[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Flipping problem
From: |
isaacgerg |
Subject: |
[Discuss-gnuradio] Flipping problem |
Date: |
Wed, 23 Jul 2008 09:02:52 -0700 (PDT) |
I am sending a known sequence of samples from one USRP to another using the
Basix RX/TX d'boards setting the frequency to 24e6.
When I rx the sequence, the correlation of it keeps flipping, but not in a
way that suggests residual carrier. It seems as if I am experiencing an
instantaneous flip.
My gain on both the RX and TX is set to 500. The signal amplitude I rx is
~1200. When I run the GRC model, the Rx says I have no residual carrier,
invert is set to false, the dxc frequency is set to -24e6 and the baseband
to zero. On the TX side, I have these same values with the exception of the
dxc freq, it is not set to 24e6. Why the flip?? What do all these things
mean???
Is 24e6 a bad freq to use with the basic TX/Rx?
Thanks in advance!
--
View this message in context:
http://www.nabble.com/Flipping-problem-tp18614309p18614309.html
Sent from the GnuRadio mailing list archive at Nabble.com.
- [Discuss-gnuradio] Flipping problem,
isaacgerg <=