Hi All,
I followed the instructions on
http://gnuradio.org/redmine/wiki/gnuradio/UbuntuInstall to install
gnuradio-3.3.0 onto Ubuntu-10.04 LTS. I used qwt-5.2.1, boost_1_37_0, and
all other packages from synaptic package manager. After ./configure
--with-boost=$BOOST_PREFIX, I got:
The following GNU Radio components have been successfully configured:
config
gruel
gnuradio-core
usrp
usrp2
gr-usrp
gr-usrp2
gr-msdd6000
gr-audio-alsa
gr-audio-oss
gr-atsc
gr-cvsd-vocoder
gr-gpio
gr-gsm-fr-vocoder
gr-noaa
gr-pager
gr-radar-mono
gr-radio-astronomy
gr-trellis
gr-video-sdl
gr-wxgui
gr-qtgui
gr-sounder
gr-utils
gnuradio-examples
grc
docs
You my now run the make command to build these components.
*********************************************************************
The following components were skipped either because you asked not
to build them or they didn't pass configuration checks:
gcell
gr-gcell
gr-audio-jack
gr-audio-osx
gr-audio-portaudio
gr-audio-windows
gr-comedi
These components will not be built.
Configured GNU Radio release 3.3.0 for build.
Meanwhile, there is no error during the installation. And the USRP is
recognized by "ls -lR /dev/bus/usb | grep usrp", I got "crw-rw---- 1 root
usrp 189, 129 2010-08-25 13:12 002".
However, when I tried to run "./usrp_benchmark_usb.py", I got the error that
"ImportError: cannot import name usrp". I also found that there is nothing
under directory /usr/local/lib/python2.6/site-packages. How should I fix
this problem? Can anyone give me some advice?
Thanks in advance,
Brook