[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH] Minor improvements for tests `acloca*.test'.
From: |
Stefano Lattarini |
Subject: |
Re: [PATCH] Minor improvements for tests `acloca*.test'. |
Date: |
Wed, 11 Aug 2010 01:28:44 +0200 |
User-agent: |
KMail/1.13.3 (Linux/2.6.30-2-686; KDE/4.4.4; i686; ; ) |
At Sunday 08 August 2010, Ralf Wildenhues wrote:
> * Stefano Lattarini wrote on Sun, Jun 27, 2010 at 04:48:03PM CEST:
> > Another testsuite-tweaking patch. This time, the changes should
> > be small and simple.
> >
> > Minor improvements for tests `acloca*.test'.
>
> This is not ok.
Being forced to rescan this patch some time after having written it,
I must admit that the noise-to-improvement ratio is way too high.
So OK, let's drop most of this patch. However, I'd like to retain
a couple of changes more than the ones blessed by you here.
WDYT about the trimmed-down attached patch?
Regards,
Stefano
-*-*-*-
Tweak and/or extend some `acloca*.test' tests.
* tests/aclocal8.test: Ensure verbose printing of captured
output.
* tests/aclocal.test: Likewise. Also, add trailing `:'
command.
* tests/acloca19.test: Likewise.
* tests/aclocal5.test: Add trailing `:' command, and prefer
`$me' over hard-coded test name.
* tests/aclocal6.test: Likewise.
* tests/aclocal18.test: Add trailing `:' command, and make
some grepping slighty stricter.
* tests/acloca14.test: Likewise. Also, prefer `diff' over
`cmp', and add some "cosmetic" blank lines.
From d0dd88f36a8ccc9b3c7b799b0e95b55c98fee40d Mon Sep 17 00:00:00 2001
From: Stefano Lattarini <address@hidden>
Date: Wed, 11 Aug 2010 01:21:29 +0200
Subject: [PATCH] Tweak and/or extend some `acloca*.test' tests.
* tests/aclocal8.test: Ensure verbose printing of captured
output.
* tests/aclocal.test: Likewise. Also, add trailing `:'
command.
* tests/acloca19.test: Likewise.
* tests/aclocal5.test: Add trailing `:' command, and prefer
`$me' over hard-coded test name.
* tests/aclocal6.test: Likewise.
* tests/aclocal18.test: Add trailing `:' command, and make
some grepping slighty stricter.
* tests/acloca14.test: Likewise. Also, prefer `diff' over
`cmp', and add some "cosmetic" blank lines.
---
ChangeLog | 16 ++++++++++++++++
tests/acloca14.test | 16 ++++++++++++----
tests/acloca18.test | 6 ++++--
tests/acloca19.test | 4 +++-
tests/aclocal.test | 8 +++++---
tests/aclocal5.test | 4 +++-
tests/aclocal6.test | 8 +++++---
tests/aclocal8.test | 4 ++--
8 files changed, 50 insertions(+), 16 deletions(-)
diff --git a/ChangeLog b/ChangeLog
index e39a5b8..5453722 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,19 @@
+2010-08-10 Stefano Lattarini <address@hidden>
+
+ Tweak and/or extend some `acloca*.test' tests.
+ * tests/aclocal8.test: Ensure verbose printing of captured
+ output.
+ * tests/aclocal.test: Likewise. Also, add trailing `:'
+ command.
+ * tests/acloca19.test: Likewise.
+ * tests/aclocal5.test: Add trailing `:' command, and prefer
+ `$me' over hard-coded test name.
+ * tests/aclocal6.test: Likewise.
+ * tests/aclocal18.test: Add trailing `:' command, and make
+ some grepping slighty stricter.
+ * tests/acloca14.test: Likewise. Also, prefer `diff' over
+ `cmp', and add some "cosmetic" blank lines.
+
2010-08-09 Stefano Lattarini <address@hidden>
Tweak and extend tests `pr[!0-9]*.test'.
diff --git a/tests/acloca14.test b/tests/acloca14.test
index a4e86d7..1bdf7c7 100755
--- a/tests/acloca14.test
+++ b/tests/acloca14.test
@@ -29,6 +29,7 @@ END
echo 'm4_include([a.m4])' > acinclude.m4
echo 'm4_include([b.m4])' > a.m4
+
cat >b.m4 <<EOF
m4_include([c.m4])
AC_DEFUN([AM_PROG_LIBTOOL],
@@ -38,6 +39,7 @@ AC_REQUIRE([SOMETHING_ELSE])dnl
AC_DEFUN([SOMETHING])
EOF
+
echo 'm4_include([d.m4])' > c.m4
echo 'AC_DEFUN([SOMETHING_ELSE])' >d.m4
@@ -88,26 +90,32 @@ $sleep
cat >>c.m4 <<\EOF
AC_DEFUN([FOO], [ANOTHER_MACRO])
EOF
+
$MAKE
+
# Because c.m4 has changed, aclocal.m4 must have been rebuilt.
test `ls -1t aclocal.m4 stamp | sed 1q` = aclocal.m4
# However, since FOO is not used, f.m4 should not be included
# and the contents of aclocal.m4 should remain the same
-cmp aclocal.m4 stamp
-
+diff aclocal.m4 stamp
# If FOO where to be used, that would be another story, of course.
cat >>configure.in <<EOF
FOO
EOF
+
cp aclocal.m4 stamp
$sleep
+
$MAKE
-grep 'defs/f.m4' aclocal.m4
+
+$FGREP defs/f.m4 aclocal.m4
$MAKE testdist2
# Make sure aclocal diagnose missing included files with correct `file:line:'.
rm -f b.m4
$ACLOCAL 2>stderr && { cat stderr >&2; Exit 1; }
cat stderr >&2
-grep 'a.m4:1:.*b.m4.*does not exist' stderr
+grep 'a\.m4:1: .*b\.m4.*does not exist' stderr
+
+:
diff --git a/tests/acloca18.test b/tests/acloca18.test
index c38fac4..9826892 100755
--- a/tests/acloca18.test
+++ b/tests/acloca18.test
@@ -88,7 +88,7 @@ ACLOCAL_TESTSUITE_FLAGS='-I 4 -I 1 -I 2'
rm -f foo
$ACLOCAL --install 2>stderr && { cat stderr >&2; Exit 1; }
cat stderr >&2
-grep AM_MACRO2 stderr
+grep 'macro.*AM_MACRO2.*not found' stderr
ACLOCAL_TESTSUITE_FLAGS='-I 4 -I 1'
rm -f foo
@@ -115,4 +115,6 @@ cat stderr >&2
cat stdout
grep '#serial 456' stdout
test ! -f 4/m1.m4
-grep 'installing.*4/m1.m4' stderr
+grep 'installing.*4/m1\.m4' stderr
+
+:
diff --git a/tests/acloca19.test b/tests/acloca19.test
index accad81..a198d9a 100755
--- a/tests/acloca19.test
+++ b/tests/acloca19.test
@@ -41,9 +41,11 @@ END
$ACLOCAL
$AUTOCONF
-./configure >stdout
+./configure >stdout || { cat stdout; Exit 1; }
cat stdout
grep GREPME stdout
grep 'aconfig\.ac' aclocal.m4 && Exit 1
grep 'bconfig\.ac' aclocal.m4 && Exit 1
grep with-grepme configure
+
+:
diff --git a/tests/aclocal.test b/tests/aclocal.test
index d3437d2..da80d08 100755
--- a/tests/aclocal.test
+++ b/tests/aclocal.test
@@ -27,18 +27,20 @@ test -f fred
$ACLOCAL --output 2>stderr && { cat stderr >&2; Exit 1; }
cat stderr >&2
grep 'option.*--output.*an argument' stderr
-grep help stderr
+grep '[Tt]ry.*--help.*for more information' stderr
$ACLOCAL --unknown-option 2>stderr && { cat stderr >&2; Exit 1; }
cat stderr >&2
grep 'unrecognized.*--unknown-option' stderr
-grep help stderr
+grep '[Tt]ry.*--help.*for more information' stderr
$ACLOCAL --ver 2>stderr && { cat stderr >&2; Exit 1; }
cat stderr >&2
grep 'unrecognized.*--ver' stderr
-grep help stderr
+grep '[Tt]ry.*--help.*for more information' stderr
$ACLOCAL --versi
test "`$ACLOCAL --print-ac-dir`" = "$testaclocaldir"
+
+:
diff --git a/tests/aclocal5.test b/tests/aclocal5.test
index 5cd8231..b206587 100755
--- a/tests/aclocal5.test
+++ b/tests/aclocal5.test
@@ -60,7 +60,7 @@ grep GREPME sub/Makefile
# Make sure configure dependencies are distributed.
$MAKE distdir
-test -f aclocal5-1.0/m4/moredefs.m4
+test -f $me-1.0/m4/moredefs.m4
# Change the definition of AM_TEST to check that its new definition is
# used. Check that AC_DEFUN_ONCE is caught.
@@ -68,3 +68,5 @@ echo 'AC_DEFUN_ONCE([AM_TEST], [AC_SUBST(__$1__)])' >
m4/moredefs.m4
$MAKE
grep 'm4/moredefs\.m4' aclocal.m4
grep '__GREPME__' configure
+
+:
diff --git a/tests/aclocal6.test b/tests/aclocal6.test
index 266d64b..ea6bac3 100755
--- a/tests/aclocal6.test
+++ b/tests/aclocal6.test
@@ -75,9 +75,9 @@ grep METOO sub/Makefile
# Make sure configure dependencies are distributed.
$MAKE distdir
-test -f aclocal6-1.0/m4/moredefs.m4
-test -f aclocal6-1.0/m4/somedefs.m4
-test -f aclocal6-1.0/acinclude.m4
+test -f $me-1.0/m4/moredefs.m4
+test -f $me-1.0/m4/somedefs.m4
+test -f $me-1.0/acinclude.m4
# Make sure maintainer-clean works in VPATH builds.
# (This is unrelated to the rest of this test.)
@@ -89,3 +89,5 @@ $MAKE maintainer-clean
test ! -d ../autom4te.cache
test ! -f Makefile
test ! -f sub/Makefile
+
+:
diff --git a/tests/aclocal8.test b/tests/aclocal8.test
index ac10aff..d935f4f 100755
--- a/tests/aclocal8.test
+++ b/tests/aclocal8.test
@@ -34,9 +34,9 @@ EOF
echo 'AC_DEFUN([MACRO1],)' >m4/macro1.m4
echo 'AC_DEFUN([MACRO2], [AC_REQUIRE([AM_UNUSED_MACRO])])' >m4/macro2.m4
-$ACLOCAL -I m4 >output 2>&1
-cat output
+$ACLOCAL -I m4 >output 2>&1 || { cat output; Exit 1; }
test 0 = `wc -l <output`
grep macro1.m4 aclocal.m4
grep macro2.m4 aclocal.m4 && Exit 1
+
:
--
1.7.1