|
From: | Weber, Aaron |
Subject: | RE: help with "Read Error"? |
Date: | Thu, 30 May 2002 11:16:15 -0700 |
I believe they are ENABLED...should I change this?
Thanks for your time!
--Aaron
-----Original Message-----
From: Thierry Laronde
To: Weber, Aaron
Cc: 'address@hidden'
Sent: 5/30/2002 11:02 AM
Subject: Re: help with "Read Error"?
On Thu, May 30, 2002 at 05:46:25AM -0700, Weber, Aaron wrote:
> Can anyone help me troubleshoot this...
>
> I have RH 7.3 installed on an IBM 36GB SCSI drive (Adaptec
controller).
> There WAS another SCSI drive in the box that had no Linux partitions
on it,
> and it was flaking-out. So I removed it and made sure the line was
> terminated correctly.
>
> Now, when the box boots, the BIOS and SCSI card init correctly. But I
get
> the following at the end, and then the box hangs...
>
> GRUB Loading Phase2...Read Error
Are the INT13 SCSI extensions disable in your BIOS?
Cheers,
--
Thierry Laronde (Alceste) <address@hidden>
Key fingerprint = 0FF7 E906 FBAF FE95 FD89 250D 52B1 AE95 6006 F40C
[Prev in Thread] | Current Thread | [Next in Thread] |