Re: Users-prolog Digest, Vol 76, Issue 2

[Duncan Patton a Campbell]

Howdy Daniel, all?

I recently aquired a Sparc Ultra 5 on which I've installed
OpenBSD (yes, i know it is not supported, but...).  When
I attempt to compile it breaks on BipsPl/foreign.wam as
follows:

[babayaga:/usr/local/src/gprolog-1.3.2/src] # gmake
(cd EnginePl; gmake config)
gmake[1]: Entering directory `/usr/local/src/gprolog-1.3.2/src/EnginePl'
gmake[1]: Nothing to be done for `config'.
gmake[1]: Leaving directory `/usr/local/src/gprolog-1.3.2/src/EnginePl'
. ./SETVARS;for i in TopComp EnginePl Wam2Ma Ma2Asm Linedit BipsPl Pl2Wam Fd2C 
EngineFD BipsFD;do (cd $i; gmake) || exit 1; done;\
        (cd TopComp; gmake gprolog)
gmake[1]: Entering directory `/usr/local/src/gprolog-1.3.2/src/TopComp'
gmake[1]: Nothing to be done for `first'.
gmake[1]: Leaving directory `/usr/local/src/gprolog-1.3.2/src/TopComp'
gmake[1]: Entering directory `/usr/local/src/gprolog-1.3.2/src/EnginePl'
gmake[1]: Nothing to be done for `all'.
gmake[1]: Leaving directory `/usr/local/src/gprolog-1.3.2/src/EnginePl'
gmake[1]: Entering directory `/usr/local/src/gprolog-1.3.2/src/Wam2Ma'
gmake[1]: Nothing to be done for `all'.
gmake[1]: Leaving directory `/usr/local/src/gprolog-1.3.2/src/Wam2Ma'
gmake[1]: Entering directory `/usr/local/src/gprolog-1.3.2/src/Ma2Asm'
gmake[1]: Nothing to be done for `all'.
gmake[1]: Leaving directory `/usr/local/src/gprolog-1.3.2/src/Ma2Asm'
gmake[1]: Entering directory `/usr/local/src/gprolog-1.3.2/src/Linedit'
gmake[1]: Nothing to be done for `all'.
gmake[1]: Leaving directory `/usr/local/src/gprolog-1.3.2/src/Linedit'
gmake[1]: Entering directory `/usr/local/src/gprolog-1.3.2/src/BipsPl'
gplc -c foreign.wam
compilation failed
gmake[1]: *** [foreign.o] Error 1
gmake[1]: Leaving directory `/usr/local/src/gprolog-1.3.2/src/BipsPl'
gmake: *** [all] Error 1
[babayaga:/usr/local/src/gprolog-1.3.2/src] # uname -a
OpenBSD babayaga.neotext.ca 4.5 GENERIC#1898 sparc64
[babayaga:/usr/local/src/gprolog-1.3.2/src] # 

I am somewhat at a loss as to whether to even attempt to figure out
what has gone wrong (unsupported OS that usually works ok due to being
intentionally bog-standard): the only clue I have is where it breaks
in BipsPl.

babayaga:/usr/local/src/gprolog-1.3.2/src/BipsPl] # ls -lt | more
total 5160
-rw-------  1 root  wheel  591384 Sep  2 21:46 ma2asm.core
-rw-r--r--  1 root  wheel   28160 Sep  2 21:46 bc_supp.o
-rw-r--r--  1 root  wheel    1824 Sep  2 21:46 callinf_supp.o
-rw-r--r--  1 root  wheel   10584 Sep  2 21:46 dynam_supp.o
-rw-r--r--  1 root  wheel   57808 Sep  2 21:46 write_supp.o
-rw-r--r--  1 root  wheel   25024 Sep  2 21:45 parse_supp.o
-rw-r--r--  1 root  wheel   41096 Sep  2 21:45 scan_supp.o
-rw-r--r--  1 root  wheel   43632 Sep  2 21:45 stream_supp.o
-rw-r--r--  1 root  wheel    8968 Sep  2 21:45 term_supp.o
-rw-r--r--  1 root  wheel    3928 Sep  2 21:45 pred_supp.o
-rw-r--r--  1 root  wheel   14864 Sep  2 21:45 foreign_supp.o
-rw-r--r--  1 root  wheel   36520 Sep  2 21:45 c_supp.o
-rw-r--r--  1 root  wheel   44360 Sep  2 21:44 error_supp.o
-rw-r--r--  1 root  wheel    4853 Sep  2 10:43 Makefile
-rw-r--r--  1 root  wheel    1218 Feb 10  2009 all_pl_bips.wam
-rw-r--r--  1 root  wheel   66745 Feb 10  2009 debugger.wam

...

Any suggestions would be appreciated.

Thanks,

Dhu



On Wed, 02 Sep 2009 12:00:32 -0400
address@hidden wrote:

> Send Users-prolog mailing list submissions to
>       address@hidden
> 
> To subscribe or unsubscribe via the World Wide Web, visit
>       http://lists.gnu.org/mailman/listinfo/users-prolog
> or, via email, send a message with subject or body 'help' to
>       address@hidden
> 
> You can reach the person managing the list at
>       address@hidden
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Users-prolog digest..."
> 
> 
> Today's Topics:
> 
>    1. Re: --query-goal problem with gprolog-1.3.1-mingw (Daniel Diaz)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Wed, 02 Sep 2009 15:38:39 +0200
> From: Daniel Diaz <address@hidden>
> Subject: Re: --query-goal problem with gprolog-1.3.1-mingw
> To: Fred Bapst <address@hidden>
> Cc: address@hidden
> Message-ID: <address@hidden>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> 
> Can you try the last snaphsot please ?
> 
> http://gprolog.univ-paris1.fr/unstable/gprolog-20090902.tgz
> 
> you need to recompile it under mingw
> 
> Daniel
> 
> 
> Fred Bapst wrote:
> > Hello,
> >
> > I'm a fan of gprolog, and I have a problem with gprolog-1.3.1-mingw (ok,
> > I'm not proud of the OS I use...) :
> >
> >  prompt> gprolog --init-goal nl
> >
> > works fine, but the following commands crash :
> >
> >  prompt> gprolog --entry-goal nl
> >  prompt> gprolog --query-goal nl
> >
> > Everything works fine with the MSVC build of gprolog-1.3.1 (but I need 
> > mingw).
> >
> > Thanks in advance.
> >
> >
> > _______________________________________________
> > Users-prolog mailing list
> > address@hidden
> > http://lists.gnu.org/mailman/listinfo/users-prolog
> >
> 
> 
> -- 
> Ce message a ete verifie par MailScanner
> pour des virus ou des polluriels et rien de
> suspect n'a ete trouve.
> 
> 
> 
> 
> 
> ------------------------------
> 
> _______________________________________________
> Users-prolog mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/users-prolog
> 
> 
> End of Users-prolog Digest, Vol 76, Issue 2
> *******************************************