[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: help with "Read Error"?
From: |
Thierry Laronde |
Subject: |
Re: help with "Read Error"? |
Date: |
Thu, 30 May 2002 20:02:31 +0200 |
User-agent: |
Mutt/1.2.5i |
On Thu, May 30, 2002 at 05:46:25AM -0700, Weber, Aaron wrote:
> Can anyone help me troubleshoot this...
>
> I have RH 7.3 installed on an IBM 36GB SCSI drive (Adaptec controller).
> There WAS another SCSI drive in the box that had no Linux partitions on it,
> and it was flaking-out. So I removed it and made sure the line was
> terminated correctly.
>
> Now, when the box boots, the BIOS and SCSI card init correctly. But I get
> the following at the end, and then the box hangs...
>
> GRUB Loading Phase2...Read Error
Are the INT13 SCSI extensions disable in your BIOS?
Cheers,
--
Thierry Laronde (Alceste) <address@hidden>
Key fingerprint = 0FF7 E906 FBAF FE95 FD89 250D 52B1 AE95 6006 F40C