[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: GRUB fails to boot Win98
From: |
Graham Smith |
Subject: |
RE: GRUB fails to boot Win98 |
Date: |
Wed, 22 May 2002 22:59:15 +0100 |
Okuji,
As requested I downloaded and built GRUB from the CVS repository at 10:15
pm (British Summer Time) tonight. Including the debug statement and
booting into Windows from a GRUB boot floppy gave the additional output:
Reading the offset 0x80 in the drive 0x0
and the boot completed successfully.
When booting from GRUB installed on the hard drive I obtained the message:
Reading the offset 0x80 in the drive 0x1a0b9a4
and a new error message which read:
Error 18: Selected cylinder exceeds maximum supported by BIOS
regards
Graham
-----Original Message-----
From: Yoshinori K. Okuji [SMTP:address@hidden
Sent: 22 May 2002 08:05
To: Graham Smith
Cc: address@hidden
Subject: Re: GRUB fails to boot Win98
Hello Graham,
At Mon, 20 May 2002 23:33:45 +0100,
Graham Smith wrote:
> Could you advise how I can assist in debugging this?
Sure. First, please get the current version from the CVS. Then compile
it and test it both with a floppy and with a hard disk. When testing
it, turn on the debug mode by running the command "debug". Now the
command "boot" should show more messages, like "reading the offset
0x???? in the drive 0x??". Let me know what is displayed.
Thanks,
Okuji