[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Problem booting into that other OS using grub

From: Nicolas Mailhot
Subject: Re: Problem booting into that other OS using grub
Date: Sat, 29 May 2004 21:52:02 +0200

In case this helps, here is the drive info :

# /sbin/hdparm -iI /dev/hde
 Model=IBM-DJNA-371350, FwRev=J76OA30K, SerialNo=GM0GMHP0111
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=34
 BuffType=DualPortCache, BuffSize=1966kB, MaxMultSect=16, MultSect=off
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=26520480
 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4
 DMA modes:  mdma0 mdma1 mdma2
 UDMA modes: udma0 udma1 udma2 udma3 *udma4
 AdvancedPM=no WriteCache=enabled
 Drive conforms to: ATA/ATAPI-4 T13 1153D revision 17:  1 2 3 4
 * signifies the current active mode
ATA device, with non-removable media
        Model Number:       IBM-DJNA-371350
        Serial Number:      GM0GMHP0111
        Firmware Revision:  J76OA30K
        Used: ATA/ATAPI-4 T13 1153D revision 17
        Supported: 4 3 2 1 & some of 5
        Logical         max     current
        cylinders       16383   16383
        heads           16      16
        sectors/track   63      63
        CHS current addressable sectors:   16514064
        LBA    user addressable sectors:   26520480
        device size with M = 1024*1024:       12949 MBytes
        device size with M = 1000*1000:       13578 MBytes (13 GB)
        LBA, IORDY(can be disabled)
        Buffer size: 1966.0kB   bytes avail on r/w long: 34     Queue
depth: 32
        Standby timer values: spec'd by Standard, no device specific
        R/W multiple sector transfer: Max = 16  Current = 0
        DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4
             Cycle time: min=120ns recommended=120ns
        PIO: pio0 pio1 pio2 pio3 pio4
             Cycle time: no flow control=240ns  IORDY flow control=120ns
        Enabled Supported:
           *    NOP cmd
           *    READ BUFFER cmd
           *    WRITE BUFFER cmd
           *    Host Protected Area feature set
                Release interrupt
           *    Look-ahead
           *    Write cache
           *    Power Management feature set
                Security Mode feature set
           *    SMART feature set
                Address Offset Reserved Area Boot
           *    READ/WRITE DMA QUEUED
           *    DOWNLOAD MICROCODE cmd
        not     enabled
        not     locked
        not     frozen
        not     expired: security count
        not     supported: enhanced erase
        18min for SECURITY ERASE UNIT.

Nicolas Mailhot

Attachment: signature.asc
Description: Ceci est une partie de message numériquement signée

fedora-list mailing list
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]