[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [Discuss-gnuradio] Mayday, Mayday, flex2400 is down
From: |
Bahn William L Civ USAFA/DFCS |
Subject: |
RE: [Discuss-gnuradio] Mayday, Mayday, flex2400 is down |
Date: |
Tue, 26 Sep 2006 15:42:40 -0600 |
Matt,
Just want to get clarification on one point:
> I am not responsible. This includes, but is not limited to:
> Transmitting directly into the receive port
Does this apply to the BasicTX and BasicRX boards as well. I called the
day we ordered this board asking about what kind of antennae was
available for these daughterboards and was told that they were
essentially baseband I/O boards. I then specifically asked if the output
of the BasicTX board could be piped directly into the BasicRX board and
was told yes. Is this the case for these particular daughterboards?
> -----Original Message-----
> From: address@hidden
> [mailto:address@hidden On
> Behalf Of Matt Ettus
> Sent: Tuesday, September 26, 2006 3:33 PM
> To: hanwen
> Cc: Discuss gnuradio
> Subject: Re: [Discuss-gnuradio] Mayday, Mayday, flex2400 is down
>
> hanwen wrote:
>
> > Help!
> >
> > Today, I connect two flex2400 directly through a coaxial wire. Maybe
> > the gain is too high, the receiving one don't work any more.
> > One I plug the broken one on the mother board, the python graph
seems
> > not running and no data is transferred from usrp to PC. I see
nothing
> > on the fft window of usrp_fft.py.
> > I wonder which part of the daughter borad is broken and if it could
be
> > repaired.
> > I hope Ettus Research can provide me some repair service and it's
free
> > cause the board is just bought about 5 months ago ;)
> >
>
> Hanwen,
>
> I don't understand why you think this should be a free repair.
> Everything you purchased from me worked at the time you received it,
and
> has continued to work for 5 months. The only reason it no longer
works
> is that you did something which:
>
> 1) I have repeatedly stated should not be done.
>
> 2) Would have destroyed just about any receiver you are likely to
> find.
>
>
> Just to be clear for everyone out there -- if the products you buy
from
> me don't work WHEN THEY ARRIVE, I will replace them. If you break
them,
> I am not responsible. This includes, but is not limited to:
>
> Lightning strikes to your equipment
> You dropping metal objects onto powered circuit boards
> Spilling your coffee on them
> Transmitting directly into the receive port
> Not taking adequate static safety precautions
> Using power supplies other than the ones I provide
>
> Please also note that it is EXTREMELY rare for items to arrive broken,
> since everything is tested immediately before shipment.
>
> Matt
>
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
- [Discuss-gnuradio] Mayday, Mayday, flex2400 is down, hanwen, 2006/09/26
- Re: [Discuss-gnuradio] Mayday, Mayday, flex2400 is down, Lamar Owen, 2006/09/26
- Re: [Discuss-gnuradio] Mayday, Mayday, flex2400 is down, Matt Ettus, 2006/09/26
- Re: [Discuss-gnuradio] Mayday, Mayday, flex2400 is down, Alex Gross, 2006/09/26
- RE: [Discuss-gnuradio] Mayday, Mayday, flex2400 is down,
Bahn William L Civ USAFA/DFCS <=
- Re: [Discuss-gnuradio] Mayday, Mayday, flex2400 is down, Matt Ettus, 2006/09/26
- Re: [Discuss-gnuradio] Mayday, Mayday, flex2400 is down, hanwen, 2006/09/26
- Re: [Discuss-gnuradio] Mayday, Mayday, flex2400 is down, Lin Huang, 2006/09/26