qemu-riscv
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH 2/2] hw/intc/riscv_aplic: Fix in_clrip[x] read emulation


From: Daniel Henrique Barboza
Subject: Re: [PATCH 2/2] hw/intc/riscv_aplic: Fix in_clrip[x] read emulation
Date: Wed, 6 Mar 2024 09:50:36 -0300
User-agent: Mozilla Thunderbird



On 3/6/24 06:57, Anup Patel wrote:
The reads to in_clrip[x] registers return rectified input values of the
interrupt sources.

A rectified input value of an interrupt source is defined by the section
"4.5.2 Source configurations (sourcecfg[1]–sourcecfg[1023])" of the RISC-V
AIA specification as:
"rectified input value = (incoming wire value) XOR (source is inverted)"

Update the riscv_aplic_read_input_word() implementation to match the above.

Fixes: e8f79343cfc8 ("hw/intc: Add RISC-V AIA APLIC device emulation")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---

Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>

  hw/intc/riscv_aplic.c | 17 +++++++++++++++--
  1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c
index 775bb96164..6a7fbfa861 100644
--- a/hw/intc/riscv_aplic.c
+++ b/hw/intc/riscv_aplic.c
@@ -162,7 +162,7 @@ static bool is_kvm_aia(bool msimode)
  static uint32_t riscv_aplic_read_input_word(RISCVAPLICState *aplic,
                                              uint32_t word)
  {
-    uint32_t i, irq, ret = 0;
+    uint32_t i, irq, sourcecfg, sm, raw_input, irq_inverted, ret = 0;
for (i = 0; i < 32; i++) {
          irq = word * 32 + i;
@@ -170,7 +170,20 @@ static uint32_t 
riscv_aplic_read_input_word(RISCVAPLICState *aplic,
              continue;
          }
- ret |= ((aplic->state[irq] & APLIC_ISTATE_INPUT) ? 1 : 0) << i;
+        sourcecfg = aplic->sourcecfg[irq];
+        if (sourcecfg & APLIC_SOURCECFG_D) {
+            continue;
+        }
+
+        sm = sourcecfg & APLIC_SOURCECFG_SM_MASK;
+        if (sm == APLIC_SOURCECFG_SM_INACTIVE) {
+            continue;
+        }
+
+        raw_input = (aplic->state[irq] & APLIC_ISTATE_INPUT) ? 1 : 0;
+        irq_inverted = (sm == APLIC_SOURCECFG_SM_LEVEL_LOW ||
+                        sm == APLIC_SOURCECFG_SM_EDGE_FALL) ? 1 : 0;
+        ret |= (raw_input ^ irq_inverted) << i;
      }
return ret;



reply via email to

[Prev in Thread] Current Thread [Next in Thread]