[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avr-gcc-list] ATMega32 fuse bit problem
From: |
Csroluxx |
Subject: |
Re: [avr-gcc-list] ATMega32 fuse bit problem |
Date: |
Sun, 11 Nov 2007 10:59:51 -0800 (PST) |
James Pascoe wrote:
>
> Hi All,
>
> Apologies for the following question which is very OT, but there is a
> good chance you guys can help.
>
> I am using an ATMega32 and inadvertantly programmed the fuse bits wrong
> :-( ... instead of setting
> the fuse bits to use a 16 Mhz external crystal as the clock source, I
> programmed the chip to use the low frequency
> crystal oscillator setting. Of course now, I can not program the device
> anymore.
>
> Does anybody know if there is any way (other than getting hold of a
> 32.768 Khz crystal) that I can recover the device ?
>
> Many thanks for any suggestions,
>
> James
>
>
> _______________________________________________
> AVR-GCC-list mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/avr-gcc-list
>
>
Hi you can use one from old digital clock (or new one)
=)
--
View this message in context:
http://www.nabble.com/ATMega32-fuse-bit-problem-tf4281995.html#a13694560
Sent from the AVR - gcc mailing list archive at Nabble.com.
- Re: [avr-gcc-list] ATMega32 fuse bit problem,
Csroluxx <=