-loader' have a FDT to work on
during realize().

Fixes: 49554856f0 ("riscv: Generate devicetree only after machine 
initialization is complete")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1925
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
---
 hw/riscv/virt.c | 71 +++++++++++++++++++++++++++++--------------------
 1 file changed, 42 insertions(+), 29 deletions(-)

diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index c7fc97e273..d2eac24156 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -962,7 +962,6 @@ static void create_fdt_uart(RISCVVirtState *s, const 
MemMapEntry *memmap,
         qemu_fdt_setprop_cells(ms->fdt, name, "interrupts", UART0_IRQ, 0x4);
     }
 
-    qemu_fdt_add_subnode(ms->fdt, "/chosen");
     qemu_fdt_setprop_string(ms->fdt, "/chosen", "stdout-path", name);
     g_free(name);
 }
@@ -1023,11 +1022,29 @@ static void create_fdt_fw_cfg(RISCVVirtState *s, const 
MemMapEntry *memmap)
     g_free(nodename);
 }
 
-static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap)
+static void finalize_fdt(RISCVVirtState *s)
 {
-    MachineState *ms = MACHINE(s);
     uint32_t phandle = 1, irq_mmio_phandle = 1, msi_pcie_phandle = 1;
     uint32_t irq_pcie_phandle = 1, irq_virtio_phandle = 1;
+
+    create_fdt_sockets(s, virt_memmap, &phandle, &irq_mmio_phandle,
+                       &irq_pcie_phandle, &irq_virtio_phandle,
+                       &msi_pcie_phandle);
+
+    create_fdt_virtio(s, virt_memmap, irq_virtio_phandle);
+
+    create_fdt_pcie(s, virt_memmap, irq_pcie_phandle, msi_pcie_phandle);
+
+    create_fdt_reset(s, virt_memmap, &phandle);
+
+    create_fdt_uart(s, virt_memmap, irq_mmio_phandle);
+
+    create_fdt_rtc(s, virt_memmap, irq_mmio_phandle);
+}
+
+static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap)
+{
+    MachineState *ms = MACHINE(s);
     uint8_t rng_seed[32];
 
     ms->fdt = create_device_tree(&s->fdt_size);
@@ -1047,28 +1064,16 @@ static void create_fdt(RISCVVirtState *s, const 
MemMapEntry *memmap)
     qemu_fdt_setprop_cell(ms->fdt, "/soc", "#size-cells", 0x2);
     qemu_fdt_setprop_cell(ms->fdt, "/soc", "#address-cells", 0x2);
 
-    create_fdt_sockets(s, memmap, &phandle, &irq_mmio_phandle,
-                       &irq_pcie_phandle, &irq_virtio_phandle,
-                       &msi_pcie_phandle);
-
-    create_fdt_virtio(s, memmap, irq_virtio_phandle);
-
-    create_fdt_pcie(s, memmap, irq_pcie_phandle, msi_pcie_phandle);
-
-    create_fdt_reset(s, memmap, &phandle);
-
-    create_fdt_uart(s, memmap, irq_mmio_phandle);
-
-    create_fdt_rtc(s, memmap, irq_mmio_phandle);
-
-    create_fdt_flash(s, memmap);
-    create_fdt_fw_cfg(s, memmap);
-    create_fdt_pmu(s);
+    qemu_fdt_add_subnode(ms->fdt, "/chosen");
 
     /* Pass seed to RNG */
     qemu_guest_getrandom_nofail(rng_seed, sizeof(rng_seed));
     qemu_fdt_setprop(ms->fdt, "/chosen", "rng-seed",
                      rng_seed, sizeof(rng_seed));
+
+    create_fdt_flash(s, memmap);
+    create_fdt_fw_cfg(s, memmap);
+    create_fdt_pmu(s);
 }
 
 static inline DeviceState *gpex_pcie_init(MemoryRegion *sys_mem,
@@ -1257,15 +1262,12 @@ static void virt_machine_done(Notifier *notifier, void 
*data)
     uint64_t kernel_entry = 0;
     BlockBackend *pflash_blk0;
 
-    /* load/create device tree */
-    if (machine->dtb) {
-        machine->fdt = load_device_tree(machine->dtb, &s->fdt_size);
-        if (!machine->fdt) {
-            error_report("load_device_tree() failed");
-            exit(1);
-        }
-    } else {
-        create_fdt(s, memmap);
+    /*
+     * An user provided dtb must include everything, including
+     * dynamic sysbus devices. Our FDT needs to be finalized.
+     */
+    if (machine->dtb == NULL) {
+        finalize_fdt(s);
     }
 
     /*
@@ -1541,6 +1543,17 @@ static void virt_machine_init(MachineState *machine)
     }
     virt_flash_map(s, system_memory);
 
+    /* load/create device tree */
+    if (machine->dtb) {
+        machine->fdt = load_device_tree(machine->dtb, &s->fdt_size);
+        if (!machine->fdt) {
+            error_report("load_device_tree() failed");
+            exit(1);
+        }
+    } else {
+        create_fdt(s, memmap);
+    }
+
     s->machine_done.notify = virt_machine_done;
     qemu_add_machine_init_done_notifier(&s->machine_done);
 }
-- 
2.41.0




reply via email to

[Prev in Thread] Current Thread [Next in Thread]